5pc Brake Caliper Piston Rewind Kit - 3/8in.Dr
With powerful internal spring
T-Bar : 150mm | Main Body : 110mm plus Reaction Plate.
Magnetic 2 pin adaptor with 5mm diameter pins - for any standard rewind adaptor.
Adjustable 2 pin adaptor with 3mm diameter pins
from 25mm to 34mm pin centres - for electronic park brakes.
Adjustable 3 pin adaptor with 3mm diameter pins
from 17mm to 30mm pin centres - for common brake Caliper applications.

Disc Brake Piston Rewind Set
For Push-back and Wind-back disc brake Pistons
For brake pad replacement and Caliper servicing on collette type brakes

7pc Disc Brake Piston Rewind Tool Kit
Adjustable 2 pin adaptor fits most vehicles.
Adjustable 3 pin adaptor only to be used with
Electronic Park Brake / EPB tools.
Applicable to : Audi | B29 | BMW | Iveco Daily |
Renault | Range Rover | Seat | VW | Volvo

7pc Brake Caliper Rewind Tool Kit
For resetting brake pistons on Iveco Truck disc brakes
Suitable for Iveco Stralis / Euro cargo / Daily
With : 10mm Ratchet Wrench
Magnetic Rewind Tool with Backing Plate
Reset Discs with 2 and 3 pins
8mm Hex Bits with 10mm drive
NOTE : 2 Pin Reset Disc is 3/8in.Dr

18pc Disc Brake Piston Rewind Set
With Right and Left threaded Spindles
For Pads on both Wind Back and Push Back Type Brakes
Suitable for most makes and models.

Disc Brake Piston Caliper Rewind Set
Left and Right Hand Thread
24 Adaptors and Caliper Keys
6 and 7mm Hex Keys
3 and 5mm Pin Punches
4 Special Reaction Plates

Disc Brake Caliper Piston Rewind Set
Air Powered Wind Back Tool 80-100psi
Compatible with 3/8in.Dr tools
Right and Left hand Operation
Converter for 2 pin Adaptors
15 Wind Back Keys

Air Powered Brake Piston Rewind Tool
For servicing / replacement of worn brake disc pads
Suitable for push back and wind back brake Pistons
Compatible with 3/8in.Drive Adaptors

Disc Brake Piston Compressor
Special wide compressor for 4 Piston Calipers.
Jaw width - 88mm
Applicable to -
BMW and Mercedes Benz with
the 4 Piston Disc Brake models

87mm Disc Brake Pad Spreader
Use with 1/2in.Dr Ratchet or 21mm Spanner.
Suitable for ATE / Bendix / Delco and Girling Calipers.
Standard and 4-Piston Disc Brakes.

Ratchet Type Brake Caliper Press
Evenly spreads force in a parallel manner
to prevent misalignment of Pistons.
Allows work on 2 and 4 Piston fixed Calipers
as well as single and twin Piston floating Calipers.

Disc Brake Pad Spreader
Suitable for ATE / Bendix / Delco and Girling Calipers.
Standard and 4-Piston Disc Brakes.

Disc Brake Pad Puller
For the quick removal of disc brake pads.
Especially useful where brakes have seized.
Mini slide hammer to ease pad from Caliper

Disc Brake Pad Spreader with Twin Bolts
Used to compress Pistons back into Calipers
when installing new brake pads on any single or dual sliding type Caliper
Swivelling nose pieces reduce the chance of Piston cocking
Fine threaded screws for added pressure

Hydraulic Brake Hose Clamp
One-handed snap action Clamp for Brake hydraulic hoses.
Dimensions : 210 x 40 x 10mm

2pc Brake Line Jig Set
Clamp both new and old lines parallel
to each other to make exact copies.
A brake line can consist of many angles /
bends that should be correct for the new line to fit.
For steel / cooper and plastic coated brake lines
with 3/16in. or 1/4in.| 4.75mm to 6.3mm diameters.

Brake Pipe Bender and Clamp Set
Diameters : 4.75 - 6mm | 3/16 - 1/4in.
Steel, copper, cupro-nickel and plastic coated pipes
With 2 mini pipe benders
For use with a 6mm hex key or a 1/4in.Dr Ratchet / not included.
Designed for clamping brake pipes in-situ,
enabling the new pipe to be held next to the existing pipe,
so that the replacement can be shaped
to replicate the one that its replacing.

Brake Pipe Bender
Tube Diameter Sizes : 3 | 4 | 6mm
Lever style pipe bender for creating smooth 0 - 90 degree bends.
Suitable for aluminium, steel, copper and cupro-nickel tubing.

Brake Pipe Bender
Tube Diameter Sizes : 6 | 8 | 10mm
Lever style pipe bender for creating smooth 0 - 90 degree bends.
Suitable for aluminium, steel, copper and cupro-nickel tubing.

Brake Pipe Bending Tool
for bending 5mm diameter brake lines.
With 2 bending options - Tight and Open radius bends.
Central 6mm Hex slot

Brake Pipe Bending Pliers
Special shaped jaws.
Bend 3/16in. and 1/4in. brake and fuel lines.
Forged steel.
Cushioned grips.
Bends without distortion.

Brake Pipe Bender / Straightening Tool
For aligning deformed brake lines,
use on pipes up to 4.75mm | 3/16in. or 6.35mm | 1/4in. diameter.
T-bar handle and triple roller design for precise, controlled use.
Does not change the diameter of the pipe.
For precise bending up to 90 degrees.
For copper, aluminium, brass and soft steel piping.

Universal Bending Tool
Forms wire and flat metal
into Clamps / handles / brackets / hooks and coils.
Easily attaches to work bench or vice to make angle bends up to
5/16in. / 8mm diameter Rod and
1-3/16 x 1/12in. / 30 x 2mm Flat Metal.

Tube Straightener
For straightening tubing from 3/16in. to 1in. diameter.
Equipped with double precision bearings and sturdy nylon rollers,
guaranteeing a smooth process for brake and fuel line pipes.
Suitable for a wide variety of materials, including
soft Aluminium, Copper, Plastic and brake line tubing.
Ideal for multiple applications in automotive and HVAC systems.

Mercedes Brake Spring Installer
Unique tool for Mercedes vehicle parking brake.
For disassembly and assembly of spring clips on rear disk brakes
Length : 132mm

Handbrake Shoe Retaining Spring Tool
with 2mm wide guide slot.
for Mercedes-Benz V-Class Vehicles.
Enables access to the retaining clips behind the rear drive flange.
For easy removal and fitting of the shoe retaining clips
on the handbrake shoes.
Applicable to : Vito / Vitano -
Typ 638 / 1996 - 2003
Typ 639 / 2003 - 2014
Typ 447 / from 2014

Brake Spring Pliers
220mm long
For the removal of drum brake return springs.
One end grips on the brake lining the other hooks onto the spring.
Suitable for most vehicle drum brakes.

153mm T-Handle Assembly Hook
For Brake Springs and also Headlight units

4pc HGV Brake Caliper Socket Set
Hex 8mm | 10mm | S8 and 11PT
12mm Hex Drive
for Commercial SAF / NFZ / Knorr brake Caliper systems

Air Brake Adjustment Wrench Set - HGV
Used for adjusting automatic slack adjusters.
U-shape tool able to fit securely under the pull pawl
allowing hands free operation to release the tension button.
5/16in. 8 point offset reversible wrench with soft grip
for adjusting the brake adjuster clearance and
releasing the anti reverse mechanism without prying.

Brake Caliper Socket
11pt Spline | 3/8in.Dr | 26mm Deep
For Knorr-Bremse Brake Calipers on Volvo trucks also
DAF / Foden / MAN / Mercedes / Scania / BOVA
plus BPW & SAF Trailers.

E20 Brake Caliper Socket for MAN / TGL
For the dismantling and assembly of brake line fittings.
30mm Hex drive with spring ball.
Chrome-Vanadium

E24 Brake Caliper Socket for MAN / TGL
For the dismantling and assembly of brake line fittings.
30mm Hex drive with spring ball.
Chrome-Vanadium

13mm SAF Brake Disc Socket - 12 point
Designed for the dismantling and assembly of brake discs.
External hexagon drive : 19mm
For machinery usage
Chrome-Molybdenum

15mm SAF Brake Disc Socket - 12 point
Designed for the dismantling and assembly of brake discs.
External hexagon drive : 19mm
For machinery usage
Chrome-Molybdenum

17pc Brake Caliper Socket and Bit Set
Impact Hex Bits : 7 | 8 | 9 | 11mm
Special Brake Caliper Sockets : 11.5 | 14 | 15 | 20 | 22mm
Pentagon Sockets : 10 | 12.5 | 14 | 19mm
Pentagon Bit :10mm
For use on brake Calipers when replacing the brake pads.
Applicable to : Alfa Romeo / Audi / BMW / Ford / Mercedes / Porsche.

3pc 1/2in.Dr Socket and Bit Set Brake Servicing Kit
Pentagon Profile

8pc Brake Caliper Bleed Nipple Repair Kit
Suitable for repairing Brake Caliper Bleed Nipples : M5 to M8.
Contents :
Drill : 8.5mm
Tap : 1/8in. - BSP28
6 Bleed Nipple Inserts : 1/8in.- BSP28 x 30mm

8pc Brake Caliper Bleed Nipple Repair Kit
Suitable for repairing Brake Caliper Bleed Nipples : M8 to M10.
Contents :
Drill : 10mm
Tap : M11.5 x 1.0mm
6 Bleed Nipple Inserts : M11.5 x 36mm

12pc Brake Caliper Guide Bolt Thread Repair Set
Used for repairing faulty inner threads on
brake Caliper guide bolts in wheel bearing
housing brake Caliper carriers with NO
need to remove the wheel bearings or struts.
For use on most Ford -
Vauxhall / Opel - Vauxhall | Opel and
VAG - Audi | Seat | Skoda | VW vehicles.

15pc Brake Caliper Thread Repair Set
For rethreading brake Caliper bolt holes.
With Step drill to increase hole sizes.
M12 x 1.5mm tap step drill insert locator.
Washers with centre roller bearing.
10 replacement inserts.

16pc Brake Calliper Thread Repair Set
with 10 replacement threads.
Step Drill | M9 x 1.25 Tap | 7mm Hex Key
Drilling Gauges : Ford 105mm | Opel 94mm | VAG 91mm
For replacing damaged brake caliper threads
with a new threaded insert.

5pc ABS Sensor Reamer Set - 1/4in.Dr
1/4in.Dr. / 125mm long T-Bar Handle.
4 popular sized reamers for removing dirt / dust and rust.
Sizes : 14 x 32mm | 15 x 23mm | 18 x 23mm | 18 x 34mm.
Applicable to most makes and models of vehicles.
BMW / Fiat Group / Ford / Mercedes / PSA / VAG.

5pc Elbow Connector Socket Set
Sizes : 12 | 14 | 17 | 19 | 22mm
3/8in.Dr / Single Hex and 50mm Deep
Chrome Vanadium
Suitable for L-type pipe fittings on trucks.
Suitable for construction equipment and general machinery.

Manual Tube Expander
7-in-1 Pipe Expander for copper and aluminium tubing.
Sizes : 6 | 8 | 10 | 12 | 16 | 19 | 22mm
1/4 | 5/16 | 3/8 | 1/2 | 5/8 | 3/4 | 7/8in.
Made of heavy duty alloy steel for a long working life.

Universal Flaring Too Kit
Adjustable | 5 - 16mm
For creating conical / tapered flares.
For Brass or Aluminium pipes.
Size range : 5 - 16mm | 3/16 - 5/8in.

Micro Brake Pipe Flaring Tool - 3/16in. SAE
For Copper / Cupronickel and Steel Pipes.
Hand-held brake pipe flaring tool that is capable of forming both
SAE single and double flares in 3/16in. / 4.75mm diameter pipes.
The compact design makes it ideal for on vehicle use and
allows for it to fit in an engine bay or under a wheel arch
when replacing or repairing a brake pipe.
High-pressure punch grease also included to lubricate friction surfaces.

6pc Pipe Flaring Kit
Steel Compressor Yoke : 3/16 | 1/4 | 5/16 | 3/8 | 1/2 | 5/8in.
Flaring Tool
Flexible Tube Benders
Tube Cutter 3 - 28mm

6pc Brake Pipe Flaring Kit
With Quick Release Dies
Brake Flaring Tool Suitable For 3/16in. or 4.75mm Diameter Tubing
Secure Clamping with Quick Release.

7pc Flaring Tool Set
For Single or Double Flaring Aluminium and copper tubing
Adaptors for 3/16 | 1/4 | 5/16 | 3/8 | 1/2in. Tube or 4.8 - 12.7mm