4pc Sealant Finishing Kit
Ideal for smoothing sealant without the need for masking tape.
45 degree Edge Profile : width 6 / 8 / 10 / 12 / 15mm
Round Profile / Radius : 7 / 10.5 / 14.5mm
Ideal for sealing different areas at different angles.
Designed for long-term use and durability.
May be used on most types of DIY sealants :
joint / craft or floor sealant / acrylic sealant and resin sealant etc.

300mm Silicon Wiper Blade
Tile Wiper Blade
Silicon Squeegee
Suitable for Glass / Marble Tops and Ceramic Tiles

4pc 20in. / 500mm Flexible Drain Cleaners
Flexible hooked drain un-blockers for
drawing out matted hair and un-clogging waste pipes.

1.5M Drain Cleaner
Flexi-wire with Handle and 'Cork Screw' end
Waste Pipe Un-Blocker

5M Flexible Drain / Waste Pipe Un-Blocker
Head Size : 17mm
Coil Diameter : 10mm
5M reach for improved access.
Robust coiled steel construction for effective unblocking.
Cranked handle for improved blockage clearance.

12pc Drain Rod Set
100mm rubber plunger
50mm double worm screw
10 x 920mm Polypropylene drain rods
For General Purpose Domestic Drain Cleaning

Vacuum Suction Cup

6in. / 150mm Diameter Rubber Plunger
with plastic handle

Drain Blaster Suction Gun
Power Drain Cleaner with 4 Adaptors
Integrated Pump Handle

Drain Doctor
2 Interchangeable Plunger Cups
Suitable for - Toilets / Bathtubs / Showers / Sinks / Drains
Clears away blockages without chemicals

2pc Radiator Bleed Key Set
Designed specifically to fit the square bleed valves
found on most radiators, these keys are the only tool
that can safely release trapped air that causes cold spots
and annoying gurgling noises.
Compact traditional design for easy access in tight spaces.
Solid Brass.

2pc Radiator Bleed Key Set
Designed to fit the square bleed valves
found on most radiators, these keys are for
safely releasing the trapped air that causes
cold spots and annoying gurgling noises.
Traditional design for easy access in tight spaces.

Radiator Key for Domestic Radiators

4 Way Utility Key for Plumbers
Used for meter cupboards stop cocks / taps and radiators

2pc Manhole Cover Lifting Key Set
Used for lifting and replacing standard manhole covers
Heavy Duty heat treated carbon steel
Approx 6.5in. / 170mm

Manhole Cover Lifting Key
Used for lifting and replacing standard manhole covers
Heavy Duty heat treated carbon steel
Length : 18in. / 480mm

Stop Tap Key / Clutch type

Tap Reseating Tool
with 3 Steel Cutters
Sizes : 11/16 | 3/4 | 1in. for all 1/2 and 3/4in. Taps

Water Pressure Test Gauge
For accurately measuring mains water pressure,
helps diagnose plumbing issues, compatible with most taps.
Corrosion Resistant Pressure Gauge with
Braided Stainless Steel Hose : 300mm
Pressure range : 0 - 160psi / 0 - 11bar
Tap Fitting : 3/4in. BSP
1/2in. Adaptor

Screw Hole Punch 32mm Diameter with three-point cutting tip.
For cable entry or water tap fittings in stainless steel sinks etc.
Suitable for aluminium or stainless steel.
19mm Hexagonal Drive

Screw Hole Punch 35mm Diameter with three-point cutting tip.
For cable entry or water tap fittings in stainless steel sinks etc.
Suitable for aluminium or stainless steel.
19mm Hexagonal Drive

11in. Caulking Gun
Steel Skeleton Frame
Handle with Plunger and Release Lever
Suitable for most 380 - 425ml Cartridges

Heavy Duty Caulking Gun
11in. | 275mm
Steel Frame and Plunger
with cast aluminium handle.
Suitable for most sealant cartridges.

Dual Sealant Gun for 225 / 250ML
Cartridge gun for two-component adhesives
with quick-change plastic pressure plates.
Ergonomic design for comfortable working
with minimal trigger pressure.

Expanding Foam Gun
With Stainless steel barrel
Teflon coated aluminium alloy body.
Supplied with 4 Plastic Nozzles.
PP handle and trigger.
Individually tested by air pressure.
Control knob and trigger allow foam bead adjustment.
For use with professional size foam cans.

10pc Expanding Foam Gun Nozzle Set
Designed to attach to expanding foam guns
Enables filling in hard to reach areas
5 x long | 5 x short
Suitable for CT5264

2pc Thread Sealing Tape
For sealing pipe threads and pipe flange joints.
Ideal for Plumbers / Engineers / Mechains and DIY.
Use on Non-Drinking water and Compressed Air Fittings

17mm Deep Socket for Strut Channel - 1/2in.Dr
For Unistrut type channel fixing bolts.
Hex diameter : 17mm
Overall Length : 72mm
Chrome-Molybdenum
Unistrut is a trademark of Unistrut International Corporation

19mm Deep Socket for Strut Channel - 1/2in.Dr
For Unistrut type channel fixing bolts.
Hex diameter : 17mm
Overall Length : 72mm
Chrome-Molybdenum
Unistrut is a trademark of Unistrut International Corporation

Hub Fan Blade Blower Wheel Puller
Specialized HVAC maintenance tool used to easily
remove stubborn or rusted-on fan blades
and blower wheels from motor shafts
With Puller / Forcing Screw
Hex Wrench / Hooks and Fixing Screws

5 litre Galvanised Steel Bucket
with wooden handle

12 litre Galvanised Steel Bucket
with wooden handle

12 litre Stainless Steel Bucket
Seamless Mult-Purpose Bucket with Integral Handle
Ideal for a variety of Household / Garden and Hobby uses
Also suitable for Catering

Stainless Steel Bucket Lid
for CT0617 - 12L Stainless Steel Bucket

10 litre Rubber Bucket

14 litre Rubber Bucket

40 litre Rubber Bucket / Mixing Trough