110pc Copper Washer Set
Copper Gaskets
30 x 1/4in.
25 x 5/16in.
20 x 3/8in.
15 x 7/16in.
10 x 1/2in.
10x 5/8in.

150pc Fuel Injector Copper Seal Ring Set
For Diesel injector ports ( CDI ).
Sizes : 13.8 - 20.0mm External Diameter
Sizes : 7.3 - 9.4mm Internal Diameter
Depth : 1.3 - 3.0mm
10 of each size

150pc Oil Drain Plug Washer Set
Copper O-Rings
Sizes : 10 - 24mm External Diameter
Sizes : 5.0 - 17.5mm Internal Diameter
Depth : 1.0 - 2.0mm
10 of each size.

Injector Copper Ring Set
Suitable for:
Deutz / Fiat / Ford / Iveco / Kia / Land Rover
MAN / Mazda / Mercedes / Renault / Universal

10mm Hex Bit
with 1/2in.Dr Socket
Tamper-proof for Fuel Injectors

3pc Socket Set with Unique Profile
for Bosch Diesel Injection Distributor Pumps
1/2in.Dr / Chrome Vanadium

Tri-Point Socket Set - 5pc 1/2in.Dr
For Triangular Profile Tamper-proof Fixings
Sizes : 8 | 10 | 12 | 15 | 16.5mm
For Injection Pumps and Bosch Injectors
Applicable to VAG vehicles with TDi engines

5pc Socket Set with unique profile for
Bosch Diesel Injection Distributor Pumps
7.0mm 1/4in.Dr / 15mm Hex
12.6mm 1/4in.Dr / 1/2in. Sq
14.4mm 1/2in.Dr
26.0mm 1/2in.Dr
12.4mm oval socket 1/2in.Dr

Flexi-Shaft Carburettor Adjuster
280mm flexible shaft reaches into confined areas.
5 quick change adapters for multiple applications.
2mm ( 3/32 ) and 2.5mm ( 1/8 ) Hex Bits
4.5 mm and 1/4in. Hex sockets.
and Double D Socket.
Applicable to most GM vehicles and
1.7 to 2.2L Chrysler 1978 onwards

Vacuum Carburettor Synchronizer Kit
To synchronise the values of up to 4 carburettors
Features a bank of 4 gauges with lockable valves
80mm gauges with fixed plate and 4 x 750mm rubber hoses.
Long and short carburettor adaptors and connectors.

False Actuator Kit
for Delphi Sealed Rail Kits to extend
testing on common rail diesel engines.
The false actuators trick the common rail pump
into producing the maximum pump pressure which
confirms the pump is able to work under maximum load.
For Bosch | Delphi | Denso | Siemens

Flow Meter and Adaptor Set for Common Rail Diesels
Measurers the amount of fuel injectors return to the deposit tank.
For use on up to 6 Injectors.
Adaptors for Bosch / Siemens / Denso / Delphi injectors

24pc Flow Meter Adaptor Set
For common rail diesel engines.
To be used on injector nozzles together with common rail diagnosis kit.
Adaptors fit most systems such as Siemens . Bosch . Denso etc.

Flow Meter for Common Rail Diesel Engines
Measures the return flow of diesel injectors.
Allows simultaneous measurement of the pressure
in 6 injectors and identifies any damaged injectors.
For Bosch | Delphi | Denso | Siemens systems.
Graduated reservoir bottles : 105ml capacity
Fuel-resistant transparent hoses : 650mm long.
Graduated manometer tubes : 95ml capacity
With bottle rack hanger for engine bay.

Fuel Injection Pressure Test Kit
For Schroder test-port fuel injection systems.
Quick coupling system with safety valve.
Dual scale gauge - 0-145psi and 0-1000kpa
with hanging hook and protective bumper.

Turbo Pressure Gauge
Fuel Injection Pressure Gauge
Suitable for all vehicles.
Supplied with nut and 2M PU tube.
Pressure: 1 to 3 Bar

Turbo System Leak Tester
Used in conjunction with an air line to show the presence of leaks.
Kit supplied with 8 stepped adaptors to fit most hose sizes.
Features a pressure gauge with shut-off valve and pressure release valve.
Can also be used on cooling systems.

41pc Fuel Injection Test Set
High Pressure Gauge with Dual Readings of 0-145psi and 0-1000kpa
Low Pressure Gauge with 0-15psi or 0-100kpa
Adaptors Feature Quick Couplings for Easy Connection

Universal Injector Seat Cleaning Set
For cleaning diesel injector seats prior to fitting new injectors.
Silicone Nylon brushes 15 and 20mm.
Steel wire brushes 18 | 22 | 25mm.
Steel wire injector nozzle port cleaner.
224mm long Bit

Diesel Injector Seat Cleaning Set
For efficient cleaning of injector ports and seating
before changing or when reconditioning diesel injectors.
Helps to avoid blow-back due to poorly seated injectors.
Suitable for most vehicles
With Cleaning Brushes
Injector Seat Cutters and Guide
Seal Puller

Injector Seat and Shaft Cleaning Kit
Used to remove rust / carbon and other debris
and efficient cleaning of injector seats and shafts on diesel engines.
Suitable for a wide range of vehicles and engines.
With Wire Brushes : 25.1 | 29.

3pc Diesel Injector Bore & Sleeve Cleaning Kit
Long Spiral Tube Brush :
290mm Long with 150mm bristles up to 35mm diameter
Spiral Tube Brush :
275mm Long with 80mm bristles up to 35mm diameter
Flat Bottom Brush :
260mm Long with 50mm bristles / 17mm diameter
With durable galvanized shaft and polypropylene handles

6pc Wire Brush Set
153mm Stainless Steel Brushes -
Diameter : 13 | 19 | 25 | 31 | 41 | 50mm.
Suitable for cleaning and removing rust and debris
from the internal surfaces of engine components -
Pipes / Tubes and Bores etc.

11pc Wire Brush Set
For cleaning inside Copper Pipes and Fittings.
Sizes : 8 | 10 | 13 | 16 | 19 | 22 | 25 | 28 | 32 | 41 | 50mm
ABS Handles with support hole for storage.
Stainless Steel wire bristles ideal for removing
both patina and any dirt from the surface.

8pc Common Rail Diesel Injector Repair Kit
For repairing common rail diesel injectors Bosch / Siemens and Denso.
Set comes with all necessary sockets to open up defective injectors :
Injector ball valve lapping tools
Hex Bits : 6.6mm | 7.6mm
Denso common rail injector valve seat removal tool
8 Sided socket for Bosch common rail injectors
Inside fixing removal tool for Siemens common rail injectors.

10pc Injector Clamping Bolt Thread Repair Set for Mercedes-Benz
Suitable for reaming the broken-off expansion bolt
and repairing the M6 thread in the cylinder head.
No need to remove the cylinder head or valve covers.
Drill : 6mm and Step Drill : 7 to 8 mm with adjustable depth ring.
Guide Sleeve for 6 mm twist drill
Tap : M8 x 1.0mm and Assembly tool for threaded inserts
5 threaded inserts : M6 x 1 inner thread / M8 x 1 outer thread.

85pc Assorted Leak Off Connectors
Suitable Connectors for Bosch / Siemens / Delphi Injectors.
T Type for PA Tube
T Type for Rubber Tube
L Type for PA Tube
Offset for Rubber Tube
90 degree for Rubber Tube
102 degree for PA Tube
Snap Lock Delphi Type for PA Tube

Truck Injection Nozzle Socket
4 Teeth
Hex Drive : 24mm
Diameter : 22.2mm Inner | 32mm Outer
Height : 84.5mm
For use in servicing Commercial Vehicle Diesel Injectors.
on Mercdes | MAN 422 / 403 & Scania Trucks.

Diesel Injector Nozzle Tester
Used to adjust and calibrate the injection nozzle opening pressure
and to carry out leakage / spray pattern and chatter characteristic tests.
For nozzle sizes - R | S | T
With 100mm Pressure Gauge : 0-60 Mpa / 0-600 bar
and supplied with 1 - M12 pipe and 2 - M14 pipes.

Fuel Injector Tester
For Injector fuel delivery problems on
petrol vehicles with electronic fuel injection.
Powered by the 12 Volt vehicle battery.
Large LED display / 4 Pulse Modes
Detects faults such as clogged or leaking fuel injectors
sluggish or sticky fuel injectors and wiring harness faults.

11pc Electronic Fuel Injection Test Light Set
Crucial for electronic fuel injection systems
Systems covered :
TBI - Ford | GM | Geo
PFI - Bosch | GM
SCPI - GM / Multec 2 / 1987
GM 1982 equipped vehicles.

Internal Castellated Socket - 1/4in.Dr
10mm / 8 Point / 50mm Long / O/D : 14.5mm.
for Turbo Diesel Inlet Housing Bolts on R9M 1.6L Engines
Found in Nissan NV300 / Renault Trafic
and Vauxhall / Opel Vivaro vehicles.

VW / Audi Turbo Charger Wrench
12mm Double Hex - 12pt | 3/8in.Dr
Special wrench for use on diesel engines with
Turbo Chargers fitted to VW and Audi vehicles.
This offset wrench reaches underneath the turbo charger
to assemble or disassemble the 12mm bolts.
Applicable to VAG V6 TDI Diesel Engines

VAG Turbo Actuator Adjustment Set
1/4in.Dr Socket - 10mm x 50mm Long.
12pt Spanner - 10 / 12mm x 143mm long.
Unique spanner and split socket for removing
fitting and adjusting the turbo pressure capsule
and charge pressure actuator on VAG vehicles.

14mm Open End Ring Wrench
for Diesel Injector Pipes
Ideal for injectors that have difficult access
Twin hexagon profile suitable for most diesel engines
Chrome Molybdenum

17mm Open End Ring Wrench
for Diesel Injector Pipes
Ideal for injectors that have difficult access
Twin hexagon profile suitable for most diesel engines
Chrome Molybdenum

Injection Line Flare Nut Socket
14mm - 3/8in.Dr
For Mercedes Benz Sprinter
Can be used on any 14mm flare nut
Maximum Torque : 25Nm
Chrome-Molybdenum

14mm Fuel Injection Line Socket - 1/2in.Dr
120mm long Open 12 point socket for screwed in Injection Lines
found on Diesel Common Rail Injection Systems
For BMW and VW Diesel Engines.

17mm Fuel Injection Line Socket - 3/8in.Dr
120mm Long Open 12 point socket for screwed in Injection Lines
found on Diesel Common Rail Injection Systems
For BMW and Opel 2.5TD Diesel Engines

17mm Fuel Injection Line Socket - 1/2in.Dr
120mm long Open 12 point socket for screwed in Injection Lines
found on Diesel Common Rail Injection Systems
For Mercedes vehicles

19mm Fuel Injection Line Socket - 1/2in.Dr
125mm long Open 12 point socket for screwed in Injection Lines
found on Diesel Common Rail Injection Systems
For Mercedes vehicles

3pc Injection Line Socket Set
1/2in.Dr / 12 Point / 125mm Deep
For the removal and re-connection of Diesel Fuel Injector Line fittings.
14mm for BMW | VW vehicles.
17 and 19mm for Mercedes vehicles.

6pc Diesel Injector Line Socket Set - 1/2in.Dr
Sizes : 12 | 14 | 16 | 17 | 18 | 19mm x 100mm Deep
For dismantling injectors on most diesel engines.

Fuel Injector Tube Seal Installation Tool
Designed to quickly and easily replace the injector tube seals
found on DV6 1.6 16V Diesel Engines found in -
Fiat / Ford / Mazda / PSA / Suzuki and Volvo vehicles.

2pc Fuel Injector Socket Set - 17mm / 12 Point / 3/8in.Dr
For the installation and removal of Ford Power Stroke Diesel injectors
The depth stop design keeps sockets at the proper height.
Thick mass to reduce flex and flare nut damage.
Crowfoot design for removing various injector lines easily
and without damaging electrical connections.
Application : Ford 6.7L Power stroke diesel engine,
complies with Ford TSB 11-10-10.
Chrome-Molybdenum

21mm Ford Duratorq Diesel Injector Socket
1/2in.Dr with Cut Away
For use on the Ford Duratorq Diesel Engine
OEM Code : 303-677

Ford Duratorq Diesel Injector Alignment Tool
For Ford Duratorq Diesel Engines
2.0 / 2.2 / 2.4 DI / TDCI / TDDI fitted to -
Mondeo 2000 - 2007
Transit 2000 - 2006
Jaguar X type 400

Ford Duratorq Injector Alignment Tool
Alignment Bar and Adjustable Clamp
to hold the injectors in place and align them
with the fuel lines while the injectors are secure.

HGV Diesel Fuel Injector Nozzle Socket
For the removal of diesel injector nozzles on
MAN / Mercedes and Sania commercial vehicles
Use with a 22mm Spanner

Diesel Injection Valve Socket
For MAN and Mercedes Trucks
4 Tooth Socket x 72mm Deep
22mm - inside diameter
28mm - outside diameter
Applicable to : MAN 422 / 403
Mercedes Benz and Scania Trucks.