Scania Transmission Rear Oil Seal Tool
For installing the transmission oil seal without causing damage.
Applicable to :
SCANIA transmission flange shafts and rear axle.
e.g. Simmer Rings part : 1 502 384 / 1 502 385

Crankshaft Seal Ring Assembling Tool
for Scania 114 commercial vehicles and trucks.
For damage free installation of the rear crankshaft seal ring.
Applications : Scania / 114 - 340 / 360 / 380.
Suitable for seal rings : 140 x 160 x 12mm
OEM Code : 1433183

Injection Valve Cap Socket
1/2in.Dr / 8 PT / 100mm Deep
Diameter : 38mm Inner | 45mm Outer
For tightening and loosening electromagnetic injection valve caps.
Applicable to : Scania / 340 Trailer

Brake Caliper Socket
Hex : 24mm | 5 teeth
For adjusting the Calipers on brake systems from Knorr.
Applicable to : Scania / Volvo ADDB22X / SN6 / SN7 / SK7.

80mm Front Hub Nut Socket
1in.Dr | 8 Point
for Scania Trucks
Drop Forged CRM

17mm Budd Wheel Nut Socket - 1in.Dr
Square Profile
Length : 90mm
Applications : Isuzu / Mitsubishi Fuso / Hino
Chrome-Molybdenum

Budd Wheel Nut Socket
19mm - 3/4in.Dr
Length: 90mm / Square Profile
For Mitsubishi Canter, Fuso
Chrome Molybdenum

Budd Wheel Nut Socket
21mm - 3/4in.Dr
Length: 90mm / Square Profile
For Isuzu, Mitsubishi Fuso and Hino.
Chrome Molybdenum

Budd Wheel Nut Socket
20mm x 38mm - 1in.Dr
Length : 99mm / Hex profile.
For Mitsubishi Canter / Canter FE111 - Rear
Chrome Molybdenum

Budd Wheel Nut Socket
21mm x 41mm - 1in.Dr
Length : 99mm / Hex profile.
For Toyota Dyna and Dynaps 140 / Rear.
Toyota Dyna and Rino / Front.
Isuzu NPR / Front / Rear.
Chrome Molybdenum

Scania Engine Crankshaft Alignment Tool
1/2in. Drive
For manually rotating the engine crankshaft into position.
Applicable to : Scania Trucks up to 1996
OEM Code : 99309

Scania Wheel Nut Socket
113mm | 118mm | 3/4in. Drive
Special profile with 8 external studs
Removal and installation of the mounting nut on the axle bearing.
Designed for high tightening and release torques.
Applicable to : Scania 420 / heavy duty tipper axis
Stud : 10 x 8mm / 12mm deep

Scania Front Wheel Socket
83mm | 103mm | 1in. Drive | 8 point
Height : 74mm
For removal / fitting axle nuts in front of the brake disc
on Scania front axles / 124L / 144L
Series 4 from 96 for vehicles above 16 tons.

Scania Rear Hub Nut Socket
100mm | 123mm | 3/4in. Drive | 8 point
Height : 84mm
For positive drive of the axle nut.
Any extensive slipping is avoided.
Milled out profile.
Applicable to : SCANIA rear axle nuts

Scania Leaf Spring Bolt Socket
3/4in.Drive
Size : 28 x 37mm
For truck servicing or repair.
Suitable for Scania leaf spring bolts on the front axle

Shock Absorber Spring Washer Socket
Size : 34 x 46mm | 3/4in.Dr
For Rear Spring Shackle Pin on Scania vehicles.
Designed for high release and tightening torques.

Shock Absorber Spring Washer Socket
Size : 34 x 56mm | 3/4in.Dr
For Rear Spring Shackle Pin on Scania vehicles.
Designed for high release and tightening torques.

Axle Clamp Nut Socket
56mm | 3/4in.Dr for Commercial Vehicles.
For loosening / tightening the clamp nut on the axle stub.
Applicable to : DAF / Man / Mercedes-Benz / Kassbohrer & Setra

Axle Clamp Nut Socket
60mm | 3/4in.Dr for Commercial Vehicles.
For loosening / tightening the clamp nut on the axle stub.
Applicable to : DAF / Man / Mercedes-Benz / Kassbohrer & Setra

Volvo Crankshaft Rotating Tool
1/2in.Dr
For rotating the crankshaft on commercial vehicles via flywheel ring gear.
Applicable to : Volvo 6L and 12L.
Engines : D9A | D12 | D16C and FM 360 8x4.
OEM Code : 9996959

Brake Shoe Tool for Volvo Trucks
Required when repairing the drum brakes.
Designed for opening and fixing the brake shoe retaining spring.
Also for the dismantling and assembling of the jaw pins.
Features drive spindle for continuous opening.
Applicable to ERF E Series and EC Series :
N7 | N10 | N12 | F7 | F12 | F16 | FH12 | FH16 | FL7 | FL10
OEM Code : 9998550.

Volvo Wheel Shaft Cover Socket
for Volvo commercial vehicles.
Size : 115mm | 8 Point | 3/4in. Drive
Professional impact socket for truck repairs like
the removal of front and rear axle covers found on
Volvo commercial vehicles.
OEM Code : 9996773.

Volvo Truck Shock Absorber Spring Compressor
Allows safe compression of the cabin spring for shock absorber removal.
Spring size : ID : 65mm | OD : 89mm.
Use with 1/2in.Dr Ratchet.
Application : Volvo Trucks FM | FH 500P | 540P
For hand tool use only - do not use with power tools.
Do not exceed 80Nm torque.
Always ensure the weight of the cab is correctly supported.
To remove the top fixing on the shock absorber -
use in conjunction with Cab Shock Absorber Tool - CT7368

HGV Cab Shock Absorber Tool for Volvo Trucks
For the removal and installation of HGV cab shock absorbers.
Used to counter hold the piston rod
while simultaneously turning the screw cap.
Upper base nut extractor / installer.
Outer socket : 18mm single Hex profile.
Inner socket : 10mm x 7.5mm Double D profile
Suitable for use with CT7367.
Manual operation.

Heavy Duty Universal Joint Puller for Commercial Vehicles
For the quick and easy removal of cardan joints on drive shafts.
Puller foot opening : 65mm
Puller foot height : 8mm
Puller foot depth : 65mm
Total depth : 69mm
Clamping height : 55mm
Spindle length : 110mm
Suitable for 1in. impact wrenches

Digital Tyre Pressure Gauge for Trucks
2 Way Head design
Gauge measures 5 to 150psi / plus or minus 1psi
Gauge reads PSI / BAR and KPA
with back illumination for low light viewing

Dead Blow or Bumping Hammer
Plastic Handle with 105mm Rubber Head
Low blow-back due to steel balls in the head which
provides increased impact for loosening stuck wheel rims
when changing tyres - Heavy duty for trucks and SUVs
Handle length: 780mm
Weight : 4500g