1M / 4 Leg / 4 Ton Chain Sling
CE Approved

2M / 4 Leg / 4 Ton Chain Sling
CE Approved

2M / 2Ton Flat Webbing Sling
60mm Wide
Safety Factor : 7:1
Made from Polyester

2M / 3Ton Flat Webbing Sling
90mm Wide
Safety Factor : 7:1
Made from Polyester

5M / 2Ton Flat Webbing Sling
60mm Wide
Safety Factor : 7:1
Made from Polyester

5M / 3Ton Flat Webbing Sling
90mm Wide
Safety Factor : 7:1
Made from Polyester

Half Coupler with Lifting Eye
Width : 50mm
Tube Diameter : 38 - 52mm
Hoist Weight : 340kg
Fixings : M12 Eye Nut

230V Electric Hoist
Lifting Capacity : 125kg - 250kg
Lifting Height : 6 - 12M
Lifting Speed : 5 - 10M/min
Cable Length : 12.5M
Cable Diameter : 3mm
Cable Break Resistance : 800kg

2 Ton Hydraulic Engine Hoist / Fast folding

2000lb Folding Engine Stand
Heavy duty steel construction with wide base
and reinforced steel neck which provides ample strength
to eliminate flexing when supporting the engine block.
Rear swivel casters provide manoeuvrability
Rotating head provides easy access to any part of the engine.
N.W : 36kg

0.5 Ton Vertical Transmission Jack
Min. Height - 850mm
Max. Height - 1750mm
Rated Capacity 500kg
Weight- 60kg
Dimensions - 780 x 660 x 1000mm

1000kg Transmission Jack
Saddle Height : 830mm Min.
Saddle Height : 1750mm Max.
Its low profile enables easier positioning and the
adjustable mounting saddle assists when removing
the gearbox and realignment during replacement.
4 castors for extra manoeuvrability in confined spaces.
Fully adjustable saddle with forward and backward tilt.

1.0 Ton Transmission Jack
Min. Height 200mm
Max. Height 760mm

Strut Support Tool for Transmission Jacks
with 30mm diameter Top Shaft
Designed to hold and support suspension struts
when use with hydraulic vertical transmission jack
or gearbox stand, prevents the strut from moving downwards.
Used with jacks fitted with 30mm diameter top shaft.

Engine Support Beam
Load Capacity : 500kg
750 -1450 mm with 90cm long chains.
Hooks with threaded rods M20 x 2.5.
For the support of engines or gearboxes.
Strong square section tube.
Adjustable width.
Rubber pads protect vehicle while in use.

Engine Support Beam
with additional Sliding Cross Beam
Load Capacity : 500kg
750 -1450 mm with 90cm long chains.
Hooks with threaded rods M20 x 2.5.
For the support of engines or gearboxes.
Strong square section tube.
Adjustable width.
Rubber pads protect vehicle while in use.

Universal Engine Support Beam
Load capacity : 400kg
Height : 300mm
Total length : 1000mm
Total width : 510mm
Max. crossbeam supporting foot distance : 450mm
Secure support for engines or transmissions found on transverse engine vehicles.
Supports the engine / gearbox when removing the clutch or gearbox.
Adjustable and flexible to suit many applications.

Adjustable Under Vehicle Engine / Gearbox Support
Designed to support the engine or gearbox
when the mountings or gearbox are being removed.
Ideal when replacing clutches or timing belts.
Alternative to a transmission jack or engine support beam.
Suitable for most transverse and in-line configurations.
Load Capacity : 400kg
Minimum Length : 645mm
Maximum Length : 965mm
Width : 560mm

EV Battery Hydraulic Table Lift
Loading Capacity : 1000Kg
Lifting height range : 550 - 1750mm
Table Size : 1500 x 800mm
Directional Table Movement : 40mm plus or minus
Dual pump and double scissors for stable and durable lifting.
Large versatile platform adaptable for various battery modules.
Heavy-Duty Castors 2 fixed and 2 locking.
Controlled by large rear mounted foot pedal.
For assisting EV battery maintenance on electric vehicles.

Motorcycle Lift Table - Heavy Duty
Lifting Range 185 to 850mm
Max. :1000lbs / 450Kg
Hydraulic Operation using 1 Foot to Lift
Safety Valve to Prevent Overload
Set Spindle to prevent unintentional slow lowering
Table Size : 2200 x 660mm
Ramp Size : 690 x 660mm

Hydraulic Motorcycle Jack
For lifting Motorcycles / ATVs / Watercraft and Snowmobiles.
Swivel Castors for easy manoeuvrability.
Foot Pump with release valve.
Lifting capacity : 680kg / 1500lb
Lifting Range : 140mm to 410mm
Bottom size: 84 x 42cm
Salver size: 33.5 x 36cm

3 Ton Hand Operated Pallet Truck
Manual Pallet Jack

4pc Bigfoot Support Plate Set
Bigfoot support plates offer maximum safety on your camping trip.
Provides extra stability and prevents the caravan support feet
from sinking or slipping / stacking lifter / saddle stabiliser.
The Support Plates are made of robust and high quality plastic
Size : L 22.5 x W 16.5 x D 2.0cm - Extra large for stability.
Ideal for securing your Motor Home / Caravan or Trailer.