60pc Nylon Washer / Fibre Gasket Set
Nylon : 1/2in. | 12mm | 14mm
Fibre : 1/2in. | 16mm | 18mm | 20mm
Suitable for Oil Drain Plugs

120pc Ford Drain Plug Gasket Set
20 x M12 x 21 x 2.5
20 x M12 x 22 x 2
20 x M12 x 25 x 1.2
20 x M14 x 22 x 2.5
20 x M14 x 24 x 2
20 x M14 x 25 x 1.5

Heavy Duty Drill Pump
Suitable for Oil and Fluids.
6mm Drill Shaft.
1/2inch diameter Hose.
Max. Output - 1500 L/ph at 3000 rpm
Max. Pumping Height - 15M
Max. Output Pressure - 3 bar at 3000 rpm
Max. Self-priming to 300cm

12 Volt Oil Pump / Extractor
Suitable for diesel heating or motor oil.
Connect to 12 Volt battery using crocodile clips.
Will remove oil using access through the dipstick port.
Complete with all necessary accessories.
NOT suitable for fuel use or flammable liquids.
Ideal equipment for quick and clean oil-changes.

4L Manual Oil and Fluid Vacuum Extractor
For Engine Oil and Water supplied with Funnel and
PVC Tubes : 8mm dia x 1000mm | 10mm dia x 1300mm
For removing engine oil through the dipstick tube.

9L Manual Fluid Extractor
Suitable for extracting oil from vehicles and industrial machinery
also suitable for low-viscosity fluids such as water.
Automatic safety shut off mechanism when the tank is full.
Supplied with 3 tubes : 4mm /

9L Pneumatic Fluid Extractor
Suitable for extracting oil from vehicles and industrial machinery.
Also suitable for low viscosity fluids such as water.
May be used with most standard workshop air compressors.
Automatic safety shut off mechanism when tank is full.
Simple Push Button Use - extract liquids from tanks quickly and easily.
Working Pressure : 70 - 170psi
Air Inlet : 1/4in.
Air Consumption : 5cfm

9 Litre Manual / Pneumatic Fluid Extractor
This Fluid Extractor may be used in conjunction with a compressor
or manually when an air line is not available.
Suitable for extracting oil from vehicles and industrial machinery.
Also suitable for low viscosity fluids such as water.
With 6 and 10mm diameter suction probes and brake bleeding hose.
Working pressure : 70 -170psi
Air inlet: 1/4in.
Air consumption: 5cfm

Oil Can and Lubrication Gun

1/4 pint Oil Can

1/2 pint Oil Can

1 pint Oil Can

2 litre Measuring Jug
with Flexible Spout and Cap
PE construction suitable for Oil

5 litre Clear Oil Jug
with Flexible Spout and Cap

5 litre Fluid / Oil Measuring Jugs
Blue / Green / Red / Yellow coloured coded dust caps
to identify contents and prevent contamination
Polyethylene with removable / flexible spout.
Screw Lids and Spouts for dust and pollutant protection
also prevents drips and spillages
Makes lubrication work easier / faster / safer and cleaner.
Suitable for engine oil / brake fluid /
battery fluid and other non-acidic fluids.

2 litre Blue Oil Can
For Oil and other Fluids
Material : Pe

6 litre Blue Oil Can
For Oil and other Fluids
Material : Pe

Universal Oil Funnel Set
For Hands-free working.
Funnel connects to oil filler neck.
No unsafe spills on engine or floor.
Transparent lower chamber displays oil flow.
Pliers allow self adjustment to the oil filler neck for univers

8pc Oil Funnel and Adaptor Set
For fast oil filling without spillage.
Great for many late model vehicles with internal baffles.
2 litre funnel with 6 adaptors to fit a wide range of vehicles.
Plus Offset Extension Tube with swivel feature for hard to reach places.

8pc Engine Oil Filler Set
For fast oil filling without spillage.
Great for many late model vehicles with internal baffles.
2 litre funnel with 6 adaptors to fit a wide range of vehicles.
Plus Offset Extension Tube with swivel feature for hard to reach places

24 piece Engine Oil Filler Set with Rotation Handle
Allows for fast oil filling without spillage.
Great for many late model vehicles with internal baffles.
2 litre funnel fits adaptor for wide application range.
Colour coded plastic adaptors for oil filler access.
Special angle extension with swivel feature for hard to reach places.
Contains 19 specific adaptors for leakage-free connection.

Oil Funnel Adaptor
For fast, easy and clean filling of engine oil
on Renault / Opel / Dacia vehicles.
OEM Codes :
Mercedes : 607 018 02 00
Nissan : 0161100QAD
Renault : 1114-00116R | 82 00 722 794
Can be used with Neilsen funnels - CT4531 / CT4654 / CT4950

Oil Funnel Adaptor
For fast | easy and clean filling of engine oil
on Volvo / Renault / Opel / Nissan 1.9DTI / 1.9DCI vehicle.
OEM Codes :
31303728 | 82001385 | 82 00 901 425 | 82 00 807 608
82 00 059 541 | 77 01 048 222 | 77 01 047 282
77 01 047 280 | 77 00 115 638 | 77 00 115 564
Can be used with Neilsen Kits - CT4531 / CT4654 / CT4950

Oil Funnel Adaptor
For fast, easy and clean filling of engine oil
on Dacia / Mercedes / Nissan / Opel / Renault vehicles.
OEM Codes :
Mercedes : 6070180200
Nissan : 0161100QAD
Renault : 1114-00116R | 8200722794
Can be used with Neilsen funnels - CT4531 / CT4654 / CT4950

Oil Funnel Adaptor
For fast, easy and clean filling of engine oil
on Mercedes M256 | OM654 | OM656 Engines.
Can be used with Neilsen funnels - CT4531 / CT4654 / CT4950

250mm Oil Drum Funnel with Filter
Filters oil and drains direct into oil drum.
Suitable for draining waste oil or draining unused oil into the drum.
Material : PP
Max Diameter : 250mm
OA Height : 210mm
With 2in. BSP / DIN 61 adaptor for most oil drums.

2pc Oil Drain Splash Pad - 15in. Diameter
Protects floors and work area from messy oil splatter,
Porous material allows fluid to quickly pass through into funnel or pan.
Pad material resists engine oil, transmission fluid, coolant, brake fluid,
brake cleaner, gear oil and other solvents.
Fits all standard oil lift drain funnels and oil pans or can be trimmed to fit.
Important : Not for coolants or fluids that will be recycled in the vehicle.
Material fibres may contaminate the fluid.

2.5L Oil Wheel Pan for Trucks and Trailers
Catches oil from wheel hubs after removing cap.
Prevents oil mess during wheel repair.
The pan fits rims with 13-3/4in. Inner diameters.
Handle compartments hold hub nuts.
Made of Polypropylene for durability.

Oil Drain Pan - 2 litre for Motorcycles

Drip Tray
940 x 630 x 30mm
Manufactured from 1mm plastic
Ideal when transferring fluids to avoid workshop floor contamination.
Also protect your drive or garage floor from oil and antifreeze spillage
which can be harmful to pets.

Stainless Steel Drip Tray
600 x 400mm / 48mm deep.

42L Oil Drain Pan
Robust Large Capacity White Plastic Tray
Features lowered corner for easy pouring.
Dimensions : 830 x 550 x 90mm

42L Oil Drain Pan
Robust Large Capacity Black Plastic Tray
Features lowered corner for easy pouring.
Dimensions : 830 x 550 x 90mm

5L Oil Drip Pan br> For collecting and transferring liquids.
Litre scale in the tub
Practical holder for oil filter cartridges
With pouring lip for clean disposal of fluids.
Polypropylene construction.
Dimensions : 370 x 90mm

6.5L Oil Drip Pan
Universally applicable
With sturdy carrying handles
Safe pouring due to all-round overflow rim and pouring spout.
Polypropylene construction.
Dimensions : 395 x 380 x 115mm
Lye and acid resistant

8L Oil Drain Pan
Easy to clean durable plastic construction
with 8 Litre capacity ideal for antifreeze and oil.
Wide pan with pouring lip for clean disposal of fluids
plus shallow sides to allow easy positioning under vehicle.
Suitable for DIY use or the professional garage mechanic.

8L Oil Drain Pan with Nozzle
Ideal for the Professional and Enthusiast Mechanic

16 litre Oil Drain Pan
Ideal for the Professional and Enthusiast Mechanic

10 litre Fluid Draining Tank
for Oil or Water
For professional mechanics or the DIY the user.
Concave drain surface and large spout with
secure screw cap prevents any loss while transporting fluids.
Strong durable plastic with moulded handles top and bottom.

58 Litre Oil Drain Pan
with 2 Heavy Duty Wheels
makes waste oil collection simple and efficient.
With valve at the bottom for quick and easy emptying.
Wheels allow for smooth and easy movement around the workspace.
4 large handles makes it easier to carry and discard the oil.

2-in-1 Oil Drain Pan & Tool Caddy
Combined 8 litre oil drain pan and mobile tool caddy.
Use when changing oil or alternatively to keep tools organized while under car.
With splash guard to hold drain plug.
Drain pan capacity : 8L
Load capacity : 22.5Kg

12V Oil Exchange and Flushing Machine with Adaptor Set
For removing and exchanging automatic transmission oil.
Also for cleaning / flushing oil cooler and oil lines.
Pump Output : 70W
Oil Pressure Gauge Diameter : 70mm
Oil Pressure Display Range : 0 - 150psi / 0 - 10bar
Fresh and Used Oil Tank Capacity : 25 litre
Red and Black Hose : 2.5M x 12.5mm Diameter
All hoses with quick couplings / plug and socket
Max. Hose Pressure : 300psi / 20 bar

24 Litre Pneumatic Oil Extractor
Degree of Vacuum : 0 - -0.08mpa
Working Pressure : 8 - 10bar
Working Oil Temperature : 40 - 60 degrees C
Suction Speed -
0.8L/min - Hose diameter : 3.5mm
1.0L/min - Hose diameter : 4.5mm
1.6L/min - Hose diameter : 6.5mm
Designed to extract waste oil and fluids.

Pneumatic Waste Oil Extractor
for engine oil and gear oil.
Tank capacity : 80L
Degree of vacuum : 0 - 0.8bar
Operating air pressure : 8 - 10bar
Volume of oil collecting pan : 10L
Dipstick probes : 6 x 4.5mm | 8 x 6.5mm
Draining and Suction Hoses : 1.5m
Operating temperature : 60 - 100 degrees C

500cc Oil Suction Gun
Oil Extractor Pump
Removes and replaces any non-corrosive liquid.
Perfect for Transmissions / Differentials / Gear Cases / Crankcases.
No priming necessary.
Knurled thick wall barrel for secure grip.
12in. / 300mm Flexible Hose.

500cc Suction Gun
Fluid Extractor Pump
Suitable for Antifreeze, Gearbox and Engine Oil etc.
Features an outlet valve and an inlet valve for easy transfer in one pump.
Overall length : 330mm / without hose
Hose Length : 1.2M
Hose outer diameter : 12.5mm
Hose inner diameter : 9.5mm

See-Through Suction Gun
Ideal for transmissions / differentials and gearboxes.
Transparent barrel to easily view fluids to inspect and control flow.
For use with any non-corrosive liquids.
Flexible hose for hard-to-reach areas.
Capacity : 550ml
Hose Length: 300mm
Hose Diameter : 13mm External
Hose Diameter : 10mm Internal

Transmission Oil Hand Pump
7L Reservoir with 15 Adaptors
Suitable for Manual and Automatic Transmissions.
Viscosity range : SAE0 to SAE140
Capacity : 80cc per cycle
Includes 15 adaptors for :
BMW / Ford / Honda / Hyundai / Kia / Mercedes / Mini / Nissan / Toyota / VAG / Volvo Vehicles

Grease or Hydraulic Oil Hose Reel
50ft - 3/8in. High pressure : 2250psi
High tensile steel wire braid Reinforcement
Steel construction for long life in industrial and automotive industries
2 supporting arms and galvanized base
4 direction non-snag rollers reduce hose abrasion
Wall / ceiling or floor mount
Hose material - S.A.E 100R1AT
Temperature : 40 - 100 degrees C

Audi A6 Automatic Transmission Oil Dipstick
Applicable to Audi A6 / 100 models without dipstick
4A | C4 / 1990 - 1994
44 | 44Q | C3 / 1982 - 1990
43 | C2 / 1976 - 1982
C1 / 1970 - 1976