30in. / 760mm Bolt Cropper
Chrome-Molybdenum Adjustable Steel Jaws
Cuts rods, bolts, rivets, bar and chain.
Hardened cutting edge -
increases cutting performance and durability.
Compound cutting action requires less effort.
Tubular Steel Handles with cushioned non-slip
Rubber Grips allows maximum leverage.

36in. / 915mm Bolt Cropper
Chrome-Molybdenum Adjustable Steel Jaws
Cuts rods, bolts, rivets, bar and chain.
Hardened cutting edge -
increases cutting performance and durability.
Compound cutting action requires less effort.
Tubular Steel Handles with cushioned non-slip
Rubber Grips allows maximum leverage.

Universal Lock-out Tool Set
For Professional Use Only
Thin Bar
NOTE - This set is sold on the provision that it is used Lawfully

Steering Wheel Puller
2 Leg Puller - 115 / 164mm long
with Yoke / Thrust Bolt and 2 Thrust Caps
Spread 38 - 85mm
For use on Ford and GM - Vauxhall / Opel vehicles

Professional Soldering Set
Anti-flare works at any angle and wind resistant.
7 functions with multiple accessories.
Built-in stand for safe operation.
Gas Capacity : 5ml
Temperature Soldering Tip : 350 degrees C
Temperature Hot Blow Tip : 650 degrees C
Temperature Blow Torch Tip : 1150 degrees C
For Soldering / Heating / Heat Shrinking and Paint removal

Cordless Handheld Heat Gun / Butane Gas
3 Second charge delivers up to 50 - 60 minutes operating time.
5 Nozzle Positions : 0 / 22.5 / 45 / 67.5 / 90 degrees
3 Heads : Reflect Nozzle | Concentrate Nozzle | Flat Nozzle.
Gas capacity : 20g
Max. temperature : 500 - 600 degrees C
For Loosening rusted material / Burning wood with different finishes
Re-melting adhesives / Bending plastic sheet or pipe
removing paint and shrink wrapping.
Turbo Flame - 1300 degrees C / 2450 degrees F

Heavy Duty Soldering Clamp
with 90mm Magnifying Glass
An Indispensable aid for hobbyists or professionals doing soldering work
Features adjustable joints for versatile movement in all directions
Strong crocodile clips that hold work secure
Heavy cast iron base for added stability
Distortion free magnifying glass

LED Headlight
Max. Lumen : 250LM
Battery : 500mAh / Rechargeable
Charging time : 2 Hours
Working time : 2.5 Hours
With a USB C charging cable
Waterproof rubber switch
Modes : white light / warm light / flash
Waterproof rating : IP4

LED Head Torch
Max. Output : 220LM
Rotation Focusing with 90 degree Adjustment.
Rear LED Warning Light.
Waterproof Rubber Switch
Modes : High / Low / Flash / SOS
Rechargeable Batteries : 2 x 18650
4 hours charging with approx. 3.5 hours work time.
Supplied USB Charging Cable

Rechargeable LED Work Light and Torch
Bulb : SMD + COB
Battery : 3.7V | 1200mAh
Charging Time : 2.5hrs
Switch Functions : COB Low / High | SMD | Off
Light Output : 50LM | 200LM | 50LM
Charging Port : Type-C
Adaptor : DC 5V / 1A
Charging Indicator : 4 Power indicators
Ideal for automotive inspection and various other tasks

LED Handheld Work Light
Bulb : COB LED
Battery :3.7V 1800mAh Li-ion Battery with USB Charge
Function : Full Power / Half Power / Flash / OFF
Max Output : Full - 360 Lumens / Half - 180 Lumens
Run Time : 3hrs / 8hrs
Magnetic Back with Integral Hook
Waterproof : IPX4

Cordless LED Work Light
30 LEDs producing 200Lm
Integral Battery : 2Ah Li-ion
Charger : 100 - 230V
Magnetic Base and Hook

Rotating Magnetic LED Work Light
Strong ABS Housing and Aluminium Light Strip rotates up to 270 degrees.
With Swivel Magnetic Arms and Hanging Hooks.
Light Settings : High - 750Lm | Low - 375Lm / off
Run Time : 2.5 hours / high power | 5 hours / low power.
Battery : 3.7V / 4000mAh Li-ion.
Charging time : 5 - 6 hours.
Overcharge and overcharge protection.

Wireless Trailer Light Kit
Rechargeable cable free trailer lights with magnetic base.
Includes Brake / Tail and Number Plate Lights with Indicator.
Input Voltage : 12V DC
Charging Voltage : 5V DC
Battery Capacity : 2600MAH
Charging Time : 2.5 hours / approx.
Discharging time : 8 hours / approx.
Waterproof level : IP67
Universal for most vehicles and Trailers.

Twin LED Work Light with Telescopic Stand
230V / 50Hz | 60Hz
20W / 1800 lumen / 6500k
Flood with 120 degree spread
Max. Stand Height : 1950mm
IP65

5M Extension Lead
with 230V Single Socket
Current : 13A
IP20 - Suitable for Indoor Use.

230V Cable Reel - 25M
13 Amp UK 3 Pin Plug with 2 Sockets
Rubber Grip Handle with flexible easy wind cable.

230V Cable Reel - 50M
13 Amp UK 3 Pin Plug with 2 Sockets
Rubber Grip Handle with flexible easy wind cable.
Fully-reeled : 1000W
Fully-extended : 3120W
Ideal for workshop or home use.
Cable : A05VV-F 3G1.25m2

Trailing Socket Lead
with 16A Plug to 230V UK Socket

15HP Petrol Generator
Displacement : 420cc
Single Cylinder, 4 Stroke, Air Cooled
Starting System : Recoil / Electric
Electric Start with 12V / 17AH battery
Rated Output : 5.0kW
Max. Output : 5.5kW
Rated Voltage : 230V / 115V
Frequency : 50Hz
DC Output : 12V / 8.3A

8KW Silent Diesel Generator - Single Phase
Rated / Max. Power : 8KW / 8.5KW
Rated Voltage : 230V
Rated Frequency : 50Hz
Rated Current : 34.7A
DC Output : 12V / 8.3A
Power Factor : 1.0
Displacement : 667cc
Fuel Tank Capacity : 28L
Rated Class : IP23M

8KW Silent Diesel Generator 3 Phase
Rated / Max. Power : 8KW / 8.5KW
Rated / Voltage : 230V / 400V
Rated Frequency : 50Hz
Rated current : 8.5 / 11.5A
DC Output : 12V / 8.3A
Power Factor : 0.8
Displacement : 667cc
Fuel Tank Capacity : 28L
Rated class : IP23

10Hp Diesel Generator / 3 Phase
Rated / Max. Power : 4.5Kw / 5Kw
AC Output : 400V / 230V / 50Hz
DC Output : 12V / 8.3A
Power Factor : 0.8 cosf
Displacement : 406cc
Fuel Tank Capacity : 16L
Net / Gross Weight : 148kg / 159.5kg
Measurements : 94.5 x 55 x 70cm

10Hp Diesel Generator / Single Phase
Rated / Max. Power : 4.5Kw / 5Kw
AC Output : 115V / 230V / 50Hz
DC Output : 12V / 8.3A
Power Factor : 1.0 cosf
Displacement : 406cc
Fuel Tank Capacity : 16L
Net / Gross Weight : 148kg / 159.5kg
Measurements : 94.5 x 55 x 70cm

Bench Drill / Drill Press
Motor : 230V / 350W / 50Hz?
5 Speed?Spindle
Motor No-load Speed : 1400rpm?
Chuck Capacity : 1.5 - 13mm
Max. Drilling Depth : 50mm?
Table Size : 160 x 160mm?
Table Tilting Range : 0 - 45 degrees
Overall Height : 580mm

Bench Drill / Drill Press
Motor : 230V / 550W / 50Hz
Spindle Speed : 16 speed
Motor No-load Speed : 1420rpm
Chuck : B16 / 3 - 16mm
Spindle Taper : MT2
Max. Drilling Depth : 80mm
Table Size : 290mm
Overall Height : 980mm

3pc Spot Weld Cutter Set
6.5mm | 8mm | 10mm
1/4in. | 5/16in. | 3/8in.
High Speed Titanium Coated Cobalt Bits
Prevents Bit Dulling from Overheating.
Length : 45mm
Flat Shaft for Sure Grip
Special Centring Nib to avoid slipping.

HSS Step Drill
Sizes : 4 | 6 | 9 | 12 | 15 | 18 | 21 | 24 | 27 | 30 | 33 | 36 | 39 | 42mm
Ideal for cutting holes in metal and other materials.

HSS Step Drill
Sizes : 6 | 8.5 | 10.5 | 12.5 | 16.5 | 20.5 | 25.5 | 29 | 32.5 | 36.5 | 40.5mm
HSS 4241

HSS Step Drill
Steps : 6 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | 60mm
Shank : 13mm
HSS 4241

10pc Flat Wood Drill Set
Sizes : 6 | 10 | 13 | 16 | 19 | 22 | 25 | 32mm.
Hex Shaft : 1/4in.
Length : 150mm
Extension Bar : 300mm
with Hex Key

13pc Flat Wood Drill Set
Sizes : 6 | 8 | 10 | 12 | 13 | 14 | 16 | 18 | 19 | 20 | 22 | 24 | 25mm
with 6mm Hex Shank

4pc Wood Auger Drill Set
Sizes : 8 | 12 | 16 | 24mm x 600mm long
Hexagonal Shank Fitting

SDS-Max to SDS-Plus Adapter for Rotary Hammers
Allows SDS-Plus bits to be used in a SDS-Max Tool.
For most Rotary and Demolition Hammers.
Heavy duty steel construction for long life time.
Length : 220mm

11pc Diamond Core Drill Set
Core drills : 38 | 52 | 65 | 117 | 127mm - Laser welded
With Hex and SDS-Plus Arbours.
1/2in. BSP 25mm Solid Extension.
13mm Taper Drill.
Guide Rod and Drift Key.
Angled slots extend through back end to expel dust.
Unique Helix barrel design draws dust down the barrel.
Working Depth : 140mm.

6pc Diamond Drill Set
Sizes : 6 | 8 | 10 | 20 | 28 | 35mm
Nickel plated
Suitable for drilling -
Ceramic / Glass / Marble / Slate and Porcelain Tiles

17pc Bi-Metal Hole Saw Kit
HSS 2mm thick high strength hard alloy steel blades.
with improved precision and cleaner / smoother cutting.
The chip removal groove on the side of the hole saw
rapidly discharges chips for easier clean-up.
Sizes : 20 | 2 | 25 | 29 | 35 | 40 | 44 | 51 | 57| 60 | 68mm
25/32 | 7/8 | 1 | 1-1/8 | 1-3/8 | 1-9/16 | 1-3/4 | 2 | 2-1/4 | 2-3/8 | 2-11/16 inch
Includes : 2 x Mandrels / 3 x Drill Bits / 1 x Hex Key
Perfect for cutting holes in metal, wood, PVC board, plastic and drywall.

Biscuit Jointer - 100mm
Power / Voltage : 900W / 230V / 50Hz
No load speed : 10800rpm
TCT Blade : 100mm Diameter with 6 Teeth
Max. Material Thickness : 0 - 30mm
For Biscuit Sizes : 0 | 10 | 20
Fine Depth Adjustment : 3 | 10 | 12.3 | 19mm
Fence Angle Setting : 0 - 90 / 90 - 135 degrees
With dust collection bag / hex key and spare carbon brush.

110V Angle Grinder - 115mm
Input Power : 750W
Frequency : 50 / 60Hz
No-load speed : 11000rpm
Disc diameter : 4.5in. / 115mm

4.5in. / 115mm Angle Grinder : 230V
Input Power : 850W
Frequency : 50Hz
No-load Speed : 11000rpm
Disc Diameter : 4.5in. / 115mm
Supplied in card box.

Tile Cutter - 600W
180mm Diameter Blade / 22.2 Bore / 2.2mm Thick
230V / 50Hz
Max Speed : 2990rpm
Table Size : 386 x 397mm
Max Cutting Depth : 34mm at 90 Degrees | 17mm at 45 Degrees.

180mm Continuous Rim Cutting Disc
2.2mm for Electric Tile Cutting Machines
Max - 80m/s
Max - 8500rpm
Bore - 23mm
Suitable for CT3097

20 Metal Cutting Discs - 115mm
For cutting only - not for side grinding
3.2 Thick
Bore : 22mm
Max 13300rpm 80m/s
NOTE : priced per pack

115mm Diamond Cutting Disc Set - 3pc
Continuous Rim / Segmented and Turbo Discs
Cutting Depth : 30mm
Bore size : 22.2mm
Speed : 13000rpm
General Purpose - EN13236

300mm Segmented Diamond Cutting Disc
Cutting Depth : 100mm
Bore size : 20mm
Max. Speed : 6300rpm
General Purpose - EN13236

350mm Laser Welded Diamond Cutting Disc
Cutting Depth : 120mm
Bore size : 25.4mm
Speed : 5400rpm
All Purpose

Electric Drill Bit Sharpener
Sizes : 3 - 10mm
230V / 50Hz / 70W
No Load Speed - 3000rpm
For Carbon Steel and HSS drill bits.
Provides a razor sharp cutting edge.
Drill guide ensures correct sharpening

Electric Chain Sharpener for Chainsaws
230V / 130W / 50Hz
No-load Speed : 3000rpm
100mm Diameter Grinding Disc.
Chain vice adjusts to any pitch and shape.
Suitable for wall or bench mounting.
Heavy duty steel base with safety guard.

3pc Sharp Head Wire Brush Set
With Nylon / Brass and Steel Bristles.
Sharp head allows for tight spaces and narrow corners.
Ideal for automotive use like paint and corrosion removal
also other detail cleaning jobs.

38pc Mixed Brush Set
1/4in. Hex Shaft
Quick Release Driver and Extension
Brushes : Brass | Nylon | Steel
Diameter : 8 - 19mm in 1mm increments.
For cleaning / de-burring cylinders / bushings and pipes.
1/4in. Extension allows use with power tools.