Alternator Pulley Tool for Ford EcoBlue
For removing the overrun alternator pulley.
T50 Star Bit - 1/2in.Dr / 93mm Long
with 17mm / 24mm Hex Drive Collar
Chrome-Vanadium
Applicable to : Ford transit / custom / Connect
Ecosport / Kuga / Mondeo / Focus / Galaxy
S-Max / C-Max / Edge / Puma.
OEM Codes : 414-009 | 414-009/1 | 414-009/2.

2pc Extra Deep Socket Set - 3/8in.Dr
6 Point Sockets - Sizes : 10 | 12mm x 120mm long
Ideal for heavily recessed fixings that have extra long bolts
for example some bumper, rear lamp and door hinge fitting.
Ideal for Diesel glow plugs with 10mm and 12mm hex fittings
plus suitable for Mercedes C-Class / W240 rear bumper cover.
Also suitable for adjusting the handbrake on BMW / Ford / Opel / VAG.
Chrome-Vanadium

Straight Glow Plug Socket Pliers
Straight for direct access to glow plug connectors.
Helps to prevent damage to glow plugs.
Soft grip handles with thumb restraints.
Suitable for diesel engines on -
BMW / Mercedes / VAG and Volkswagen

90 Degree Offset Glow Plug Socket Pliers
Angled for the removal of hard to reach glow plug connectors.
Helps to prevent damage to glow plugs.
Soft grip handles with thumb restraints.
Suitable for diesel engines on -
BMW / Mercedes and VAG

3pc Glow Plug Socket Set
Sizes : 8 | 9 | 10mm
Sockets with a lateral slot
for restricted access.
Use with a 10mm Spanner
Chrome Vanadium
Applicable to Fiat / GM vehicles

4pc 3/8in.Dr Glow Plug Socket Set
Sizes : 8mm | 10mm | 12mm.
72mm long with universal joint
Plus 75mm extension bar.
For all popular glow plugs.
Chrome Vanadium

6pc 3/8in.Dr Socket Set for Glow Plugs
Sizes : 8 | 9 | 10 | 12 | 14 | 16mm with Universal Joints
85mm Long
Chrome Vanadium

6pc 3/8in.Dr Socket Set for Glow Plugs
Sizes : 8 | 9 | 10 | 12 | 14 | 16mm
with Universal Joint

18pc PSG Glow Plug Removal Set
Includes the latest special sockets for Pressure Sensor Glow Plugs.
Extension Bar | Universal Joint - 1/4in.Dr
8 | 12mm Deep Socket - 1/4in.Dr - 50mm long
8 | 9 | 10mm Deep Sockets 1/4in.Dr and 3/8in.Dr with universal joints.
8 | 9 | 10mm Sockets with a lateral slot - Use with a 10mm Spanner
5 PSG plastic anti-static protection caps.

11pc Master Service Set
for Spark Plugs and Glow Plugs
Spark Plug Sockets : 14 | 16 | 16 thin wall / 21mm
Glow Plug Sockets : 8 | 10 | 12mm
22mm Sensor Socket
Extension Bars 75mm and 250mm

Ford Glow Plug Removal Tool
Used to remove and install the glow plug harness
on 2004 - 2009 Ford 6.0L Diesel Engines.

Glow Plug Electrode Removal Tool Set
Suitable for M8 and M10 glow plug threads
Tap sizes
M8 x 1.0 | M10 x 1.0 | M10 x 1.25
M3 x 0.5 Tap 100 mm
M4 x 0.7 Tap 100 mm
Special drills 2.5 x 120 mm | 3.3 x 140 mm
180 mm pulling bolt

6pc Glow Plug Electrode Socket Set - 1/4in.Dr
For turning off the electrodes in conjunction with CT3381
Sockets : 2.6 | 3.2 | 3.5 | 4.5 | 6.5 | 8.25 mm

Universal Glow Plug Extractor Kit
Contraction collet : size 1 / 2.7mm
Contraction collet : size 2 / 3.6mm
Contraction collet : size 3 / 5.0mm
Contraction collet : size 4 / 6.0mm
T-bar slide hammer / puller
Internal expansion collet puller

Glow Plug Removal & Re-Thread Set
For removing damaged or difficult glow plugs from the cylinder head
also Re-Threading 8mm or 10mm glow plug ports
Ratchet T-Bar | Drill Holding Adaptor
Puller Outer Housing and Adaptor Mandrels | Force Screw / Nut
Top Connection Removal Tool Star socket
Pilot Drills : 3.5mm | Pilot Drill Centring Sleeves
Step Drill : 5.5 - 9 - 10mm
Taps : 1/4in. | M8 | M10
Allen Key

Glow Plug Removal Master Kit
For removing 8-10mm damaged and broken glow plugs from cylinder heads
With special glow plug extractors and puller adapter mandrels -
M8 | M10 | 1/4in. Taps small / large anti-clockwise taps
Ratchet T-bar / Extractor Sockets
Step Drill / Drill Bits / Pilot drill centring sleeves.
Glow plug chamber cleaning brushes.
Hex keys

6pc Glow Plug Puller and Reamer Set
Glow Plug Sockets : 8 | 9 | 10mm with Universal Joint
Reamers : M10 | M12
For the removal of glow plugs and port maintenance on most diesel engines.

3pc Glow Plug Reamer Set
For cleaning the glow plug port aperture.
Cleaning the port aperture is recommended before installation of new glow plug.
M12 x 1.25 x 59mm reamer | 6.9mm Diameter
M12 x 1.25 x 94mm reamer | 6.9mm Diameter

Glow Plug Aperture Cleaning & Reamer Set
Reamers : M8 | M10 | M12.
Glow Plug Adaptors : M8 x 1.0 | M10 x 1.0 | M10 x 1.25 | M12 x 1.25.
145mm knurled handle drive shaft -
use with 14mm socket or 1/4in.Dr ratchet

33pc Glow Plug Thread Repair Kit
Taps : M8 | M10 | M10 | M12 | M12 | M14
Insert Drivers : M8 | M10 | M10 | M12
Tap Guide Pins : 8 x 45 | 10 x 45 | 12 x 45
Thread Inserts : M8 | M10 | M10 | M12
Insert Guide Rod and Knurled Head
For damaged cylinder head glow plug threads.

Thread Repair Kit for Glow Plugs - M8 x 1.0
Taps and coil inserts for repairing M8 glow plug threads.
5 x 12mm Deep Inserts
with black phosphate finish.

Thread Repair Kit for Glow Plugs - M10 x 1.0
Taps and coil inserts for repairing M10 glow plug threads.
5 12mm Deep Inserts
5 19mm Deep Inserts
with black phosphate finish.

Thread Repair Kit for Glow Plugs - M12 x 1.25
Taps and coil inserts for repairing M12 glow plug threads.
5 x 12mm Deep Inserts
5 x 19mm Deep Inserts
5 x 26mm Deep Inserts
with black phosphate finish

13 Blade Feeler Gauge
Range : 0.05 | 0.10 | 0.15 | 0.20 | 0.25 | 0.30
0.40 | 0.50 | 0.60 | 0.70 | 0.80 | 0.90 | 1.0mm

Universal Spark Plug Gap Tool
Suitable for all 10 | 12 | 14 | 16mm threaded spark plugs.
Place the spark plug into the tool and
choose the correct feeler gauge thickness,
then turn the knob until the side electrode
is compressed to the correct gap.

Spark Indicator
tests without puncturing wire
Flashing bulb indicates spark
with Pocket Clip

Ignition Spark Tester
Adjustable High Energy Ignition Spark Tester Coil Tool
For checking the ignition voltage
Screw adjustment allows for different gap requirements
For use on ignition systems from 0 to 40000V.
Background allows spark to be seen even in bright sunlight.
Simply plug into high tension lead and ground to engine with Alligator Clip.
Tests for no start and for spark strength.

Spark Plug Boot Puller
Plastic T-Handle Boot Puller prevents damage to connectors
For one hand use on metal or rubber boots.

VW / Audi Spark Plug Boot / Cable Puller
For removing and installing hard to reach spark plug connectors.
Applicable to VW beetle 2.0 engines
and suitable for VW GOLF IV / V with 1.6 engine
VW | Audi | Bora | Mercedes and Smart.

Spark Plug Terminal Pliers
For the safe removal and Installation of HT leads without damage to cables

14mm Spark Plug Socket
3/8in.Dr / 65mm Long with Thin Wall.
12pt / Bi-Hexagon
for BMW vehicles
Chrome Vanadium

14mm Spark Plug Socket - 3/8in.Dr
90mm Long Magnetic with Thin Wall.
Bi-Hexagon / 12pt
Knurled for easy grip
Ideal for BMW / NGK R5 Plugs with large porcelain
Chrome Vanadium

14mm 3/8in.Dr Extra Long Spark Plug Socket
12 point 14mm x 250mm long
Outside diameter : 19.6mm
With Internal Magnet
Perfect for Cars and Motorbikes

16mm 3/8in.Dr Extra Long Spark Plug Socket
12 point 16mm or 5/8in. x 250mm long
Outside diameter : 20.9mm
With Internal Magnet
Perfect for Cars and Motorbikes

18mm 3/8in.Dr Extra Long Spark Plug Socket
12 point 18mm x 250mm long
Outside diameter : 25mm
With Internal Magnet
Perfect for Cars and Motorbikes

21mm 3/8in.Dr Extra Long Spark Plug Socket
12 point 21mm x 250mm long
Outside diameter : 27mm
With Internal Magnet
Perfect for Cars and Motorbikes

14mm 3/8in.Dr Spark Plug Socket
12 point 14mm x 310mm long
With Internal Magnet and Universal Joint

16mm 3/8in.Dr Spark Plug Socket
12 point 16mm x 310mm long
With Internal Magnet and Universal Joint

3pc Spark Plug Socket Set
with 16 and 21mm Sockets
3/8in.Dr T-Handle with Universal Link

4pc Spark Plug Socket Set
3/8in.Dr - Sizes : 14 | 16 | 21mm / 16mm Thin Wall
63mm Deep
Chrome Vanadium

4pc Spark Plug Socket Set
with 14 | 16 | 18 | 21mm Sockets
3/8in.Dr with Universal Joint
Chrome Vanadium

8pc Spark Plug Socket Set - 3/8in.Dr
Magnetic Swivel Sockets with Thin Wall
14mm x 100 & 150mm Deep
16mm x 100 & 150mm Deep
16mm x 300mm Deep
13/16in. x 150mm Deep.
1/2in.Dr to 3/8in.Dr Adaptor.
Spark Plug Gap Tool.
Made of chrome vanadium steel.

2pc Spark Plug Socket Set
1/2in.Dr Magnetic
Sizes : 16mm and 21mm
With Internal magnets to aid spark plug removal.
Chrome Vanadium

M8 x 1.0 / 115mm Internal Spark Plug Rethread Tool
For cleaning and re-cutting Spark Plug and Glow Plug Threads
Simple handling due to eccentric function
Special length for deep seated thread
Quick and low-cost thread repair
Centring shaft
With conical mounting shaft for thread repair sleeves
External hexagon drive
With knurled knob

M10 x 1.0 / 115mm Internal Spark Plug Rethread Tool
For cleaning and re-cutting Spark Plug and Glow Plug Threads
Simple handling due to eccentric function
Special length for deep seated thread
Quick and low-cost thread repair
Centring shaft
With conical mounting shaft for thread repair sleeves
External hexagon drive
With knurled knob

M12 x 1.25 / 140mm Internal Spark Plug Rethread Tool
For cleaning and re-cutting Spark Plug and Glow Plug Threads
Simple handling due to eccentric function
Special length for deep seated thread
Quick and low-cost thread repair
Centring shaft
With conical mounting shaft for thread repair sleeves
External hexagon drive
With knurled knob

M12 x 1.25 / 270mm Internal Spark Plug Rethread Tool
For cleaning and re-cutting Spark Plug and Glow Plug Threads
Simple handling due to eccentric function
Special length for deep seated thread
Quick and low-cost thread repair
Centring shaft
With conical mounting shaft for thread repair sleeves
External hexagon drive
With knurled knob

M14 x 1.25 / 140mm Internal Spark Plug Rethread Tool
For cleaning and re-cutting Spark Plug and Glow Plug Threads
Simple handling due to eccentric function
Special length for deep seated thread
Quick and low-cost thread repair
Centring shaft
With conical mounting shaft for thread repair sleeves
External hexagon drive
With knurled knob

M14 x 1.25 / 270mm Internal Spark Plug Rethread Tool
For cleaning and re-cutting Spark Plug and Glow Plug Threads
Simple handling due to eccentric function
Special length for deep seated thread
Quick and low-cost thread repair
Centring shaft
With conical mounting shaft for thread repair sleeves
External hexagon drive
With knurled knob

M18 x 1.5 / 90mm Internal Spark Plug Rethread Tool
For cleaning and re-cutting Spark Plug and Glow Plug Threads
Simple handling due to eccentric function
Special length for deep seated thread
Quick and low-cost thread repair
Centring shaft
With conical mounting shaft for thread repair sleeves
External hexagon drive
With knurled knob