Universal Puller Hook
with M20 x 1.5mm connection thread
Universal car bodywork pull hooks,
ideally for all ring eyelet tools
High quality and compensated alloy steel

Double Puller Hook
with M20 x 1.5mm connection thread.
Ideally designed for rapid removal of rims with ventilation holes,
especially when wheels are frequently seized to
the hub due to environmental factors.
High quality and compensated alloy steel.

Large Wheel Arch Hook
305mm Wheel Arch Puller
Pull Capacity : 1.5 tonne
Ideal for removing slight dents and creases in wheel arches.
Simply hook under lip of wheel arch for pulls
without bulging or misshaping the panel.
2 pulling faces offer choice of curvature to fit most cars.
Also useful for radiator supports, rear light openings
or any lightweight panel pulling tasks.

Fender Roller
Wheel Arch Reformer and Flaring tool
Increases the clearance between wheel and fender
Use to flare the fenders for wider wheels
Repair wheel arch collision damage.
Rotates from the wheel hub centre.
Universal fitting

Bench Mounted Metal Bender
Manually operated - bench mounted metal bender.
Capable of producing radii corners and angled bends
in strips up to 50mm wide and radii bends in round /
square stock up to 16mm diameter.
8 Round Dies : 1 | 1-1/4 | 1-1/2 | 1-1/2 | 1-3/4 | 2 | 2-1/2 | 3in.
Telescopic handle extends to 44in.
Capacity : 3/16 x 1-1/4 or 1/4 x 2in. mild steel
5/8in. round or square solid.

Floor Mounted Metal Bender
Manually operated - bench mounted metal bender.
Capable of producing radii corners and angled bends
in strips up to 50mm wide and radii bends in round /
square stock up to 16mm diameter.
8 Round Dies : 1 | 1-1/4 | 1-1/2 | 1-1/2 | 1-3/4 | 2 | 2-1/2 | 3in.
Telescopic handle extends to 44in.
Capacity : 3/16 x 1-1/4 or 1/4 x 2in. mild steel
5/8in. round or square solid.

52in. Car Panel Bumper Alignment Repair Tool
Heavy duty 32mm diameter tubing with
Heavy Duty Chain and 2 Steel Claw Hooks.
Tube Length : 1.33M approx.
Chain Length : 2.04M approx.
An alignment bar designed for Bumpers /
Hoods / Decks / Panels / Brackets and Doors.
Ideal for auto body shops to help shape damaged bodywork.

Pneumatic Dent Puller Kit
Air activated suction pad keeps firm hold of panel
while slide hammer is used to ease out dents and
depressions without damage to the paint surface.
Pneumatic regulation via ball valve.
Suction Cups : 75mm | 100mm | 125mm plus hook.
Working pressure : 70 - 110psi
Air inlet : 1/4in.
Suitable for repairing dents on various flat surfaces.

10 Ton Hydraulic Body Repair Kit
Load Capacity : 10 ton
Max Lifting Height : 135mm
Cylinder Min Height : 355mm
Kit contains heavy duty hydraulic equipment you need
for lifting / pushing / bending / straightening and spreading.
Contents : Pump | Handle | Ram | Spreader | Extension Bar
90 degree V Base | Flat Base | Male Connector | Flange Base
Flange Head | Cap Head | Rubber Head | Wedge Head.

Portable Hydraulic Repair Tool Kit
16mm | Min Height - 42mm
58mm | Min Height - 132mm
73mm | Min Height - 140mm
120mm | Min Height - 570mm
125mm | Min Height - 280mm
130mm | Min Height - 670mm
140mm | Min Height - 363mm

10 Ton Hydraulic Shop Press
Heavy Duty H-frame 10 tonne hydraulic shop press with sliding ram.
Adjustable crosspiece - 3 positions : 95 / 180 / 265mm
Capacity : 10 tonne
Work Range : 0- 340mm
Ram Stroke : 135mm
Ideal for Straightening / Bending and Stamping
With safety valve to protect the press from overloading.
Complete with two flat V-shaped blocks.

20 Ton Hydraulic Shop Press
Floor Standing Heavy Duty H-Frame
Stroke : 160mm
Work Range : 0 - 998mm
G.W. : 104kgs
N.W. : 102kgs
Package Size : 1630 x 190 x 320mm
Ideal for Straightening / Bending and Stamping

30 Ton Hydraulic Shop Press
Floor Standing Heavy Duty H-Frame
Ideal for Straightening / Bending and Stamping

50 Ton Hydraulic Shop Press
Floor Standing Heavy Duty H-Frame Construction
Capacity : 50 Tons
Working Range : 0 - 1000mm
Ram Stroke : 185mm
Air Pressure : 110 - 120psi
Air Inlet : 1/4in. NPT
Ideal for straightening / Bending and Stamping.

Universal Hydraulic Press Support Block
For use with a workshop press
Guarantees a perfect and safe support
Length: 2750mm
Width: 210mm

6pc Hydraulic Press Accessory Kit
For use with up to 50 Ton press
Constructed from high quality material to ensure long lasting durable performance.
Kit Includes :
3 x Punches : 1/2 | 1 | 1-7/8in.
2 x Steel press plates : 14 x 3 x1in.
1 x Bearing shield
Can be used in a variety of press applications.

5kg Anvil suitable for worktop mounting

10kg Anvil

20kg Anvil

50kg Anvil

100kg Anvil

Portable Work Stand
Folding Windscreen or Panel Stand with 500lb capacity.
Useful for supporting panels / doors / fenders / hoods and bumpers.
Adjustable height by using securing chains on legs.
Steel tubing with foam cover to prevent damage.
Fold away when not in use.
Adjustable height : 24 - 40in.
Tubing diameter : 28mm