Rear Hub Nut Socket - Ford Transit
1/2in.Dr Heavy duty 4 point specialised impact socket
for removing the rear hub nut on RWD Ford Transit vehicles 2014 -.
Alignment shaft allows accurate location onto castellated nut.

Front Wheel Bearing Socket
1/2in.Dr with 4 pins / 6mm diameter.
For the front wheel bearing lock ring on Suzuki Jimny Grand Vitara.
For use with both manual and impact wrenches.
OEM Code : 09951-16050
Kent-Moore J-37763

Socket Set - 7pc For Wheel Bearing Lock Nuts
Contains one of each 2-3/8in . 2-1/2in and 55mm Sockets
2-1/2in . 2-3/4in . 2-9/16in and 2-3/8in rounded lock nuts
1/2in Drive

9pc Groove Nut Socket Set - Outside Teeth
with 1/2in.Dr and 3/4in.Dr Sockets
For removing and installing DIN 981 Locknuts
Suitable for following grooved nut sizes :
1/2in.Dr : KM4 | KM5 | KM6 | KM7 | KM8
3/4in.Dr : KM9 | KM10 | KM11 | KM12

9pc Groove Nut Socket Set - Inside Teeth
with 1/2in.Dr and 3/4in.Dr Sockets
For removing and installing DIN 981 Locknuts
Suitable for following grooved nut sizes :
1/2in.Dr : KM4 | KM5 | KM6 | KM7 | KM8
3/4in.Dr : KM9 | KM10 | KM11 | KM12

13pc Special Socket Set
with Internal Teeth for Grooved Nuts
Sizes :18 | 22 | 25 | 28 | 32 | 38 | 45 | 52 | 58 | 65 | 70 | 75 | 80mm
For gently loosening and tightening groove nuts
60mm Long with 1/2in.Dr

105mm Hub Nut Socket
1in.Dr
for DAF Trucks
Drop Forged CRM

80mm Front Hub Nut Socket
1in.Dr | 8 Point
for Scania Trucks
Drop Forged CRM

10 Ton Hydraulic Shop Press
Heavy Duty H-frame 10 tonne hydraulic shop press with sliding ram.
Adjustable crosspiece - 3 positions : 95 / 180 / 265mm
Capacity : 10 tonne
Work Range : 0- 340mm
Ram Stroke : 135mm
Ideal for Straightening / Bending and Stamping
With safety valve to protect the press from overloading.
Complete with two flat V-shaped blocks.

20 Ton Hydraulic Shop Press
Floor Standing Heavy Duty H-Frame
Stroke : 160mm
Work Range : 0 - 998mm
G.W. : 104kgs
N.W. : 102kgs
Package Size : 1630 x 190 x 320mm
Ideal for Straightening / Bending and Stamping

30 Ton Hydraulic Shop Press
Floor Standing Heavy Duty H-Frame
Ideal for Straightening / Bending and Stamping

50 Ton Hydraulic Shop Press
Floor Standing Heavy Duty H-Frame Construction
Capacity : 50 Tons
Working Range : 0 - 1000mm
Ram Stroke : 185mm
Air Pressure : 110 - 120psi
Air Inlet : 1/4in. NPT
Ideal for straightening / Bending and Stamping.

Universal Hydraulic Press Support Block
For use with a workshop press
Guarantees a perfect and safe support
Length: 2750mm
Width: 210mm

6pc Hydraulic Press Accessory Kit
For use with up to 50 Ton press
Constructed from high quality material to ensure long lasting durable performance.
Kit Includes :
3 x Punches : 1/2 | 1 | 1-7/8in.
2 x Steel press plates : 14 x 3 x1in.
1 x Bearing shield
Can be used in a variety of press applications.

14pc Wheel Hub Grinder Set
10 Grinding Discs 40mm diameter / 14mm deep.
Drive Connector : 1/4in. / 6mm shank
1/2in.Dr - 8mm Hex Adaptor
Made from Nylon and carborundum.
For removing rust and road debris from wheel hubs and brake discs.

7pc Wheel Hub Grinder Set
6 Grinding Discs 40mm diameter / 14mm deep.
Drive Connector : 6mm shank
Made from Nylon and carborundum.
For removing rust and road debris from wheel hubs and brake discs.

Impact Drive Stud & Hub Cleaning Tool Set for HGVs
For Air or Power Impact Wrenches with 1/2in.Dr
Suitable for HGV wheel studs up to 28mm diameter
with a maximum length of 80mm.
With Impact Drive Locking Sleeve and Disc Adaptor.
6 Abrasive Discs :
50 x 12 | 50 x 13 | 50 x 14mm.
60 x 16 | 60 x 22 | 60 x 28mm.

Rotary Abrasive Hub Cleaning Tool - 1/2in.Dr
Suitable for vehicle wheel hubs up to 150mm diameter
Optimized for wheel hubs with enlarged inner 90mm diameter.
For quick and easy removal of dirt and rust from wheel hubs
and brake discs with wheel support bolt.
Quick cleaning of the contact surfaces.
For use with air impact or power / cordless tools - 1/2in.Drive
Interchangeable abrasive velcro disc replacement - CT6186

Rotary Abrasive Hub Cleaning Disc
or Grinding Wheel
Replacement Disc for CT6185
Inner diameter : 90mm / Outer diameter 150mm