1 Tonne Transmission Jack
Capacity : 1 Tonne
Min Lifting Height : 1170mm
Max Lifting Height : 1970mm
Suitable for use in garages, workshops & industry.
Convenient hydraulic lifting via foot pedal for easy
and effortless operation of the engine jack.

3 Tonne Manual Pallet Truck
Rated capacity : 3 Tonne
Max. Lifting height : 200mm
Lowered Fork Height : 85mm
Fork length : 1150mm
Fork width : 550mm
Fork size : 160 x 55mm
Carrying wheel : 80mm diameter x 70mm
Steering wheel :180mm diameter x 50mm

Drum or Barrel Trolley
Rigid steel construction suitable for safe movement
and storage of steel and plastic barrels.
With 2 smooth-rolling, heavy-duty 150mm diameter wheels
and one 75mm diameter castor.
2 Position handle locks upright at 45 degree and
features tools for four different drum caps
and a metal drum tilting attachment.
Max. Load Capacity : 540kg

2 Wheel Chocks
With handle on the back for easy removal.
Brake wedge is placed behind the tyre of the vehicle and prevents rolling away.
Bars on the underside and the tyre surface increase grip.
Ideal for Cars / Trailers / Vans / Caravans.
Dimensions : 178 x 90 x 100mm / approx.

2pc Wheel Chock Set with Storage Brackets
Size : 22 x 9.0 x 11cm
Gives additional protection for parked trailers.
For use on car trailers/ light agricultural trailers / caravans etc

4pc Tesla Jack Pad Adaptor Set
Size : 75 x 50mm
Suitable for Tesla - 3 / Y / S / X model vehicles.
Simply insert the protection pad into the jack hole on the vehicle.
Avoids damaging the battery and the side skirt.

2 Ton Hydraulic Bottle Jack
Min. Height : 168mm
Max. Height : 316mm

6 Ton Hydraulic Bottle Jack
Min. Height : 207mm
Max. Height : 402mm

10 Ton Hydraulic Bottle Jack
Min. Height : 222mm
Max. Height : 447mm

20 Ton Hydraulic Bottle Jack
Min. Height : 235mm
Max. Height : 445mm

32 Ton Hydraulic Bottle Jack
Min. Height : 260mm
Max. Height : 420mm
Lifting Height : 160mm

20 Ton Air Hydraulic Bottle Jack
Min. Height : 260mm
Max. Height : 510mm
Ram Travel : 170mm
Height Adjustment : 80mm
Air pressure : 20 - 180psi

50 Ton Air Hydraulic Bottle Jack
Ram Travel : 160mm
Minimum Height : 270mm
Maximum Height : 430mm
Weight : 34kg
Air Inlet : 1/4in. BSP
Air safety valve to prevent overloading.
2 wheels for mobility and positioning

1 Tonne Trolley Jack Cross Beam Adaptor
Provides extraordinary stability for the entire front,
rear or side of a lifted vehicle
Extendable from 595mm to 920mm between saddle centres,
with 50mm adjustable saddle height.
Rubber protection on both saddles
Saddle Diameter : 128mm.
Pin Diameter : 30mm

1.5 Ton Hydraulic Trolley Jack
with Dual Lifting Pistons.
Lightweight Aluminium and Steel construction.
Capacity : 1.5 Ton
Min. Height : 90mm
Max. Height : 358mm
Net Weight : 14.3 kg
Gross Weight : 15.6kg

1.5 Ton Hydraulic Trolley Jack
Low Profile
Min. Height : 70mm
Max. Height : 610mm
Swivel caster wheels for easy moving

2.0 Ton Hydraulic Trolley Jack
Min. Height. 135mm
Max. Height. 340mm
Heavy Duty Steel Construction
Swivel caster wheels for easy moving

2.0 Ton Hydraulic Trolley Jack
Aluminium
Min. Height. 85mm
Max. Height. 425mm
Swivel caster wheels for easy moving

2.5 Ton Hydraulic Trolley Jack
Min. Height. 85mm
Max. Height. 610mm
Swivel caster wheels for easy moving

2.5 Ton Hydraulic Trolley Jack
with Dual Lift Pistons
Min. Height : 75mm
Max. Height : 515mm
Net Weight - 33.8kg
Size : 780 x 395 x 180mm

2.5 Ton Hydraulic Trolley Jack
Aluminium with Low Profile
Min. Height : 97mm
Max. Height : 480mm
Low lift height for easy access

3.0 Ton Hydraulic Trolley Jack
Min. Height : 165mm
Max. Height : 730mm with extension
Lifting Stroke : 536mm without load
Off-road jack will lift the biggest rigs on challenging surfaces
to help you create traction under wheels or change flats efficiently.
High capacity, non-pneumatic, composite wheels for durable heavy lifting.
Sealed ball bearings for smooth rolling and operation in difficult conditions.
Full-length steel skid plate to prevent sinking on sand and damage.
Ergonomic carrying handle to make moving easy.

3.0 Ton Hydaulic Trolley Jack
Professional
Min. Height : 100mm
Max. Height : 585mm
Fast lift system features 2-stage extra-large pistons.
Low-profile design fits easily under a wide variety of vehicles

3.0 Ton Hydraulic Trolley Jack
with Dual Lift Pistons
Min. Height : 130mm
Max. Height : 465mm
Net Weight - 29.3kg
Size : 670 x 375 x 195mm

3.0 Ton Hydraulic Trolley Jack
Min. Height : 100mm
Max. Height : 535mm
Swivel caster wheels for easy moving

3.0 Ton Hydraulic Trolley Jack
Min. Height : 130mm
Max. Height : 465mm
Net Weight - 28.2kg
Size : 615 x 375 x 200mm

3.0 Ton Hydraulic Floor / Trolley Jack
with Quick Lift Pedal
Min. Height : 145mm
Max. Height : 500mm
Net Weight - 37.2kg
Gross Weight - 39kg
Dimensions - 740 x 380 x 200mm

4 - 5 Tonne Fork Lift Trolley Jack
Low position capacity : 4 Tonne
High position capacity : 5 Tonne
Min. lifting height : 65mm / Low position | 416mm / High position
Max. lifting height 425mm / Low position | 24mm / High position
4 tonne scissor action jack
and a 5 tonne bottle style cylinder jack.
Built in overload valve and bypass valve.
Suitable for all types of vehicles,
including those with high and low clearance.

25 / 50 Ton Air Hydraulic Jack
Max Capacity : 25 / 50 Ton
Lifting Range : 165 - 330mm
Cylinder Diameter : 136mm
Air Pressure : 8 - 12 Bar
Lengthened Roof: 40 / 60mm
This is the Perfect Jack for Industrial Use.

Air Hydraulic Jack
Max Capacity : 40 / 80 Tonne
Lifting range : 205 - 385mm
Cylinder Diameter : 165mm
Air Pressure : 8 - 12 Bar
Lengthened Roof : 40 / 60mm
Ideal for Industrial Use

2.2 Ton Pneumatic Air Jack
with 3 bags and long handle base
Aluminium Alloy Air Valve
Min Height 150mm
Max Height 435mm
Air Pressure 120psi

48in. Multi-Functional Farm Jack
for lifting tractors or heavy trucks / pulling posts / poles
and even serves as an all-purpose hoist or winch.
Reversible ratchet enables jack to be used for lifting or lowering.
Minimum Height : 120mm
Maximum Height : 1045mm
Lift Capacity : 2.5 Ton

Wheel Lift - 1800lb
Vehicle Lift Capacity : 816kg
Cargo Deck loading capacity : 300kg
Cargo Deck size : 60 x 44cm
Stroke : 730mm
Minimum Height : 70mm
Minimum Tyre Diameter: 50cm
Maximum Tyre Width : 30cm
Can be used for lifting most vehicles.

1.5T Vehicle Lift
Air / Hydraulic
Rated Capacity : 1.5T
Maximum Height : 735mm
Min Height : 100mm
Air Working Pressure : 0.8mpa
For wheels from 19 - 29 inch

Hand Operated Hydraulic Pump with Gauge
Two-speed hydraulic system for fast and easy operation.
Minimal pumping effort to reduce operator fatigue.
Large release knob to improve controlled pressure release.
Internal pressure relief valve for overload protection.
Low / High pressure stage : 0 - 20 / 20 - 700 kg/cm
Oil capacity :700 - 1200cc
Hose length : 1.8M
Robust / durable and compact for use with split hydraulic products.

3 Ton Heavy Duty Jack Stands
Min. Height : 288mm
Max. Height : 425mm
Net Weight : 6.8kg
Dimensions : 225 x 205 x 360mm

6 Ton Heavy Duty Jack Stands
Min. Height : 395mm
Max. Height : 605mm
Net Weight : 12.9kg
Dimensions : 310 x 265 x 460mm

Aluminium / Steel Jack Stand Pair - 3 Ton
Heavy Duty Aluminium / Steel Construction
Capacity : 6000lb
Lifting Range : 10 - 16in. | 255 - 405mm

12 Ton Axle Stands
with Heavy Duty Steel Frame to prevent twisting for
safely support vehicles for extended periods of time.
Large saddles safely support loads.
5 Adjustable Height Positions
Capacity : 12 Ton / single
Min. Height : 300mm
Max. Height : 460mm

22 Ton Axle Stands
with Heavy Duty Steel Frame to prevent twisting for
safely support vehicles for extended periods of time.
Large saddles safely support loads.
5 Adjustable Height Positions
Capacity : 22 Ton / single
Min. Height : 353mm
Max. Height : 505mm

Automotive Door Hanger Cradle
Versatile Door Hanger for Auto Repair and Storage.
Saddle hole size range : 1.17in. to 1.19in. / 30 mm.
Padded removable side rails for protection during use.
For most floor jacks with removable saddles.
Perfect for hanging bumpers, storing glass, and
accommodating various auto repair or storage tasks

300mm Hydraulic Vehicle Positioning Jack
1500lb Lift Capacity
100mm Nylon Swivel Casters
Heavy Duty Bi-direction Hydraulic Mechanism
Heavy Gauge Steel Construction

Car Positioning Shells
Heavy Duty with 1500lb Capacity
Each Shell has 4 swivel casters with 2 locking casters.
Ideal for manoeuvring in small areas.
Checker plate surface for sure tyre grip.
For moving cars / tractors / boats / snowmobiles and other heavy vehicles.
1 Pair : 680kg

Auto Hydraulic Car Rotisserie - 4500LB
For 360 degree vehicle rotation with 12 pre-set positions.
Equipped with dual 8 Tonne hydraulic cylinders
to raise and lower the lifting cradles effortlessly,
plus a smart design that allows for one person operation.
Heavy duty balancing system with curved arch-shaped swing foot.
Fits body size from 1200mm to 6000mm
Adjustable Length : 3251 - 6650mm
Adjustable Height : 530-1245mm
Load capacity : 4500 LB

Tyre Transport Dolly
Ideal for use with up to eight tyres.
4 x 75mm swivel TPR castors plus brake
provides smooth and quiet manoeuvrability around the workplace.
Max. capacity : 136kg
Overall Size : 640 x 640 x 110mm

Light Duty Adjustable Wheel Dolly
Effortlessly install and remove truck wheel assemblies
with three positions for rollers on all 6.5in. to 22.5in. wheel size.
Protect expensive rims and wheel bolts with a compact design
that allows for one-person operation,
making it easy to collect and transport tyres and rims.
Max. Capacity : 150kg
Perfect for tyre shops and garages.

Heavy Duty Adjustable Wheel Dolly
Effortlessly install and remove truck wheel assemblies
with three positions for rollers on all 10in. to 22.5in. wheel size.
Protect expensive rims and wheel bolts with a compact design
that allows for one-person operation,
making it easy to collect and transport tyres and rims.
Max. Capacity : 250kg
Perfect for tyre shops and garages.

100kg Wheel Storage Trolley
Freestanding wheel storage trolley for all types of vehicle wheels.
Smooth-running rollers and parking brakes ensure a secure stand.
Simple and quick setup.
Prevents tyre distortion caused by deflation.
Free-floating storage prevents condensation.
Wheel-preserving support.
Easy to assemble.

2pc Tyre Saver Ramps
Suitable for tyres with diameters from :
10inch / 25.4cm to 20inch / 50.8cm
Prevents flat spots on your tyres.
Works with most types of wheel clamps.
Suitable as a vehicle stop by bolting to garage floor.
Suitable for use with caravans / trailers
and any vehicle that is stationary for long periods.

Low Rise Car Ramps
Size : L700 x W200 x H70mm
with 80mm end stop.
Capacity : 5000kg per pair
Manufacturer from Polypropylene
Ideal for low access for trolley jacks.