Brake Caliper Socket
Hex : 24mm | 5 teeth
For adjusting the Calipers on brake systems from Knorr.
Applicable to : Scania / Volvo ADDB22X / SN6 / SN7 / SK7.

80mm Front Hub Nut Socket
1in.Dr | 8 Point
for Scania Trucks
Drop Forged CRM

17mm Budd Wheel Nut Socket - 1in.Dr
Square Profile
Length : 90mm
Applications : Isuzu / Mitsubishi Fuso / Hino
Chrome-Molybdenum

Budd Wheel Nut Socket
19mm - 3/4in.Dr
Length: 90mm / Square Profile
For Mitsubishi Canter, Fuso
Chrome Molybdenum

Budd Wheel Nut Socket
21mm - 3/4in.Dr
Length: 90mm / Square Profile
For Isuzu, Mitsubishi Fuso and Hino.
Chrome Molybdenum

Budd Wheel Nut Socket
20mm x 38mm - 1in.Dr
Length : 99mm / Hex profile.
For Mitsubishi Canter / Canter FE111 - Rear
Chrome Molybdenum

Budd Wheel Nut Socket
21mm x 41mm - 1in.Dr
Length : 99mm / Hex profile.
For Toyota Dyna and Dynaps 140 / Rear.
Toyota Dyna and Rino / Front.
Isuzu NPR / Front / Rear.
Chrome Molybdenum

Scania Engine Crankshaft Alignment Tool
1/2in. Drive
For manually rotating the engine crankshaft into position.
Applicable to : Scania Trucks up to 1996
OEM Code : 99309

Scania Wheel Nut Socket
113mm | 118mm | 3/4in. Drive
Special profile with 8 external studs
Removal and installation of the mounting nut on the axle bearing.
Designed for high tightening and release torques.
Applicable to : Scania

Scania Front Wheel Socket
83mm | 103mm | 1in. Drive | 8 point
Height : 74mm
For removal / fitting axle nuts in front of the brake disc
on Scania front axles / 124L / 144L
Series 4 from 96 for vehicles above 16 tons.

Scania Rear Hub Nut Socket
100mm | 123mm | 3/4in. Drive | 8 point
Height : 84mm
For positive drive of the axle nut.
Any extensive slipping is avoided.
Milled out profile.
Applicable to : SCANIA rear axle nuts

Scania Leaf Spring Bolt Socket
3/4in.Drive
Size : 28 x 37mm
For truck servicing or repair.
Suitable for Scania leaf spring bolts on the front axle

Shock Absorber Spring Washer Socket
Size : 34 x 46mm | 3/4in.Dr
For Rear Spring Shackle Pin on Scania vehicles.
Designed for high release and tightening torques.

Shock Absorber Spring Washer Socket
Size : 34 x 56mm | 3/4in.Dr
For Rear Spring Shackle Pin on Scania vehicles.
Designed for high release and tightening torques.

Axle Clamp Nut Socket
56mm | 3/4in.Dr for Commercial Vehicles.
For loosening / tightening the clamp nut on the axle stub.
Applicable to : DAF / Man / Mercedes-Benz / Kassbohrer & Setra

Axle Clamp Nut Socket
60mm | 3/4in.Dr for Commercial Vehicles.
For loosening / tightening the clamp nut on the axle stub.
Applicable to : DAF / Man / Mercedes-Benz / Kassbohrer & Setra

Volvo Crankshaft Rotating Tool
1/2in.Dr
For rotating the crankshaft on commercial vehicles via flywheel ring gear.
Applicable to : Volvo 6L and 12L.
Engines : D9A | D12 | D16C and FM 360 8x4.
OEM Code : 9996959

Volvo Wheel Shaft Cover Socket
for Volvo commercial vehicles.
Size : 115mm | 8 Point | 3/4in. Drive
Professional impact socket for truck repairs like
the removal of front and rear axle covers found on
Volvo commercial vehicles.
OEM Code : 9996773.

Heavy Duty Universal Joint Puller for Commercial Vehicles
For the quick and easy removal of cardan joints on drive shafts.
Puller foot opening : 65mm
Puller foot height : 8mm
Puller foot depth : 65mm
Total depth : 69mm
Clamping height : 55mm
Spindle length : 110mm
Suitable for 1in. impact wrenches

Digital Tyre Pressure Gauge for Trucks
2 Way Head design
Gauge measures 5 to 150psi / plus or minus 1psi
Gauge reads PSI / BAR and KPA
with back illumination for low light viewing

Dead Blow or Bumping Hammer
Plastic Handle with 105mm Rubber Head
Low blow-back due to steel balls in the head which
provides increased impact for loosening stuck wheel rims
when changing tyres - Heavy duty for trucks and SUVs
Handle length: 780mm
Weight : 4500g