Balance Shaft Puller with Slide Hammer
For VAG 1.8L | 2.0L 4 cylinder petrol chain driven injection engines.
Audi - 2007 to 2017
Seat - 2006 to 2017
Skoda - 2007 to 2017
Volkswagen - 2007 to 2017
OEM Code : T10394

46pc Harmonic Balance Puller Set
Removes Harmonic Balancers / Gear Pulleys
Steering Wheels and Crank Shaft Pulleys
Zinc Plated Yoke and Bolts
5in. Pressure Screw
Small Cantering Adaptor
Large Cantering Adaptor
Flat Shaft Adaptor

Oil Pump / Balance Shaft Alignment Kit
for BMW 1 | 2 | 3 | 4 Series - 6L / 2.0L Petrol Engines.
For fixing the balance shaft and holding the chain sprocket
when used for repairing the chain and sprocket wheel drive.
Applicable to Engine Codes : N20 | N26 2012 - 2017
OEM Codes : 2 212 825 | 2 318 117 | 11 4 120

Balance Shaft Alignment Tool Set
for BMW - B47 / B48 / N47 Engines
Designed to lock the balance shafts
in the correct timed position during engine rebuild.
Applicable to :
Series - 1 | 2 | 3 | 4 | 5
X1 | X3 | X4 | X5
Mini Clubman and Hatch

OEM Codes : 2288054
118750 | 118790 | 118791 | 118792 | 118793

Balancer Shaft Removal / Alignment Kit
for BMW B37 Diesel Engines | B38 Petrol Engines
Applicable to :
BMW 1 / 3 Series 2015 to 2017
BMW 2 Series 2014 to 2017
BMW X1 2015 to 2017
BMW i8 2015 to 2017
Mini Clubman 2015 to 2017
Mini Convertible 2016 to 2017
OEM Codes : 2288943 | 2288942 | 2358646

Balance Shaft Tool Set
For adjusting the balance shaft on the following vehicles :
JLR : ED4 | TD4 | TD4E / 2009 - 2015.
Citroen : C5 | C5 II | C5 III | C6 | C8 | C-Crosse Hdi / 2000 - 2015.
Mitsubishi Outlander : DI-D | DI-OC / 2007 - 2013.
Peugeot : 4007 | 407 | 607 | 807 | 406 | 508 | 607 | Hdi | GT Hdi / 2000 - 2015.
Ford : Galaxy | Mondeo | S-Max | TDCI | TCI / 2018 - 2015.

BMW Crankshaft Harmonic Balance Tool
for BMW 3 & 5 Series.
Engines : E39 | E46 | E60 | E61 | E81 | E83 | E90 | E91
Holds vibration damper when loosening and tightening centre crankshaft bolt.

Harmonic Damper Holding Tool - Honda
1/2in.Dr 50mm offset socket
For maintaining the harmonic damper pulley position
while removing / installing the pulley bolt.
Use with a 1/2in.Dr Ratchet or Power Bar.

Crankshaft Harmonic Balancer Holding Tool
for Mercedes 1.6 | 1.8 from 2002 to 2018
Designed to securely hold the Harmonic Balancer / crankshaft pulley
while undoing or tightening the crankshaft pulley fixing bolts
in Mercedes 1.6 and 1.8L petrol engines on -
C / CLC / E / CLS / SLK / CLK Class / Sprinter.
OEM Code : 271589004000.

Harmonic Damper Pulley Puller
for Chrysler / GM / Hyundai and Mazda
3-Jaw Puller with 3 Lengths of Forcing Rods.
Puller separates the harmonic balancer from the crankshaft.
With harmonic balancer holding tool for tightening or loosening
the crankshaft bolt or removing the balancer.

Crankshaft and Camshaft Seal Remover and Installation Kit
Includes 2 Seal removers for multiple applications
Angled blades for removing seals in limited access

Crankshaft Seal Remover / Installer Kit
Seal sizes - 27mm and 58mm in diameter.
Universal covering a wide range of vehicles.
Use the existing bolt in the vehicle for installation.
Screw-type adapter to aid cantering the seal.
With Aluminium Blue Seal Adapters to prevent crank damage.

7pc Crank / Camshaft Radial Seal Ring Extractor Set
for VAG Petrol Engines : Lupo and Polo 1.4 | VR6 | Audi V6
Short Extractors : 25 | 32 | 35 | 27| 55mm Diameter
Long Extractor : 32mm Diameter
Pilot Pin Socket :19mm Hex x 60mm-L x P1.25
For removing rotary shaft seals and radial sealing rings.
Grips the seal from the inside with its conical profile
Suitable for most commercially available sealing rings.

Front Main Crankshaft Oil Seal Installer - Isuzu 3.5T
For the correct fitment of the front crankshaft oil seal
on 3.5 tonne Isuzu Truck Diesel Engines
to prevent the oil seal from damage on installation.
Vehicle applications :
N-Series trucks | D-Max and Trooper.
Engine : 4JG2 | 4JH1 - 110HP / 130HP
OEM Code seal numbers : BZ 4961E

Rear Main Crankshaft Oil Seal Installer
for Isuzu 3.5 Tonne Trucks
For correctly fitting the rear crankshaft oil seals
preventing the oil seal from damage when installing.
130 to 140 HP Engines : N-Series Trucks | D-Max | Trooper.
4JK1 / 2.5 | 4JB1 / 2.8L | 41JG1 / 3.1L | 4JH1 / 3.0L
OEM Codes : EN-50351 | 5-8840-2359-0.
Seals OEM : BZ4962-E | 8-97071-561-1

BMW Front Crankshaft Seal Installer
for BMW B47 | B48 | B57 | B58 Engines
Applicable to : Series 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 / 2014 - 2021
X3 | X4 | X5 | X6 | X7 | Z4 / 2014 - 2021
Petrol : 2.0L / 1.6L / 3.0L | Diesel : 2.0L / 3.0L
OEM Code : 118801 / 2 / 3 / 4

BMW Front Crankshaft Seal Installer
For removing or installing the front crankshaft oil seal on BMW model engines :
N40 | N42 | N45 | N45T | N46 | N46T | N52 | N53 | N54
BMW model engines.
OEM Codes : 119230 | 119231 | 119233 | 119235 | 2212822

BMW Crankshaft Oil Seal Kit
For removal and installation of the rear crankshaft oil seal.
Applicable to :
N40 | N42 | N45 | N45T | N46 | N46T | N52 | N53 | N54.
OEM Code : 2212827

BMW Crankshaft Seal Tool Set
For removing and installing the front and rear crankshaft seal.
Applicable to :
N20 / N26 / N40 / N42 / N45 / N45T
N46 / N46T / N52 / N53 / N54 / N55
OEM Codes :
110370 | 119181 | 119182 | 119183

BMW Front Crankshaft Timing Case Cover Remover / Installer
For correcting alignment of the front crankshaft timing case cover / at bottom
also helps prevent damage to the new seal during fitting.
Applicable to : BMW 1 | 2 | 3 | 4 Series - X1 | X2
Mini Clubman / Hatch / Countryman.

Mercedes Crankshaft Oil Seal Installation Kit
Used to install the front and rear crankshaft oil seal.
Applicable to:
M102 | 111 | 112 | 113 | 137 | 156 | 159 | 272 | 275 |
285 | 601 | 602 | 603 | 604 | 605 | 606 | 628 | 629.
OEM Codes :119589011400 | 11589084300

Mercedes Crankshaft Oil Seal Installation Kit
Specifically designed to install crankshaft front and rear seals
on Mercedes M651 diesel engines .
OEM Codes : 651589006100 | 651589016100

Ford Crankshaft Front Oil Seal Installer
for 1.0 / 1.1 Ti-VCT Ecoboost Engines
Quick and easy locating of crankshaft seal to the housing.
Enables accurate installing of the seal to the correct depth.
No damage to the seal and engine housing.
OEM Codes : 303-1603 | 303-1636.

3 Jaw Pilot Bearing Puller
Suitable for sleeve-type bearings : 16 - 50.8mm diameter.
Ideal for flywheel bearings / pump bearings and generator / starter bearings without tilting the bearings or damaging the bearing race.
For servicing motor vehicles / motorcycles and lawn mowers etc.

VAG Vibration Damper Assembly Tool
Specially designed to fix the timing chain drive sprockets
while installing and removing the vibration damper on
VAG 1.8L / 2.0L TFSi / TSi EA888 engine.
Applicable to Audi / Seat / Skoda / Volkswagen
Vibration damper holding tool.
Crankshaft sprocket holding tool / adapter and nut.

Vibration Damper Puller Removal Tool
For separating the vibration damper from
the gear wheel of the crankshaft.
Suitable for 2.0TDi Bi-Turbo engines on
Volkswagen Transporters T6 from 2017.
4 Cylinder Common Rail 2.0L Engines : CXEB | CXEC
OEM Code : T50071.
Allows damage-free removal of the vibration damper
with internal Thread : M22 x 1.5mm.

Universal Flywheel Turning Tool
For turning and holding Flywheels and Flexplates.
Easily turn engine from underneath the vehicle.
Great for working on clutches / transmissions or installing rings
and other jobs that require the crankshaft to be in a certain position.

BMW / Mini Crankshaft Turning / Holding Kit
Specially designed to rotate the crankshaft and fix the flywheel.
Crankshaft Pulley Turning Tool
Flywheel Drive Plate Holding Tool
Securing Bolt and Spacer
Flywheel Bolt Socket

BMW Flywheel Locking Tool
for BMW / MINI engines -
N40 to N73 | M47TU | M54 | M57T2/TU | S85 | W17.
With Counter Holder / Spacer Sleeves /
Reduction Sleeve and Mounting Screws.
For locking the flywheel when loosening or
tightening the pulley and the flywheel itself.

Ford Flywheel Locking Tool
For loosening and tightening the flywheel and crankshaft pulley
With Base Plate and 3 pawls : 11mm | 29.5mm | 41.2mm.
Suitable for a wide range of Ford Engines up to 2017.
OEM Codes : 21-168
303-1272 | 303-393 | 303-393-01 | 303-393-02

Timing Tool Set
For Camshaft / Crankshaft and Flywheel Locking.
Allows inspection and adjustment of engine timing
on Ford / Peugeot / Rover / Volvo - 2.0 | 2.2LD vehicles.

BMW Flywheel Tool Set
For Diesel and Petrol chain drive engines.
Found on most BMW K | M | N models
The tool can also be used to hold the flywheel when
removing the timing chain for cylinder head work.

JLR Balance Shaft Service Kit
for Jaguar / Land Rover 2.0L Diesel Engines
Designed for the removal / refitting and setting of the balance shafts
on the Jaguar Land Rover AJ200 2.0L Diesel Engines.
Applicable to:
Jaguar E-Pace / F-Pace / XE / XF
Land Rover Discovery / Sport
Range Rover Evoque / Sport / Velar

Mercedes Flywheel Locking Tool
for Mercedes-Benz - A / B Class and CLA / GLA
Designed to fit in place of the starter motor to lock the crankshaft
via the flywheel ring gear on the Mercedes-Benz engines.
Applicable to :
A class / 2013 - 2019 | B class / 2012 - 2019
CLA / 2013 - 2019 | GLA / 2014 - 2020

Mercedes Flywheel Retaining Tool
for Mercedes-Benz 1.8 | 2.1 M651 Diesel Engines.
Bolts in place of the starter motor to lock the flywheel
to prevent it turning when removing the crankshaft front pulley fixings
Applicable to : A / B / C / CLA / E / GLA / GLK / V Class - 2008
Also light commercials vehicles - Sprinter / Viano and Vito
OEM Code : 651589024000

Flywheel Locking Tool
for Mercedes / Renault / Dacia - 0.9L | 1.3L | 1.6L Petrol Engines
For locking the flywheel to allow easy removal
of the crankshaft pulley and flywheel bolts.
Applicable to : Mercedes-Benz A / B class / CLA / GLA / GLB.
Renault Arkan / Clio V / Captur / Kadar / Megane and Talisman.
Dacia Dokker / Duster and Lodgy

41mm Water Pump Wrench - 1/2in.Dr
For use on older GM - Vauxhall / Opel engines
where the water pump is used to adjust the camshaft belt tension.
Also used on Chevrolet / Daewoo vehicles.
Engines : 1.2 / 1.3 / 1.4 / 1.6V / 1.6D / 1.8
OEM Codes : KM421A | J-42492 | J-42492-A

46mm Water Pump Wrench - 1/2in.Dr
For use on older Vauxhall / Opel engines
where the water pump is used to adjust the camshaft belt tension.
Engines : 1.6 ( 87 ) 1.7D / 1.8 ( 87 ) / 2.0 litre
OEM Code : KM409A

Flywheel & Front Pulley Locking Tool Set
for 1.4 | 1.6 | 2.0 | 2.5 | 3.5 CD Petrol Engines
on Renault / Nissan vehicles.
Also for flywheel locking on M9R / 2.0 Diesel
and M9T / 2.3 Diesel Engines.
Engine Codes :
H4JT | M5M | MR4 | 2TR | V4Y

VAG Crankshaft Locking Pin - M14 x 1.5
for locking the crankshaft in TDC position
while Replacing the timing belt on
Audi A6 2005 models with 6 cylinder 2.4 / 3.2 FSI engines
OEM Code : T40069

VAG Crankshaft Turning Adaptor
22mm Square with 12mm Rotating Pivot Pin
Dual Drive : 1/2in.Dr plus 24mm Hex
Used for turning the crankshaft pulley.
Applicable to : 2.4 | 3.2 | 4.2 FSI Engines.
OEM Code : T40058

VAG Crankshaft Locking Tool Set
Suitable for VW Touareg 2003 >
Phaeton 2003 > with 10 cylinder Diesel Engines.
For locking crankshaft when adjusting engine timing.
Adjusting bolts for mounting the engine control module

OEM Codes : T10195 | T10200

VAG Crankshaft Seal Flange Remover and Installer
for 1.4 and 1.6 - 16 Valve VAG engines
fitted to Audi / Skoda / Fiat and VW vehicles
Specific tool vital to ensure the correct alignment
of the main seal house crankshaft sensor.
The Seal housing carries the crankshaft sensor mounting.
OEM Code : T10017

VAG Crankshaft Seal Flange Installation Tool
Designed to renew the crankshaft oil seal on Audi / VW vehicles
Applicable to 16V / 20V - 1.9 / 2.0 Diesel Engines since 2006.
For 4 Valve Diesel engines with integrated sender wheel.
Audi A3 4-cyl. VW Golf / Touran
OEM Code : T10134

VAG Crankshaft Oil Seal Tool
Designed for VW 2.5 TDI | 2.5 Blue TDI Engines.
The flywheel end oil seal is integral with the oil seal housing
and speed sender and is supplied with a new timing ring.
If the oil seal is faulty then the whole assembly must be renewed.
Suitable for VW Crafter 2.5L / 2006 - 2013
Engine Codes : BJJ | BJK | BJL | BJM | CEBA | CEBB | CECA | CECB
OEM Code : T50010

VAG Camshaft Pulley Holding Tool Set
For holding the pulleys and sprockets on the
camshaft / crankshaft / oil pump and water pump
while loosening and tightening the fixing bolts.
also suitable for the Common-Rail Diesel Pump-Nozzles
Suitable for Audi | Seat | Skoda | Volkswagen models.

Ford A/C Compressor Clutch Pulley Retaining Tool
3/8in.Dr - Required when changing the A/C pump or pulley.
Applications : Ford vehicles 2010 - 2015
C-Max / B-Max / Ecosport / Edge / Fiesta / Focus
Galaxy / Kuga / S-Max / Transit Courier
OEM Code : 412-134

Ford A/C Compressor Clutch Pulley Retaining Tool
3/8in.Dr - Required when changing the A/C pump or pulley
Holds the compressor pulley still allowing the fixing bolt to be removed.
Ford vehicles from 2012 -
Transit and Transit Custom Hybrid PHEV.
OEM Code : 412-157

Ford A/C Compressor Clutch Pulley Retaining Tool
3/8in.Dr - Required when changing the A/C pump or pulley.
Holds the compressor pulley still allowing the fixing bolt to be removed.
Ford vehicles 2010 - 2017
C-Max / Focus / Kuga / Transit Connect / Courier / Ka / Fiesta.
OEM Code : 412-154

Ford A/C Compressor Clutch Pulley Retaining Tool
3/8in.Dr - Required when changing the A/C pump or pulley
Holds the compressor pulley still allowing the fixing bolt to be removed.
Ford vehicles from 2008 - 2015
Fiesta / from 2008
B-Max / from 2012
C-Max / from 2010 & 2015
OEM Code : 412-103