Building Profile Gauge Brick Tape
Width : 37.5mm | Length : 33M
For marking up Building Profiles to improve accurate bricklaying.
Adhesive / Laminated and Waterproof tape is marked up for
Bricks and blocks : 75mm / 150mm / 225mm.
Its easy to apply and remove.

Building Profile Gauge Brick Tape
Width : 48mm | Length : 60M
For marking up Building Profiles to improve accurate bricklaying.
Adhesive / Laminated and Waterproof tape is marked up for
Bricks and blocks : 75mm / 150mm / 225mm / 300mm / 375mm
Its easy to apply and remove.

Bitumen Flashing Tape for Sealing
Size : 100mm x 10M
Suitable for general repairs and sealing use.
Weatherproof / Easy to use / Tough but flexible.
Lasts up to 15 years
Construction Temperature : +5D - +40D
Working Temperature : -40D - +80D

Bitumen Flashing Tape for Sealing
Size : 150mm x 10M
Suitable for general repairs and sealing use.
Weatherproof / Easy to use / Tough but flexible.
Lasts up to 15 years
Construction Temperature : +5D - +40D
Working Temperature : -40D - +80D

Dual function mortar or tile grouting gun - easy to use and load.
Ideal for grouting tiles or filing gaps between bricks / slabs
and re-pointing walls.
Gun - 380mm Aluminium body with metal ratchet handle.
With Straight Nozzle | Angled Nozzle | Grouting Nozzle
Spare Plunger and Filling Scoop

20V Li-ion Cordless Paddle Mixer
with Brushless Motor
Includes 20V Battery and 4.0Ah Fast Charger.
Rated Voltage : 20V DC | 105W
No Load Speed : 0-450 / 0-720/min
Thread : M14
Diameter of Paddle : 120mm
Mixing Paddle Length : 600mm
Charger Input Voltage: 230V AC | 50 / 60Hz
Charging Time : 1H

Electric Mortar Mixer
Voltage : 110V / 1200W / 60Hz
Speed : 0 - 500rpm / 0 - 700rpm
Mortar Mixer Paddle : 120mm / 590mm Long
Supplied with spanners and spare carbon brush.
Soft start with Variable speed.
Will mix up to 80 litres in volume.
For mixing high density mortar and aggregate building materials thoroughly.
Replacement paddle available - CT1434

Electric Mortar Mixer
Voltage : 230V / 1200W / 50Hz
Speed : 0 - 500rpm / 0 - 700rpm
Mortar Mixer Paddle : 120mm / 590mm Long
Supplied with spanners and spare carbon brush.
Soft start with Variable speed.
Will mix up to 80 litres in volume.
For mixing high density mortar and aggregate building materials thoroughly.
Replacement paddle available - CT1434

Mortar Mixer Bar
2 part Mixing Paddle for Electric Mortar Mixers CT0949 and CT0950

'D' Type Brick Holding Tongs
Adjustable 400 to 725mm
Automatic Jaws
Designed to carry 6 - 10 bricks

Universal Brick Grab
Can be attached to a loading crane, mini-excavator etc.
by means of hoisting belts or chains.
With large gripping range and adjustable support as standard.
Working Capacity : 500kg
Gripping Range : 330mm - 700mm
Suitable for handling all types of concrete products such as slabs,
steel-strapped bricks, block kerb stones & paving blocks.

Brick Holder - Y-Type
When the Clamp is lifted the Jaws Automatically Close Clamping the Bricks Solidly in Place
Max Length 1300mm

Brick Cutter
This is a Manual Paving Block / Brick Cutter or Splitter
Cutting Length up to 400mm
Cutting Depth : 10 - 100mm

TCT Masonry Saw
Heavy Duty with 25 Teeth and 13 Tungsten Carbide Tips.
Rust Resistant Coated Blade with Rubber / ABS Handle.
Use to cut Brick / Aerated Concrete Blocks / Slate and Cement Products.

300mm Petrol Disc Cutter
58cc 2 stroke air cooled single cylinder Engine
Rated output power : 2.4Kw
Idling Speed : 3000rpm
Fuel tank capacity : 550ml
Max cutting depth : 105mm
Blade diameter : 300mm
Bore diameter : 25.4mm
Blade speed : 4800rpm

Petrol Disc Cutter
Engine Size : 196cc
Engine Type : Air-Cooled
Fuel Tank Capacity : 3.6 Litres
Blade size : 14in. / 350mm
Max. Cutting Depth : 105mm
Water Tank Capacity : 14 Litres
Max. Engine Power : 4.1kW
Max. Power Speed : 3600rpm
Declared Maximum Torque Speed : 2500rpm

14L Dust Suppression Water Tank
Quick-release water connector ensures consistent water flow.
Pump handle with 3 metre long hose.
Pressure release valve to maintain high pressure.
Ideal for suppressing dust created by disc cutters like CT5342.

350mm Masonry / Tile Saw Bench
Motor : 230V / 50Hz
Input : 2.2KW
Speed : 2800rpm
Dimensions L x W x H: 1200 x 600 x 1260mm
Table Size : 530 x 430mm
Cutting Disc : 350mm x 25.4mm
Cutting Height : 110mm - 90 degrees / 72mm - 45 degrees
Cutting Length : 700mm

NOTE ! - This saw table will NOT run from an ordinary UK 13amp plug.

Block Paving Gap Wedge Tool
900mm Long with Soft Grip Rubber Grips.
To enable repairs or adjustment.
Hammer point to knock in to tight spaces.
Foot lug for applying weight into gaps.
Hardened steel wedge.
Used to gap or space out blocks from block paving etc..

4 External Building Profile Line Holders
Plastic line holder clips for external builders brick profiles
Fit any profiles that are 50mm x 50mm

Mortar Spike
For holding the internal profile steady by pushing into perp joint
and tightening screw on the profile.
Solid Steel / Zinc Plated

Dutch Pin / Masonry Clamp
250mm Corrosion resistant steel shaft.
Ideal for hammering into plaster and most masonry work.
No more nailing boards.
Makes easy levelling of work before final tap with hammer to tighten.
Ideal for profiles that need fixing temporarily to the wall.
Excellent hold ability and quick release by just tapping the outer end.

Dutch Pin / Masonry Clamp
300mm Corrosion resistant steel shaft.
Ideal for hammering into plaster and most masonry work.
No more nailing boards.
Makes easy levelling of work before final tap with hammer to tighten.
Ideal for profiles that need fixing temporarily to the wall.
Excellent hold ability and quick release by just tapping the outer end.

Aluminium Double Pinned Dori Block
51mm x 50mm to make the brick gauge.
Double pins making the dori left and right handed.
Compatible with 40 / 50 / 50.8mm steel or aluminium profiles.
Dori Blocks - also known as Brick Alignment Blocks or Line Blocks,
typically used in pairs to hold a masonry line in place,
preventing deviation and irregularities.

Aluminium Double Pinned Dori Block
51mm x 75mm to make the brick gauge.
Double pins making the dori left and right handed.
Compatible with 40 / 50 / 50.8mm steel or aluminium profiles.
Dori Blocks - also known as Brick Alignment Blocks or Line Blocks,
typically used in pairs to hold a masonry line in place,
preventing deviation and irregularities.

Bricklaying Dori Block with Lock Bolt - Long Sided
Making the first brick sit exactly flush with the string line.
Dori Blocks - also known as Brick Alignment Blocks or Line Blocks,
typically used in pairs to hold a masonry line in place,
preventing deviation and irregularities.

Bricklaying Profile Block Dolly
Size : 450mm x 450mm.
Works with all profiles as-long as you are using 50 x 50mm box.
Nice and light weight and a great added extra to have.
This is for one dolly only not a pair.

Setting Device Blakes Building Profiles
Setting device as supplied with new profiles.
Can be supplied as setting device plus screw for ease of posting.

2in. / 50mm Bricklaying Profile Clamp
T-Bolt Screw / 80mm Thread
Solid Steel / Zinc Plated

103mm Bricklaying Profile Clamp
External / Small - half brick

103mm Bricklaying Profile Clamp
Internal / Small - half brick

130mm Internal Profile Clamp
With 40 x 40mm Eye
Zinc Plated Solid Steel
New thread insert - threading system

5.5in. / 140mm Bricklaying Profile Clamp
T-Bolt Screw / 80mm Thread
Solid Steel / Zinc Plated

175mm T-Type Bricklaying Profile Clamp
Zinc plated to prevent corrosion.

7in. / 178mm Bricklaying Profile Clamp
T-Bolt Screw / 80mm Thread
Solid Steel / Zinc Plated

8in. / 200mm Bricklaying Profile Clamp
T-Bolt Screw / 80mm Thread
Solid Steel / Zinc Plated

9in. / 230mm External Profile Clamp
for External Building Profile

265mm T-Type Bricklaying Profile Clamp
Zinc plated to prevent corrosion.

12in. / 300mm Bricklaying Profile Clamp
T-Bolt Screw / 80mm Thread
Solid Steel / Zinc Plated

12in. / 300mm Bricklaying Profile Clamp
T-Bolt Screw / 80mm Thread
Internal
Solid Steel / Zinc Plated

13in. / 330mm Bricklaying Profile Clamp
Sliding with
T-Bolt Screw / 80mm Thread
Solid Steel / Zinc Plated

13.75in. / 350mm Bricklaying Profile Clamp
Nail-On
T-Bolt Screw - 80mm
Solid Steel / Zinc Plated

14in. / 355mm External Profile Clamp
for External Building Profile

440mm External Bricklaying Profile Clamp
Suits one block / two bricks.
Bar thread length : 80mm - with thumbscrew
to allow clamp to be securely fixed to profile.
Zinc plated to prevent corrosion.

18in. / 450mm Bricklaying Profile Clamp
Nail-On
T-Bolt Screw - 80mm
Solid Steel with 3 Nails.

18in. / 460mm External Profile Clamp
for External Building Profile

22in. / 560mm Bricklaying Profile Clamp
Sliding with
T-Bolt Screw / 80mm Thread
Solid Steel / Zinc Plated

4pc Setting Screw Set
With Wing Nuts for Blakes External Profile.
Replacement zinc plated setting screws with foot.
Note : Not suitable for the Reverse External Profile

2 x External Building Profile Stabiliser Clips
Clips on to the 50mm profile
to ensure quick reliable set up

Brick Clamp
Top Clamp to secure the profile for full / double brick jobs.
Suitable for standard 2in. / 50.5mm or 60mm profiles.
Maximum cavity width of 130mm.