Universal Radiator Pressure Tester & Vacuum-Type Cooling System Kit
Adjustable radiator test adaptor suits most vehicles.
Tests for leaks and allows quick change of coolant in vacuum systems.
40 - 75mm vacuum purge and refill tool connection
fits nearly all types of radiators

32pc Radiator Pressure and Cooling System Tester
For pressure testing radiators on most popular vehicles.
Will also pressure test radiator caps for leakage.
30 Colour Coded Adaptors -
allow direct connection to radiator or expansion tank.
Hand pump with gauge graduated with BAR and PSI
for easy controlled pressurization via a quick coupling system.
With Pressure release pin.

Radiator Pressure and Cooling System Test Kit
Universal test for leakage in radiators and coolant systems.
Colour coded caps | Vacuum purge and refill tool
Pressure testing range 0 - 35 psi / 0 - 2.5 bar
17 test caps for testing cooling systems on most vehicles

14pc Radiator Pressure Test Kit
Universal for Most Vehicles
Pressure Testing Pump with Gauge
Temperature Testing

Cooling System Vacuum Purge / Refill Kit
Supplied with three adaptors.
Air Pressure : 90 psi.
Air Consumption : 12cfm.
Fluid Hose Length : 900mm.
Air Inlet Size : 1/4 BSP.

Radiator Vacuum Purge and Refill Kit
Refill entire cooling system quickly
Radiator Adaptor for use with most vehicles
Coolant Hoses

Water Pump Tester Kit
For testing cooling system water pumps in situ while the engine is running.
Indicates the coolant flow by measuring pressure rises
that occur due to the coolant flowing around the block.
Gauge : 0 - 15psi
Rubber Pipe Seals and Blanking Plugs
2 part Pipe Connector Body
2M Nylon Hose and Male Connector

VAG Radiator Cap
No.23 for Audi / Porsche / Skoda / Seat / VW

Coolant Pressure Test Cap
for Ford and Volvo Vehicles
Applicable to : Ford / Updated Type
Volvo : V70 / XC70
Use with Radiator Pressure Test Kits :
CT1585 | CT3380 | CT3923 | CT5665

Coolant Pressure Test Cap
for Vaxhall and Opel Vehicles - Updated Type
Use with Radiator Pressure Test Kits :
CT1585 | CT3380 | CT3923 | CT5665

Radiator Adapter Connector
90 Degree

Spill-Free Funnel with Accessories
Controls the proper amount of coolant entering system
and enables unattended filling of the cooling system.
The clear funnel allows a visual check of the coolant from a distance.
Comes with a lid to keep contaminants out and
provide storage for the caps and adapters when not in use.
2 x 45 degree Elbows.
5in. Extension.
Caps and Adapters.
Funnel plus Lid.

Digital Thermometer
105mm Stainless Steel Probe
Switch between Celsius and Fahrenheit
Temperature Range : -50 C to +300 C / -58 F to +572 F
Temperature Steps : 0.1 C / 0.2 F
Power : 1.5V Battery - included
Auto power off after 15 minutes
Overall Size : 180mm x 21mm

Handheld Infrared Thermometer
Precise non-contact measurement
8:1 Optical resolution
Response Time : 500ms
F or C selectable scales
Weight : 5oz /135g
9V Battery included

Air Flush Gun for Cooling Systems
Step adaptor for different hose diameters.
For use with air and water to clean most systems.
Trigger handle to control flushing and simulate pulsing force.
5 Adaptor sizes : 19 | 29 | 32 | 36.5 | 40mm
Operation pressure : 90psi

Coolant Fluid Exchange Machine
Pneumatically powered - no electricity required.
Efficient and easy to use equipment.
Working pressure : 5 - 8 bar.
Maximum vacuum degree : -20InHg.
Vacuum Degree : -0.1 - 0 bar
Liquid Discharge Pressure : 0 - 0.5 bar
Used and new fluid tank capacity : 15L
Length of return / out hose : 2.7M
Vacuum Coolant change can be performed in a few minutes

Engine Cooling System Cleaning Machine
Cycle Cleaning with Equal Volume Change
Rated Voltage : DC12V
Rated Frequency : 50 / 60Hz
Pressure Gauge Range : 0 - 150psi
Outlet Pipe Length : 2.5M
Relative Humidity : approx. 85 percent
Tank Capacity : 25Lx2