Injector Copper Ring Set
Suitable for:
Deutz / Fiat / Ford / Iveco / Kia / Land Rover
MAN / Mazda / Mercedes / Renault / Universal

16pc Hex / Star / E-Socket and Bit Set
With 3/4 and 1in. Drive Adaptors plus 4mm Hex Key
Hex Bits : 17 | 19 | 22 | 24mm x 107mm Long
Star Bits : T60 | T70 | T80 | T90 | T100 x 107mm Long
E-Sockets : E18 | E20 | E22 | E24 x 107mm Long
For Truck Cylinder Head Bolts / Wheels and Shock Absorbers etc

24pc Impact Socket and Bit Set
Adaptor : 1in.Dr x 22mm Hex x 62mm long
Adaptor : 3/4in.Dr x 22mm Hex x 52mm long.
Hex Bits : 14 | 17 | 19 | 21 | 22 | 24 | 27 | 30 | 32mm
Spline Bits : M16 | M18 | M20.
Star Bits : T60 | T70 | T80 | T90 | T100
Star Sockets : E18 | E20 | E22 | E24 1/2in.Dr with 22mm Hex.
For use with impact drivers on commercial vehicles.
2.5mm Hex key for locking the bits into the driver.

6pc Impact Socket Set - 3/4in.Dr
12 point Sockets : 17 and 19mm
E-Sockets : E18 | E20 | E22 | E24
Ideal for Cylinder Head Bolts and Servicing on most Trucks

6pc 1in.Dr Shallow Impact Socket Set
Sizes : 80 | 85 | 90 | 95 | 100 | 105mm
Chrome-Molybdenum

6pc 1in.Dr Shallow Impact Socket Set
Sizes : 95 | 100 | 105 | 110 | 115 | 120mm
Chrome-Molybdenum

3/4in.Dr Torque Wrench
Range : 140 - 980Nm
With Push 'Thru' Head
Suitable for Trucks

3/4in.Dr Torque Wrench
Range : 140 - 980Nm with 8 marked settings
Reversible Ratchet with 18 Teeth
Accurate to plus or minus 4 percent
Suitable for wheel / bearing nuts / prop shaft flanges
and any extra large nut that needs accurate torque setting.

3/4in.Dr Torque Wrench
Reversible Ratchet Mechanism with 48 Teeth
Clear audible release signal.
Torque Range : 200 - 800Nm
Square Drive : 3/4in.
Accuracy : +/- 3%.
Suitable for setting torque for fasteners with right-hand thread.
Ideal for industrial and commercial vehicle applications.
Extra Long robust design in two-parts.

1in.Dr Torque Wrench
Range : 140 - 980 Nm
With Push 'Thru' Head
Suitable for Trucks

1in.Dr Torque Wrench
Range : 140 - 980 Nm with 8 marked settings
Reversible Ratchet with 18 Teeth
Accurate to plus or minus 4 percent
Suitable for wheel / bearing nuts / prop shaft flanges
and any extra large nut that needs accurate torque setting.

1in.Dr Torque Wrench
Reversible Ratchet Mechanism with 24 Teeth
Clear audible release signal.
Torque Range : 300 - 1500Nm
Square Drive : 1in.
Accuracy : +/- 3%
Suitable for setting torque for fasteners with right-hand thread.
Ideal for industrial and commercial vehicle applications.
Extra Long robust design in two-parts.

3/4in.Dr Torque Wheel Wrench
Maximum Torque : 4800Nm
Sockets : 30 | 32 | 33mm
Transmission Ratio : 68:1

1in.Dr Torque Wheel Wrench
with 38mm Socket for the installation of truck wheels
Transmission Ratio. 1.68
Maximum safe output Torque. 4800Nm

E18 Star Slogging Wrench
with 2 striking faces.
Central 20mm / 3/4in. Square Drive
For E-type fixings on commercial brake Calipers
found on front and trailing axles.
This wrench allows assembly and disassembly of the brake Calipers
without removing the steering tie rod.

E20 Star Slogging Wrench
with 2 striking faces.
Central 20mm / 3/4in. Square Drive
For E-type fixings on commercial brake Calipers
found on front and trailing axles.
This wrench allows assembly and disassembly of the brake Calipers
without removing the steering tie rod.

E24 Star Slogging Wrench
with 2 striking faces.
Central 20mm / 3/4in. Square Drive
For E-type fixings on commercial brake Calipers
found on front and trailing axles.
This wrench allows assembly and disassembly of the brake Calipers
without removing the steering tie rod.

M24 Slogging Wrench
12-point with 2 striking faces.
Central 20mm / 3/4in. Square Drive
For commercial brake Calipers on front and trailing axles.
This wrench allows assembly and disassembly of the brake Calipers
without removing the steering tie rod.

M26 Slogging Wrench
12-point with 2 striking faces.
Central 20mm / 3/4in. Square Drive
For commercial brake Calipers on front and trailing axles.
This wrench allows assembly and disassembly of the brake Calipers
without removing the steering tie rod.

Truck Injection Nozzle Socket
4 Teeth
Hex Drive : 24mm
Diameter : 22.2mm Inner | 32mm Outer
Height : 84.5mm
For use in servicing Commercial Vehicle Diesel Injectors.
on Mercdes | MAN 422 / 403 & Scania Trucks.

HGV Diesel Fuel Injector Nozzle Socket
For the removal of diesel injector nozzles on
MAN / Mercedes and Sania commercial vehicles
Use with a 22mm Spanner

Diesel Injection Valve Socket
For MAN and Mercedes Trucks
4 Tooth Socket x 72mm Deep
22mm - inside diameter
28mm - outside diameter
Applicable to : MAN 422 / 403
Mercedes Benz and Scania Trucks.

4pc Diesel Truck Injector Socket Set
70mm 4 Teeth with M14 x 1.5mm receiver thread
72mm 4 Teeth
120mm 4 Teeth
120mm 3 Teeth for injectors with electrodes

4pc Diesel Truck Injector Socket Set
for working on nozzle holders
1/2in. Dr Socket - 72mm long with 4 teeth
2 Sockets with 32mm outer hexagon and 4 teeth
1/2in.Dr Socket - 120mm long with 3 teeth

9pc Diesel Injector and Glow Plug Socket Set
1/2in.Dr Diesel Injector Sockets :
21mm x 90mm |
22mm x 78mm | 22mm x 110mm
27mm x 78mm |
28mm x 78mm | 28mm x 83mm
3/8in.Dr Glow Plug Sockets :
8 | 10 | 12mm x 158mm long with Universal Joint.

6pc Diesel Injector Extractor Set
Fuel injector puller for new generation trucks.
Applicable to trucks with injector-pump systems
or with traditional truck injectors on -
Volvo / Scania / Mercedes / MAN / Renault / IVECO.
With Socket for Delphi injectors / Injector Hook / Extension and Upper handle
Body-tamper / Universal joint / M18 x 1.5 nut.

Diesel Injector Removal Hydraulic Upgrade Kit
Providing 17 Ton Hydraulic force for diesel injector removers allowing
the controlled extraction of very tight fitting or struck injector nozzles.
Can be used in conjunction with CT3617
Hydraulic Cylinder with M16 x 1.5 Nut and Spacer Ring.
Pull Spindles M14 x 1.5 external thread - 240 / 315mm
Pull Spindles M17 x 1.0 internal thread - 240 / 315mm
Pull Spindle M18 x 1.5 internal thread - 250mm
Pull Spindle M25 x 1.0 internal thread - 240mm

Injector Nozzle Puller - Volvo HGV
Designed to aid extraction of the unit-injectors from Volvo HGV engines.
Ideal where the unit pump has overheated and stuck in the cylinder head.
Applicable to :
Volvo trucks - FM12 | FM440 | FH500
Volvo Penta marine engines - D9 | D12 | D16.
Includes slide hammer and
Puller Attachment Clamp to keep the assembly in place.

Injector Sleeve Service Set - Volvo FM Trucks
For removing or installing HGV Injector Sleeves.
Applicable to Volvo FM12 Trucks.
Contains Pre-Cutter and Removing and Mounting Tools
OEM Codes : 9998252 | 9998253 | 9998688.

Injector Sleeve Service Set - Volvo FM Trucks
For installing and removing sleeves from the cylinder head.
Sleeves need to be replaced when the truck seems powerless
and smokes with black clouds.
Two Leg Puller | Extractor Unit
Injector Sleeve / Pre-Cutter / Removal and Mounting Tools
OEM Codes : 21515329 | 88800387
9986174 | 9998252 | 9998253 | 9998688

Injector Sleeve Service Set - Volvo FM12 Trucks
For installing and removing sleeves from the cylinder head.
Sleeves need to be replaced when the truck seems powerless
and smokes with black clouds.
Two Leg Puller
Extractor Unit
Injector Sleeve Mounting Tool
OEM Codes : 88800387 | 9986174 | 9998688
Use in conjunction with sleeve installer kit - CT6715

Fuel Injector Sleeve Installation Kit
Applicable to Volvo FM12 Trucks.
For use with injector sleeve remover and installer set -
See CT6713 / CT6714
OEM Code : 21515329.

5pc Fuel Pump Water Drain Valve Plugs
For Ford 6.7 | 6.7L Diesel HFCM
Ford Truck / Pickup 2017-2022
F250 / F350 / F450 / F550 Super Duty 6.7L V8 Diesel Engines.
Easy Installation.
OEM Code : HC3Z-9J305-A

3pc Diesel Oxygen Sensor Socket Set
28mm Injector Socket 1/2in.Dr 12 point
7/8in. Injector Socket 1/2in.Dr 12 point
7/8in. Long-reach Vacuum Switch Socket
applicable to a wide range of vehicles

Engine Compression Test Kit
Compression pressure testing up to 50 bar.
Suitable for most petrol and modern HDI / TDCI
pump injector and older diesel engines.
Quick couplings for straight or angled versions.
Glow plug adaptors | Spark plug adaptors M10 / M12 / M14 and M18.
Injector adaptors M20 / M22 / M24 and stanadyne injectors
Additional pressure gauge for pressure drop test.
Suitable for most cars / trucks / buses / agricultural and marine engines.

Crankshaft Alignment Tool
1/2in.Drive with 2 gears
Used in conjunction with 1/2in.Dr Ratchet
Allows the engine crankshaft position to be manually rotated.
Applicable to :
MAN 12 cylinder engines and
Mercedes 6 / 8 and 10 cylinder engines.

8pc HGV Cooling System Pressure Test Kit
For testing leaks in heavy goods vehicle cooling system.
Adaptors have quick-release couplings and pump is fitted with large
easy to read dial clearly marked in both psi and bar.
Quickly identifies faulty gaskets / radiators / weeping pipes
and other causes of coolant loss
Applicable to : DAF / ERF / Iveco / MAN
Renault / Mercedes-Benz / Scania / Volvo

Oil Dipstick for Mercedes Trucks
Designed to measure the transmission oil level.
Applicable : BENZ trucks.
Spring length : 860mm

9pc Oil Sump Plug Keys
Special Profile Set for assembly and disassembly of
plastic oil drain screws on plastic oil sumps.
Supplied with 3/8in.Dr T-handle or use with 17mm Socket.
For manual operation - do not use power tools.
Applicable to : Ford / PSA / BMW / VAG / Mercedes / DAF / MAN / GM.

Oil Filter Wrench - 1/2in.Dr / Chain Type
up to 120mm capacity
Double chain provides powerful and smooth operation.

32mm Ball Joint Remover
for Cars, Light Trucks and SUVs
Opening on the support fork : 32mm
Opening on the puller housing : 70mm
Max. pressure range : 92mm
Hex Drive : 26mm
Suitable for impact wrenches.

39mm Ball Joint Remover for Commercial Vehicles
For use on most trucks including - Scania / Mercedes-Benz / MAN etc.
Ideal for track rod ends and steering knuckles.
Opening on the support fork : 39mm
Opening on the puller housing : 80mm
Max. pressure range : 94mm
Hex Drive : 26mm
Chrome-Molybdenum Suitable for impact wrenches.

7pc Brake Caliper Rewind Tool Kit
For resetting brake pistons on Iveco Truck disc brakes
Suitable for Iveco Stralis / Euro cargo / Daily
With : 10mm Ratchet Wrench
Magnetic Rewind Tool with Backing Plate
Reset Discs with 2 and 3 pins
8mm Hex Bits with 10mm drive
NOTE : 2 Pin Reset Disc is 3/8in.Dr

4pc HGV Brake Caliper Socket Set
Hex 8mm | 10mm | S8 and 11PT
12mm Hex Drive
for Commercial SAF / NFZ / Knorr brake Caliper systems

Brake Caliper Socket
11pt Spline | 3/8in.Dr | 26mm Deep
For Knorr-Bremse Brake Calipers on Volvo trucks also
DAF / Foden / MAN / Mercedes / Scania / BOVA
plus BPW & SAF Trailers.

25pc Universal Press and Pull Sleeve Set
for HGV and Commercial Vehicles
such as LGVS, HGVS, Tractors etc.
Ideal for Hydraulic or Silent Bushings, Ball Bearings, Oil Seals.
Can be used with spindle and hydraulic workshop press.
Slotted sleeves allow easy view of the bearing or bushing.
Inner Sleeve Sizes : 74 - 112mm / 2mm steps.
Outer Sleeve Sizes : 84 - 122mm / 2mm steps.
Spindle Sizes : M10 x 3 / M12 x 3 / M14 x 3 / M16 x 3 / M18 x 3.

4pc Wheel Budd Internal Thread Restoring Kit
For Use on Vehicles that use Budd Wheel Nuts
M12 x 1.25 for PSA
M12 x 1.5 for BMW
M12 x 1.5 for Mercedes
M12 x 1.75 for Volvo
M14 x 1.5 for VAG Vehicles

Locating Tube for Groove Nut Sockets
Size : 46mm Inner | 52mm Outer
Practical connector system with fixing screw.
Useful for different groove socket nuts.
Enables stable work position.
Prevents slippage of the socket.
Change

Locating Tube for Groove Nut Sockets
Size : 54mm Inner | 60mm Outer
Practical connector system with fixing screw.
Useful for different groove socket nuts.
Enables stable work position.
Prevents slippage of the socket.
Change

Locating Tube for Groove Nut Sockets
Size : 60mm Inner | 67mm Outer
Practical connector system with fixing screw.
Useful for different groove socket nuts.
Enables stable work position.
Prevents slippage of the socket.
Change through loosening of the grub screw on the hexagon.