32pc HSS Tap and Die Set
Sizes : M3 to M12
Tap Wrench : M3-12.
Die Wrench : 25mm 0/D
Screwdriver and Screw Pitch Gauge

111pc Tap and Die Set
70 - Taper and Plug Taps : M2 x 0.4 to M18 x 1.5.
35 - Hexagon Dies : M2 x 0.4 to M18 x 1.5.
2 in 1 Tap Holders / Small / Big.
2 in 1 Hex Die Holders - 1in. / 1-7/16in.
Hex keys

115pc Tap and Die Set
48 Tap and Dies in the following sizes
4-40 to 12-24 | 1/4 -20 to 3/4 -16 | 0.4 to 18 x 2.5
1/8NPT27 | 1/8BSP28 | 1/4NPT18 | 1/4BSP19
Tap and Die handles | T Type Wrench
Centre punch and Drills - 2.5 | 3.3 | 4.2 | 5 | 6.8
Screwdriver |Screw Pitch gauges and Screw Extractors

Ratchet Tap Wrench
T-Type : 85mm | M3 - M8

Ratchet Tap Wrench
Sizes : M5 - M10
105mm Long

300mm Ratchet Tap Wrench M5 - M12

Adjustable Tap Chuck Socket
1/4in.Dr | M3 - M8
This interchangeable tap chuck adaptor can be used with
any 1/4in.drive manual wrench or ratchet.
The jaw can be easily adjusted using only one tapping adaptor,
making it suitable for tap sizes ranging from M3 to M8

Adjustable Tap Chuck Socket
1/4in.Dr | M5 - M12
This interchangeable tap chuck adaptor can be used with
any 1/4in.drive manual wrench or ratchet.
The jaw can be easily adjusted using only one tapping adaptor,
making it suitable for tap sizes ranging from M5 to M12

Adjustable Tap Chuck Socket
3/8in.Dr | M5 - M12
This interchangeable tap chuck adaptor can be used with
any 1/4in.drive manual wrench or ratchet.
The jaw can be easily adjusted using only one tapping adaptor,
making it suitable for tap sizes ranging from M5 to M12

Adjustable Tap Chuck Socket
1/2in.Dr | M13 - M192
This interchangeable tap chuck adaptor can be used with
any 1/4in.drive manual wrench or ratchet.
The jaw can be easily adjusted using only one tapping adaptor,
making it suitable for tap sizes ranging from M13 to M19

2pc Adjustable Tap Socket Set - 3/8in.Dr
For use with Taps / Reamers / Screw Extractors
and other tools with a square shank.
Fits all common taps from 0 to 1/2in. / 3mm to 12mm.
Makes tapping and threading easier in tight workspaces.

5pc Bi-Directional Ratchet Tap & Die Holder Set
Long Handled 72-tooth Reversible Ratchet
Die Holder suitable for dies M3 - M12.
Tap Holder.
3mm Hex Key.
T-Bar.

10pc Tap Holder Socket Set
with 1/4in.Dr and 3/8in.Dr / Magnetic Sockets
1/4in.Dr Sizes : 2.8 | 3.4 | 4 | 4.5 | 4.6 | 5.4mm / Depth : 32mm
3/8in.Dr Sizes : 6.4 | 7 | 7.3 | 8.4mm / Depth : 40mm
For driving thread cutting taps from M1.5 to M14.
Sockets have a square recess and magnets to hold tap shanks.
For use with 1/4in.Dr and 3/8in.Dr ratchets
ideal for restricted access where T-handle tap holders will not reach.

9pc Tap Extractor Set
Utilises the flutes of a broken tap to safety remove it.
Sizes : M5 | M6 | M8 | M10 | M12 | M14 | M16 | M18-M20 | M22.
With 3 and 4 flute design.

25pc Thread Repair Set
Sizes : M5 x 0.8 x 6.7mm
With Break Pin Tool / Twist Drill and Tap
Ideal for restoring damaged threads

25pc Thread Repair Set
Sizes : M6 x 1.0 x 8.0mm
With Break Pin Tool / Twist Drill and Tap
Ideal for restoring damaged threads

25pc Thread Repair Set
Sizes : M8 x 1.25 x 10.8mm
With Break Pin Tool / Twist Drill and Tap
Ideal for restoring damaged threads

15pc Thread Repair Set
Sizes : M10 x 1.0 x 13.5mm
With Break Pin Tool / Twist Drill and Tap
Ideal for restoring damaged threads

15pc Thread Repair Set
Sizes : M10 x 1.25 x 13.5mm
With Break Pin Tool / Twist Drill and Tap
Ideal for restoring damaged threads

15pc Thread Repair Set
Sizes : M10 x 1.5 x 13.5mm
With Break Pin Tool / Twist Drill and Tap
Ideal for restoring damaged threads

15pc Thread Repair Set
Sizes : M12 x 1.25 x 16.3.mm
With Break Pin Tool / Twist Drill and Tap
Ideal for restoring damaged threads

15pc Thread Repair Set
Sizes : M12 x 1.5 x 16.3.mm
With Break Pin Tool / Twist Drill and Tap
Ideal for restoring damaged threads

15pc Thread Repair Set
Sizes : M12 x 1.75 x 16.3.mm
With Break Pin Tool / Twist Drill and Tap
Ideal for restoring damaged threads

15pc Thread Repair Set
Sizes : M14 x 1.25 x 12.4mm
With Break Pin Tool / Twist Drill and Tap
Ideal for restoring damaged threads

15pc Thread Repair Set
Sizes : M14 x 1.5 x 12.5mm
With Break Pin Tool / Twist Drill and Tap
Ideal for restoring damaged threads

88pc Thread Repair Set
Sizes : M6 x 1.0 x 8.0mm
M8 x 1.25 x 10.8mm
M10 x 1.25 x 13.5mm
Ideal for restoring damaged threads
suitable for engine repair and other automotive applications

131pc Thread Repair kit
Wire Thread Inserts : M5 | M6 | M8 | M10 | M12
5 Installation Tools 5 Break Pin Tools 5 Twist Drills 5 Taps 1 Hex Key

25 Thread Inserts
Helicoil Type : M5 x 0.8mm

25 Thread Inserts
Helicoil Type : M6 x 1.0mm

25 Thread Inserts
Helicoil Type : M8 x 1.25mm

25 Thread Inserts
Helicoil Type : M10 x 1.5mm

10 Thread Inserts
Helicoil Type : M12 x 1.75mm

20mm Die Holder
3/8in.Square Drive with 21mm Hex.
Suitable for M3 - M6 Dies.
For use with a 3/8in.Drive Extension / T-handle or Ratchet etc.
Also can be used with a 21mm spanner.

25mm Die Holder
3/8in.Square Drive with 21mm Hex.
Suitable for M3 - M12 Dies.
For use with a 3/8in.Drive Extension / T-handle or Ratchet etc.
Also can be used with a 21mm spanner.

38mm Die Holder
1/2in.Square Drive with 27mm Hex.
Suitable for M12 - M15 Dies.
For use with a 1/2in.Drive Extension / T-handle or Ratchet etc.
Also can be used with a 27mm spanner

50mm Die Holder
1/2in.Square Drive with 27mm Hex.
Suitable for M16 - M20 Dies.
For use with a 1/2in.Drive Extension / T-handle or Ratchet etc.
Also can be used with a 27mm spanner

8pc Axle Spindle Rethreading Set
13/16 x 20UNEF
3/4 x 20UNEF
M20 x 1.25 | M20 x 1.50
M22 x 1.00 | M22 x 1.50
M24 x 1.50 | M24 x 2.00
Use with 32mm socket or wrench.
Thread restoring die set to
clean or repair axle threads on spindles.

9pc Axle Spindle Rethreading Set
For cleaning or repairing spindle threads,
axle studs and wheel stud threads.
Contents :
8 Dies : M20 x 1.25 | M20 x 1.50 | M22 x 1.00
M22 x 1.50 | M24 x 1.50 | M24 x 2.00
13/16in. x 20 UNEF | 3/4in. x 20 UNEF
with 1/2in.Dr extension Bar

Wheel Nut / Stud Thread Checker
Identifies Imperial and Metric wheel nut threads easily.
Metric : M12 x 1.25 | M12 x 1.50 | M12 x 1.75 | M14 x 1.50 | M14 x 2.00
SAE : 7/16 x 20 | 1/2 x 20 | 9/16in. x 18
Manufactured from Aluminium.

Wheel Stud Thread Repair Set
This set restores damaged wheel nut threads.
Adaptor Hex size - 24mm
M12 x 1.25mm / M12 x 1.5mm / M14 x 1.5mm
3 dies for the most common wheel stud thread sizes

Wheel Stud Thread Repair Set
For Cleaning or Restoring damaged wheel nut threads.
Socket / Adaptor Hex size : 32mm
Die Sizes : M18 x 1.5mm | M20 x 1.5mm | M22 x 1.5mm | 7/8 x 11BSF

13pc Tap and Die Set
For re-threading wheel studs / nuts and bolts.
Special holders allow for use with built-in wheel studs
Tap / Die Sizes : M12 x 1.25 | M12 x 1.50 | M14 x 1.50
with Tap Holders / Die Stocks / L-type Hex wrench and Thread gauge
0.5 | 0.6 | 0.7 | 0.75 | 0.8 | 0.9 | 1.0 | 1.25 | 1.5 | 1.75 | NPT27 | BSP28

9pc Wheel Stud Cleaning Set
Brushes fit most wheel studs.
Metric : 12 |13 | 14 | 16 | 22 | 28mm
Imperial : 7/16 | 1/2 | 9/16 | 5/8 | 7/8 | 1-1/8in.
Quick change brush adaptor with -
1/4 Hex to 1/2in.Dr. | SDS to 1/2in.Dr.

9pc Threading Die Adapter Set
Can be used for all threading dies from M3 - M14.
allows straightforward cutting of outer threads.
Use with a ratchet wrench to access difficult areas.
Ideal for cylinder stud bolts etc.
Die Holders:20 x 5 | 25 x 9 | 30 x 11 | 38 x 14mm.
Extensions : 63mm and 98mm
Hexagon Adapter.

Re-thread kit - 42pc UNC / UNF | Metric
Sizes - 1/4 to 5/8 UNC / UNF
Sizes - 6 x 1.00 to 12 x 1.75 Metric
Thread File - 11 | 12 | 13 | 14 | 15 | 16 | 18 | 20 and 24
Thread File - 9 | 10 | 12 | 16 | 20 | 27 | 28 and 32

220mm Double Ended File
With reversible vinyl grip.
Metric : 0.75 | 1 | 1.25 | 1-5 | 1.75 | 2 | 2.5 | 3mm Pitch
Files both right and left hand threads.

Universal Outside Thread Chaser 5 - 130mm Diameter
For use on axle tubes / thrust rods / steering rods etc.
Quickly restores threads without the need for cutting.
Can be attached to any undamaged thread position
and re-grooves the thread from this position.
Re-grooving inserts / right and left hand threads :
Metric thread pitches : 1.0 - 3.5mm
Imperial thread pitches : 4 - 24

Portable Pipe Threader
Range : 1/2in. - 1-1/4in.
Voltage : 220V / 50Hz
Input : 1700W / Output : 1020W
Speed : 25rpm
Die Stocks : 1/2 | 3/4 | 1 | 1-1/4in.
Suitable for threading various water / electric or gas pipes.
High-performance power threading without the use of a vice.
Universal type.

Portable Pipe Threader
Range : 1/2in. - 2in.
Voltage : 220V / 50Hz
Input : 1700W / Output : 1020W
Speed : 30rpm for threading and 55rpm reverse.
Die Stocks : 1 /2 | 3/4 | 1 | 1 -1 /4 | 1 -1 /2 | 2in.
Suitable for threading various water / electric or gas pipes.
High-performance power threading without the use of a vice.
Universal type.

Tripod Chain Vice Pipe Stand
For increased convenience handling pipes and fittings
when using sealants or soldering and any other job-related materials.
Ideal when working with larger pipes and handling other bulkier materials
Capacity : 1/2 - 6in. / 12.5 - 150mm.