20pc Rotary Sanding Set
13. 19. 25. 32mm Diameter Drums
with 16 Assorted 80 and 120 Grit sleeves

24pc Surface Preparation Set
1 / 2 / 3in. Abrasive Pads
40 / 60 / 80 / 100 / 180 Grit
3 Arbors / Backing Pads 6mm Shanks
Suitable for removing scratches / rust / corrosion / gasket material

35pc Sanding Disc Set
50mm Silicon Carbide Discs : Fine | Medium | Coarse
50mm Aluminium Oxide Discs : 60 | 80 | 100 Grit
50mm Nylon / Carborundum Grinding Discs
46mm Arbor with 6mm shank
Maximum Speed : 12000rpm

14pc Wheel Hub Grinder Set
10 Grinding Discs 40mm diameter / 14mm deep.
Drive Connector : 1/4in. / 6mm shank
1/2in.Dr - 8mm Hex Adaptor
Made from Nylon and carborundum.
For removing rust and road debris from wheel hubs and brake discs.

7pc Wheel Hub Grinder Set
6 Grinding Discs 40mm diameter / 14mm deep.
Drive Connector : 6mm shank
Made from Nylon and carborundum.
For removing rust and road debris from wheel hubs and brake discs.

Impact Drive Stud & Hub Cleaning Tool Set for HGVs
For Air or Power Impact Wrenches with 1/2in.Dr
Suitable for HGV wheel studs up to 28mm diameter
with a maximum length of 80mm.
With Impact Drive Locking Sleeve and Disc Adaptor.
6 Abrasive Discs :
50 x 12 | 50 x 13 | 50 x 14mm.
60 x 16 | 60 x 22 | 60 x 28mm.

Rotary Abrasive Hub Cleaning Tool - 1/2in.Dr
Suitable for vehicle wheel hubs up to 150mm diameter
Optimized for wheel hubs with enlarged inner 90mm diameter.
For quick and easy removal of dirt and rust from wheel hubs
and brake discs with wheel support bolt.
Quick cleaning of the contact surfaces.
For use with air impact or power / cordless tools - 1/2in.Drive
Interchangeable abrasive velcro disc replacement - CT6186

Rotary Abrasive Hub Cleaning Disc
or Grinding Wheel
Replacement Disc for CT6185
Inner diameter : 90mm / Outer diameter 150mm

Abrasive Disc
Diameter : 100mm
Shank : 6mm
For use with Power Drills.
Silicon carbide coated nylon mesh with steel arbor.
For rust or paint removal / descaling / de-burring
and preparation of welding seams or graffiti removal.
For metal or stone cleaning / surface preparation and fabrication tasks.

Abrasive Disc
Diameter : 115mm
Shank : 6mm
For use with Power Drills.
Silicon carbide coated nylon mesh with steel arbor.
For rust or paint removal / descaling / de-burring
and preparation of welding seams or graffiti removal.
For metal or stone cleaning / surface preparation and fabrication tasks.

Abrasive Disc
Diameter : 100mm
Bore : 22.2mm
For use with angle grinders.
Silicon carbide coated nylon mesh
with fibreglass backing disc and steel arbor.
For rust or paint removal / descaling / de-burring
and preparation of welding seams or graffiti removal.
For metal or stone cleaning / surface preparation and fabrication tasks.

Abrasive Disc
Diameter : 115mm
Bore : 22.2mm
For use with angle grinders.
Silicon carbide coated nylon mesh with fibreglass backing disc and steel arbor.
For rust or paint removal / descaling / de-burring
and preparation of welding seams or graffiti removal.
For metal or stone cleaning / surface preparation and fabrication tasks.

Stripe Off Disc - 88mm Diameter
Ideal for the quick removal of pin striping, decals, stickers, adhesive tape,
and residue from car bodywork without damaging the surface,
also suitable to use on glass, metal and wood.
Supplied with adaptor for use with electric drill.
Width : 15mm
Drive Shaft Adaptor : 5/16in. to 6mm diameter.
Max. Speed : 4000rpm

Fluted Stripe Off Disc - 90mm Diameter
With heat dissipating pattern for removing pin striping, decals, stickers,
adhesive tape and residue from car bodywork without damaging the surface.
Supplied with adaptor for use with electric drill.
Width : 20mm
Drive Shaft Adaptor : 5/16in. to 6mm diameter
Max. Speed : 4000rpm

Fluted Stripe Off Disc - 100mm Diameter
With heat dissipating pattern for removing pin striping, decals, stickers,
adhesive tape and residue from car bodywork without damaging the surface.
Supplied with adaptor for use with electric drill.
Width : 25mm
Drive Shaft Adaptor : 5/16in. to 6mm diameter
Max. Speed : 4000rpm