33pc Glow Plug Thread Repair Kit
Taps : M8 | M10 | M10 | M12 | M12 | M14
Insert Drivers : M8 | M10 | M10 | M12
Tap Guide Pins : 8 x 45 | 10 x 45 | 12 x 45
Thread Inserts : M8 | M10 | M10 | M12
Insert Guide Rod and Knurled Head
For damaged cylinder head glow plug threads.

Thread Repair Kit for Glow Plugs - M8 x 1.0
Taps and coil inserts for repairing M8 glow plug threads.
5 x 12mm Deep Inserts
with black phosphate finish.

Thread Repair Kit for Glow Plugs - M10 x 1.0
Taps and coil inserts for repairing M10 glow plug threads.
5 12mm Deep Inserts
5 19mm Deep Inserts
with black phosphate finish.

Thread Repair Kit for Glow Plugs - M12 x 1.25
Taps and coil inserts for repairing M12 glow plug threads.
5 x 12mm Deep Inserts
5 x 19mm Deep Inserts
5 x 26mm Deep Inserts
with black phosphate finish

M8 x 1.0 / 115mm Internal Spark Plug Rethread Tool
For cleaning and re-cutting Spark Plug and Glow Plug Threads
Simple handling due to eccentric function
Special length for deep seated thread
Quick and low-cost thread repair
Centring shaft
With conical mounting shaft for thread repair sleeves
External hexagon drive
With knurled knob

M10 x 1.0 / 115mm Internal Spark Plug Rethread Tool
For cleaning and re-cutting Spark Plug and Glow Plug Threads
Simple handling due to eccentric function
Special length for deep seated thread
Quick and low-cost thread repair
Centring shaft
With conical mounting shaft for thread repair sleeves
External hexagon drive
With knurled knob

M12 x 1.25 / 140mm Internal Spark Plug Rethread Tool
For cleaning and re-cutting Spark Plug and Glow Plug Threads
Simple handling due to eccentric function
Special length for deep seated thread
Quick and low-cost thread repair
Centring shaft
With conical mounting shaft for thread repair sleeves
External hexagon drive
With knurled knob

M12 x 1.25 / 270mm Internal Spark Plug Rethread Tool
For cleaning and re-cutting Spark Plug and Glow Plug Threads
Simple handling due to eccentric function
Special length for deep seated thread
Quick and low-cost thread repair
Centring shaft
With conical mounting shaft for thread repair sleeves
External hexagon drive
With knurled knob

M14 x 1.25 / 140mm Internal Spark Plug Rethread Tool
For cleaning and re-cutting Spark Plug and Glow Plug Threads
Simple handling due to eccentric function
Special length for deep seated thread
Quick and low-cost thread repair
Centring shaft
With conical mounting shaft for thread repair sleeves
External hexagon drive
With knurled knob

M14 x 1.25 / 270mm Internal Spark Plug Rethread Tool
For cleaning and re-cutting Spark Plug and Glow Plug Threads
Simple handling due to eccentric function
Special length for deep seated thread
Quick and low-cost thread repair
Centring shaft
With conical mounting shaft for thread repair sleeves
External hexagon drive
With knurled knob

M18 x 1.5 / 90mm Internal Spark Plug Rethread Tool
For cleaning and re-cutting Spark Plug and Glow Plug Threads
Simple handling due to eccentric function
Special length for deep seated thread
Quick and low-cost thread repair
Centring shaft
With conical mounting shaft for thread repair sleeves
External hexagon drive
With knurled knob

2pc Internal Spark Plug Rethread Tool Set
270mm Internal thread restorers
Sizes : 12mm and 14mm.
Ideal for deep seated spark plugs.

7pc Internal Spark Plug Rethread Tool Set
For cleaning and re-cutting spark plug or glow plug threads br> Simple handling due to eccentric function br> Special length for deep seated threads
Centring shaft
With conical mounting shaft for thread repair sleeves
Sizes : M8 | M10 | M12 | M14 | M18

2pc Thread Chaser Set for Spark Plugs
Sizes : M10 x 1.0 | M12 x 1.25 | 14 x 1.25 | M18 x 1.5
for Cleaning and Re-Threading damaged ports

10mm Spark Plug Re-Thread Set
Cleans and Re-threads Spark Plug Ports
Includes Tap and 4 Inserts : 3/8 | 7/16 | 1/2 | 3/4in.

14mm Spark Plug Re-Thread Set
Cleans and Rethreads Spark Plug Ports
Includes Tap and 4 Inserts - 3/8. 7/16. 1/2. 3/4in.

Spark Plug Thread Repair Set - M8 x 1.0
For professional repair of spark plug threads.
M8 HSS Steel Tap with 16mm hex drive
Thread inserts : 9.5 | 11.1 | 12.7 | 19.1mm

Spark Plug Thread Repair Set - M12 x 1.25
For professional repair of spark plug threads.
M12 HSS Steel Tap with 16mm hex drive
Thread inserts : 9.5 | 11.1 | 12.7 | 19.1mm

25pc Spark Plug Thread Repair Kit
Comprehensive and time saving kit for spark plug thread repair.
Especially suitable for the repair of deep-seated plug configurations.
With taper and plug taps together with integrated reamer.
Includes plug coil inserts.

10pc Injector Clamping Bolt Thread Repair Set for Mercedes-Benz
Suitable for reaming the broken-off expansion bolt
and repairing the M6 thread in the cylinder head.
No need to remove the cylinder head or valve covers.
Drill : 6mm and Step Drill : 7 to 8 mm with adjustable depth ring.
Guide Sleeve for 6 mm twist drill
Tap : M8 x 1.0mm and Assembly tool for threaded inserts
5 threaded inserts : M6 x 1 inner thread / M8 x 1 outer thread.

7pc Oil Pan Thread Repair Set
with M13 Tap
6 Oil Drain Plugs with washers
Suitable for Cars / Motorbikes / Trucks and Vans

7pc Oil Pan Thread Repair Set
with M15 Tap
6 Oil Drain Plugs with washers
Suitable for Cars / Motorbikes / Trucks and Vans

7pc Oil Pan Thread Repair Set
with M17 Tap
6 Oil Drain Plugs with washers
Suitable for Cars / Motorbikes / Trucks and Vans

7pc Oil Pan Thread Repair Set
with M20 Tap
6 Oil Drain Plugs with washers
Suitable for Cars / Motorbikes / Trucks and Vans

24pc Oil Pan Thread Repair Set
Taps - M13. M15. M17. M20
Oil Drain Plugs may need to be replaced because of stripped threads
Suitable for Cars / Motorbikes / Trucks and Vans

114pc Oil Pan Thread Repair Set
Ideal for repairing sump / gearbox and differential drain plug threads.
Used to tap the damaged thread slightly over size
then fit a new drain plug and washer supplied.
Suitable for most cars and light commercial vehicles.
Tap Sizes - M13 x 1.25 to M22 x 1.5mm

8pc Brake Caliper Bleed Nipple Repair Kit
Suitable for repairing Brake Caliper Bleed Nipples : M5 to M8.
Contents :
Drill : 8.5mm
Tap : 1/8in. - BSP28
6 Bleed Nipple Inserts : 1/8in.- BSP28 x 30mm

8pc Brake Caliper Bleed Nipple Repair Kit
Suitable for repairing Brake Caliper Bleed Nipples : M8 to M10.
Contents :
Drill : 10mm
Tap : M11.5 x 1.0mm
6 Bleed Nipple Inserts : M11.5 x 36mm

12pc Brake Caliper Guide Bolt Thread Repair Set
Used for repairing faulty inner threads on
brake Caliper guide bolts in wheel bearing
housing brake Caliper carriers with NO
need to remove the wheel bearings or struts.
For use on most Ford -
Vauxhall / Opel - Vauxhall | Opel and
VAG - Audi | Seat | Skoda | VW vehicles.

15pc Brake Caliper Thread Repair Set
For rethreading brake Caliper bolt holes.
With Step drill to increase hole sizes.
M12 x 1.5mm tap step drill insert locator.
Washers with centre roller bearing.
10 replacement inserts.

16pc Brake Calliper Thread Repair Set
with 10 replacement threads.
Step Drill | M9 x 1.25 Tap | 7mm Hex Key
Drilling Gauges : Ford 105mm | Opel 94mm | VAG 91mm
For replacing damaged brake caliper threads
with a new threaded insert.

5pc ABS Sensor Reamer Set - 1/4in.Dr
1/4in.Dr. / 125mm long T-Bar Handle.
4 popular sized reamers for removing dirt / dust and rust.
Sizes : 14 x 32mm | 15 x 23mm | 18 x 23mm | 18 x 34mm.
Applicable to most makes and models of vehicles.
BMW / Fiat Group / Ford / Mercedes / PSA / VAG.

4pc Wheel Budd Internal Thread Restoring Kit
For Use on Vehicles that use Budd Wheel Nuts
M12 x 1.25 for PSA
M12 x 1.5 for BMW
M12 x 1.5 for Mercedes
M12 x 1.75 for Volvo
M14 x 1.5 for VAG Vehicles

7pc Combined Drill and Tap Set
with 1/4in. Hex Shank
7pc Combined HSS-G Drill and Tap Cutting Set
6 Combination Drill and Taps with 1/4in. Shanks.
M3 x 0.5 | M4 x 0.7 | M5 x 0.8 | M6 x 1.0 | M8 x 1.25 | M10 x 1.5
For Drilling / De-burring and Threading.
With 1/4in. Hex Magnetic Bit Holder.
HSS 6542.

6pc Die Set
Die Wrench
Dies : M6 | M7 | M8 | M10 | M12

2pc Tap Set
Size : M12 x 1.25p

2pc Tap Set
Size : M14 x 1.25p

6pc Tap Set
Quick Coupler
Taps : M6 | M7 | M8 | M10 | M12

14pc Tap and Die Set
Taps : M6 x 1.0 | M8 x 1.25 | M10 x 1.5 | M12 x 1.75
Hex Dies : M6 x 1.0 | M8 x 1.25 | M10 x 1.5 | M12 x 1.75
Drill Bits : 5.0 | 6.8 | 8.5 | 10.8mm
2-in-1 Hex Die and Tap Wrench Holder
Tap Adaptor.

10pc Tap Set
Tap Wrench
Taps : M2.5 | M3 | M4 | M5 | M6 | M7 | M8 | M10 | M12

20pc Tap and Die Set
Tap and Die Sizes : M3 x 0.4 to M12 x 1.75mm
Tap and Die 1/8in. NPT
Bar Type Tap Wrench and Die Holder

40pc Tap and Die Set
Tap and Dies in the following sizes :
M3 x 0.5 | M3 x 0.6 | M4 x 0.7 | M4 x 0.75 | M5 x 0.8 | M5 x 0.9
M6 x 0.75 | M6 x 1.0 | M7 x 0.75 | M7 x 1.0 | M8 x 1.0 | M8 x 1.25
M10 x 1.25 | M10 x 1.5 | M12 x 1.5 | M12 x 1.75 | 1/8in. x 27NPT
Die Wrench | Tap Wrench : M3-12 | T-Type Wrench
Screwdriver and Pitch Gauge

45pc Tap and Die Set
3 - 25mm Tap Wrenches
50mm Die Stock
Taps and Dies - M6 x 0.75. to 24 x 3.0
11/2in. O/D | 2in. O/D

32pc HSS Tap and Die Set
Sizes : M3 to M12
Tap Wrench : M3-12.
Die Wrench : 25mm 0/D
Screwdriver and Screw Pitch Gauge

111pc Tap and Die Set
70 - Taper and Plug Taps : M2 x 0.4 to M18 x 1.5.
35 - Hexagon Dies : M2 x 0.4 to M18 x 1.5.
2 in 1 Tap Holders / Small / Big.
2 in 1 Hex Die Holders - 1in. / 1-7/16in.
Hex keys

115pc Tap and Die Set
48 Tap and Dies in the following sizes
4-40 to 12-24 | 1/4 -20 to 3/4 -16 | 0.4 to 18 x 2.5
1/8NPT27 | 1/8BSP28 | 1/4NPT18 | 1/4BSP19
Tap and Die handles | T Type Wrench
Centre punch and Drills - 2.5 | 3.3 | 4.2 | 5 | 6.8
Screwdriver |Screw Pitch gauges and Screw Extractors

Ratchet Tap Wrench
T-Type : 85mm | M3 - M8

Ratchet Tap Wrench
Sizes : M5 - M10
105mm Long

300mm Ratchet Tap Wrench M5 - M12

Adjustable Tap Chuck Socket
1/4in.Dr | M3 - M8
This interchangeable tap chuck adaptor can be used with
any 1/4in.drive manual wrench or ratchet.
The jaw can be easily adjusted using only one tapping adaptor,
making it suitable for tap sizes ranging from M3 to M8