DIY Alloy Wheel Repair kit
for Quick Repair of curb damage / scratches / slight dents / sanding marks etc.
For use on alloy wheels / synthetic wheels / steel rims and hubcaps.
Kit includes everything you need to fix scuffs and scratches in short time.
With Repair adhesive / Sliver paint / Gloves / Cleaners
Sanding file / Spatula / Cotton swab / Hairbrush

DIY Vehicle Headlight Restoration Kit
For restoring clear plastic by removing haze and discoloration.
Easy 3-step process requires as little as an hour to remove scratches
and restore cloudy dull lenses to gleaming clear headLights.
With - Backing Pad and Adapter
Sanding and Polishing Discs
Sponge and Polish Paste
3ml UV Protection Liquid sachets
Masking Tape.

DIY Leather and Vinyl Repair Kit
Ideal for repairing any small holes / rips and imperfections.
Useful for automotive upholstery / furniture and leather clothing.
With a variety of colours and grain papers to match different materials.
Colour matching guide for the correct match to the damaged surface.
With Colour Paint/ leather glue / Heat transfer tool and Grain Paper.
Fabric Cloth / Test Leather / Mixing Cup and Spatula.

DIY Rear Window Defogger Repair Kit
For repairing scratched or broken rear window defogger grid lines.
Surfaces to be adhered must be smooth and flat.
Repairs can be made ideally at temperatures from 50 D/F to 75 D/F / 10 D/C to 24 D/C.
Glue is specially formulated to conduct electricity.
With 2.0ml Silver repair compound / Masking tape / Clean cloth
Cotton swabs / Alcohol Pre-pad / Plastic scraper

Vehicle Bonnet and Boot Strut Clamp
For locking the bonnet or tailgate gas struts when failed.
Jaw width : 10mm

Vehicle Bonnet or Tailgate Telescopic Support
Ideal for the workshop or at breakdowns where the vehicle bonnet
or boot supports have failed or are to be removed for service.
3 Section telescopic light weight aluminium tube with tough rubber pads.
Lock in any position with a simple twist.
Adjustable from : 540 to 1200mm.

Short Adjustable Rear Hatch Support
For keeping the lift gate or hatch partially open for sanding,
painting, buffing, or fully open for convenient lift strut replacement
or working inside the cargo area without risk of the hatch falling.
The hatch door can be easily positioned by connecting the metal J hook
to the striker and securing the larger loop end of the extender bar to the latch.
This allows for a work angle adjustment of the hatch door
from 440mm to a full extension of 600mm.

Long Adjustable Rear Hatch Support
For keeping the lift gate or hatch partially open for sanding,
painting, buffing, or fully open for convenient lift strut replacement
or working inside the cargo area without risk of the hatch falling.
The hatch door can be easily positioned by connecting the metal J hook
to the striker and securing the larger loop end of the extender bar to the latch.
This allows for a work angle adjustment of the hatch door
from 970mm to the full extension of 1550mm.

4pc Body Filler Applicator Set
Flexible Steel Blades
Sizes : 2 | 3 | 4 | 6in. / 50 | 75 | 100 | 150mm
with Rubber Grips

Plastic Filler Scoop
for Automotive body repair use
and other spreading applications

3pc Plastic Putty Knife Set
Blades : 38 | 74 | 152mm Wide
Also useful as spreaders
Lightweight and Durable

3pc Plastic Spreader Set
Blades : 100 | 130 | 160mm Wide
Useful for many filler applications and putty spreading jobs
Easy Clean

Yellow Dent Reflector Line Board
Board Size : 200 x 240mm
350mm articulated arm with 70mm suction cup

White Dent Reflector Line Board
Board Size : 200 x 240mm
350mm articulated arm with 70mm suction cup

LED Light Dent Repair Line Board
Reflection of LED lines reveal even the smallest dents.
Adjustable arm lever and strong suction cup base.
Size : 270 x 150mm
Flexible Arm : 370mm length
Power Supply : DC 5V
3m USB Cable included.
Easy-to-use lamp.
USB output : DC 5V /1 Amp

LED Light Line Board
Quickly and accurately find where a dent is located.
Three light sources can be independently turned on and off,
offering moderate brightness options.
Adjustable arm lever and strong suction cup base.
Board Size :360 x 180mm
Flexible Arm : 320mm length
Power supply : DC 5V
5m USB Cable included.
USB Output : DC 5V /1 Amp

800mm Dent Mirror
Ideal for better identification of dents and bumps,
e.g. hail damage, stone-chipping or small parking damages.
Asymmetric lines for precise detection of minor deformations.
Suitable for mobile use, folds in seconds
With plastic handle and storage pouch.

Shrinking Hammer - 628G
Ideal for Bodyshop use

7pc Panel Beating Kit
or Auto Body Repair Set
Hammers : Bumping | Pick and Finish | Reverse Curve
Dollies : Curved | Double End | Shrinking | Utility

7pc Panel Beating Kit
Auto Body Repair Set
Bumping | Pick and Finish Hammer
Reverse Curve Hammer
Utility | Double End Dolly
Shrinking and Curve Dolly

9pc Panel Beating Kit / Auto Body Repair Set
Drop-forged Steel Dollies and Spoons.
4 Hammers : Bumping | Skinning | Pein & Pick / Finish
with Professional Hickory Handles.
3 Dollies : Toe | Universal | Heel.
2 Spoons : Dinging | Surfacing.
Use on flat and curved surfaces.
Hammer Heads and Dollies made from 1055 medium carbon steel
Natural Hickory Wood Shafts

7pc Rubber Dolly Set
Made from POM material which is rigid and non marking
ideal for use on aluminium panels.
Long Type Curved Dolly
Curved Dolly
Utility Dolly
Heel dolly
Long Type Heel Dolly
Double End Dolly
D

Metal Forming Kit with Interchangeable Heads
For use on 18 - 20 gauge Steel
and 16 - 18 gauge Aluminium or Brass.
Fits any standard 0.401 Parker Taper Air Hammer.
Vinyl impact absorbing grip -
provides a greater measure of control.
Quick-change design for efficient forming head changes.
Allows for fast or rough shaping of metal panels.

Dent Repair Kit
Complete kit to repair minor dents in bodywork
Save time and money in simple easy steps
The kit Includes
Hot melt glue gun
Glue sticks
Glue scraper
Pulling bridge
Dent pulling tabs with wing nut
Knockdown and Release agent

6pc Dent Puller Pad Set
Replacement puller pads
for dent repair kit CT3789
3 x 35mm Round pads
3 x 16 x 32mm Oval pads

Dent Removal Tool Kit
Suitable for repair of minor dents with
Slide Hammer to pull out hard dents
Dent Lifter for slight dents on flat surface
Baby face mini lifter or normal mini lifter
Scraper for gentle removal of dent pads
Glue Gun - 230V / 40W / 50Hz
8 Black glue sticks - 11 x 200mm
Glue Tabs in various sizes and shapes

Slide Hammer / Dent Puller Set
Slide Hammer - 10lb
With steel hooks pullers and attachments

9pc 5lb Dent Puller Slide Hammer Set
Ideal tool kit for DIY auto-body repairs.
Finger grip handle for sure grip with -
Metal pulling screw
Puller Hooks
L-shaped Puller
Steel Nose Cones
Piercing Punch
Plate Edge Puller

1.4kg Dent Puller Slide Hammer
with air powered suction cups : 60 | 120 | 150mm
Easily remove dents with the 1400g slide hammer.
1/4 BSP fitting with 330mm hose.
Air consumption : 113 L/min
Length: approx. : 620mm
Working pressure: 6.3 to 10.3 bar / 90 to 150psi

8pc Dent Removal Tool Set
Ideal for removing small dents
and minor accident damage.
Half-round bars - 21 and 22 cm
Round bar - 42 cm
Half-round pointed bar - 60 cm
Angled ball-headed bars - 46 and 100 cm
Pointed bar - 56 cm
Special-type hooked bar - 107 cm

Big Mouth Clamp
Self-tightening serrated jaws for a positive grip
Single-way pull operation.
Bolt Size : 14 x 120mm
Capacity : 3 Ton
No twisting by safety device.

Box Clamp / Two-Way
Capacity : 3 Ton / Straight way | 1 Ton / Cross way
Two-way pull operation.
Both sides of the jaws are unique in order to fit into the confined space
Bolt Size : 14mm x 120mm
Self-tightening serrated jaws for a positive grip.
For car body repairs.

Double Grab Hook Set
Chain pulling clamp
Suitable for 3/8in. / 10mm chain - grade G70.
Forged heat treated steel.
For using as chain reducer or chain connector.
For car body repairs.

Frame Rack Clamp
Capacity : 5 Ton
Single-way pull operation.
Self-tightening serrated jaws for a positive grip
For more sheet metal applications.
Bolt size : 14 x 70mm
For car body repairs.

Frame Rack Clamp
Capacity :
1 Ton / Transverse Load | 5 Ton / Longitudinal Load | 1 Ton / Cross Load.
For more sheet metal applications.
Bolt Size : 14mm x 70mm | 12mm x 60mm
For car body repairs.

Frame Rack Clamp / Two-Way
Capacity : 5 Ton / Straight way | 1 Ton / Cross way
Two-way pull operation.
Self-tightening serrated jaws for a positive grip.
Bolt Size : 14 x 70mm
For car body repairs.

G-Type Clamp
Self-Tightening Auto Body Repair Tool
Capacity : 3 Ton / Straight way | 1 Ton / Cross way.
Two-way pull operation.
Bolt Size : 20 x 135mm
For car body repairs.

Heavy Duty Clamp
Capacity : 5 Ton
Single-way pull operation.
Unique design for operators requiring strong pulling power.
Bolt Size : 20 x 130mm
For car body repairs.

Long Nose Clamp
Capacity : 3 Ton
Single-way pull operation.
No distorting due to the security device
Bolt Size : 16 x 80mm
For car body repairs.

Mini Clamp
Capacity : 3 Ton
Self-tightening serrated jaws for a positive grip
Single-way pull operation.
Bolt Size : 12 x 70mm
For car body repairs

Mini Clamp / Two-Way
Capacity : 3 Ton / Straight way | 1Ton / Cross way.
Two directions of pull.
Eyelet fixed on one side.
Bolt Size: 12 x 70mm
For car body repairs.

Scissor Clamp
Capacity : 2 Ton
Single way pull operation
Drop forged construction provides more pulling power
Perfect to use in confined spaces
Bolt Size : 14mm x 40mm
For car body repairs.

Shock Absorber Strut Puller Clamp
Capacity : 5 Ton / Straight way | 3 Ton / Cross way.
Easy, fast, reliable method for pulling strut towers.
Bolt Size : 16 x 110mm
For car body repairs.

Small Mouth Pull Clamp
Capacity : 5 Ton
Self-tightening serrated jaws for a positive grip
Single-way pull operation.
Bolt Size : 16 x 80mm
For car body repairs.

Small Mouth Pull Clamp / Two-Way
Capacity :5 Ton / Straight way | 1 Ton Cross way.
Two-way pull operation.
Self-tightening serrated jaws for a positive grip
Bolt Size : 16x 80mm
For car body repairs.

Pull Clamp
Capacity : 5 Ton
Opening : 0 - 20mm
Extremely versatile.
Integrated spring mechanism providing increased holding force
Bolt Size : 16 x 110mm
For car body repairs

5 Ton Ring Clamp
Single-way pull operation.
Claw width : 107mm
Opening : 0 - 20mm
For car body repairs
Extremely Versatile.

Small Wheel Arch Hook
155mm Wheel Arch Puller
Pull Capacity : 1.5 tonne
Ideal for removing slight dents and creases in wheel arches.
Simply hook under lip of wheel arch for pulls
without bulging or misshaping the panel.
2 pulling faces offer choice of curvature to fit most cars.
Also useful for radiator supports, rear light openings
or any lightweight panel pulling tasks.

Large Wheel Arch Hook
305mm Wheel Arch Puller
Pull Capacity : 1.5 tonne
Ideal for removing slight dents and creases in wheel arches.
Simply hook under lip of wheel arch for pulls
without bulging or misshaping the panel.
2 pulling faces offer choice of curvature to fit most cars.
Also useful for radiator supports, rear light openings
or any lightweight panel pulling tasks.

Fender Roller
Wheel Arch Reformer and Flaring tool
Increases the clearance between wheel and fender
Use to flare the fenders for wider wheels
Repair wheel arch collision damage.
Rotates from the wheel hub centre.
Universal fitting