VAG Timing Tool Set
for Porsche Cayenne and Panamera V8 Engines
Also Porsche Cayenne utilizing the M97/01 V8 engine.
For camshaft timing on Direct Fuel Injection /
Turbo and Normally-aspirated Engines
Allows TDC Timing during servicing the
Camshafts / Cylinder Head / Timing Chain
or Variable Valve-timing Cam Phasers.
Cayenne V8 up to 2007 and Cayenne and Panamera 2008 onwards

Volvo Timing Tool Set
for B4204 8 Speed Transmission Engines.
For aligning the camshaft and crankshaft and
working on valve drive and renewing the cylinder head gasket.
Belt Pulley Counter Holding Tool
Crankshaft Wheel Puller
Radial Seal Ring Mounting Tool
Camshaft Sprocket Tool
Camshaft Alignment Tool

Antifreeze and Coolant Tester
Easy read scale and pointers.
Calibrated in degrees C and F.
Tests ethylene glycol strength and includes temperature adjustment scale for accurate interpretation of mixture strength.
Tests Ethylene Glycol strength while the engine is hot or cold.
Composite body and rubber bulb for workshop durability.

8pc Block Tester Kit
Detects exhaust gasses in the radiator
and checks for gasket damage also cracked or warped cylinders.
Works with Petrol | Diesel and Gas powered vehicles.
Use with combustion leak detector fluid - not included.
Suitable for use with sets - CT1585 and CT3380.

12V Smoke Leak Detector
For detecting leaks in pipe systems on cars and motorcycles
such as fuel pipes / air intakes and the radiator.
Smoke output value : 1 - 6 L/min
Output Pressure : 10 - 18psi
With Built-in air pump / Controllable flow value
Test Oil Capacity : 100ml
Supplied with all accessories needed.

Tube and Trim Cutter
With Multi-Angle Anvil and replaceable Utility Knife Blade.
Anvil Markings for 45 to 120 degree Angles.
Ideal for cutting Window Gaskets
Plastic Trim | Tubing and Conduit.

1.5 litre Fuel and Fluid Extractor
For AdBlue / Antifreeze / Brake Fluid / Diesel / Oil / Water.
Also for transmission of fluid / gear oil and engine oil / not ATF.
Suitable for fluid suction and supply during vehicle service.
Clear body for observing fluid content.
Features cap to avoid dripping.
Capacity : 1.5 litre.

8L Pneumatic Auto Transmission Fluid Extractor and Refill Kit
with 13 Adaptor Set for Audi / Ford / Mercedes / VW.
Extract / transfer and dispense fluid quickly and cleanly
With Pre-set Safety valve for automatic shut-off.
Pressure gauge to read and control pressure.
2 way control valve for dispensing more safely.
13 one touch adaptors for automotive fluid transfer.
Screw valve to switch from extractor to dispenser.
High flow control valve to extract fluid more efficiently.

24 piece Engine Oil Filler Set with Rotation Handle
Allows for fast oil filling without spillage.
Great for many late model vehicles with internal baffles.
2 litre funnel fits adaptor for wide application range.
Colour coded plastic adaptors for oil filler access.
Special angle extension with swivel feature for hard to reach places.
Contains 19 specific adaptors for leakage-free connection.

2.5L Oil Wheel Pan for Trucks and Trailers
Catches oil from wheel hubs after removing cap.
Prevents oil mess during wheel repair.
The pan fits rims with 13-3/4in. Inner diameters.
Handle compartments hold hub nuts.
Made of Polypropylene for durability.

16 litre Oil Drain Pan
Ideal for the Professional and Enthusiast Mechanic

12V Oil Exchange and Flushing Machine with Adaptor Set
For removing and exchanging automatic transmission oil.
Also for cleaning / flushing oil cooler and oil lines.
Pump Output : 70W
Oil Pressure Gauge Diameter : 70mm
Oil Pressure Display Range : 0 - 150psi / 0 - 10bar
Fresh and Used Oil Tank Capacity : 25 litre
Red and Black Hose : 2.5M x 12.5mm Diameter
All hoses with quick couplings / plug and socket
Max. Hose Pressure : 300psi / 20 bar

24 Litre Pneumatic Oil Extractor
Degree of Vacuum : 0 - -0.08mpa
Working Pressure : 8 - 10bar
Working Oil Temperature : 40 - 60 degrees C
Suction Speed -
0.8L/min - Hose diameter : 3.5mm
1.0L/min - Hose diameter : 4.5mm
1.6L/min - Hose diameter : 6.5mm
Designed to extract waste oil and fluids.

7pc Oil Drain Plug Key Set
Double Ended Oil Drain Plug Keys :
5/16in. Hex x 3/8in. / 10mm Hex
8mm Hex x 10mm Hex
8mm Square x 10mm Square
11mm Square x 12mm Hex
13mm Square x 14mm Hex
1/2in.Hex x 17mm Hex
Socket : 21mm | 1/2in.Dr

12pc Oil Drain Plug Key Set
For use with 3/8in.Dr Ratchet
Hex keys : 8 | 9 | 10 | 12 | 14 | 17mm | 3/8in.
Square Keys : 8 | 11 | 13mm | 3/8in.
With 3/8in.Dr Sliding T-Bar.
Applicable to Oil Sumps on most modern vehicles

7pc Oil Pan Thread Repair Set
with M13 Tap
6 Oil Drain Plugs with washers
Suitable for Cars / Motorbikes / Trucks and Vans

7pc Oil Pan Thread Repair Set
with M17 Tap
6 Oil Drain Plugs with washers
Suitable for Cars / Motorbikes / Trucks and Vans

15oz / 445cc Grease Gun
Die Cast Pump Head with Air Bleed
Can be used with Cartridge or Bulk Grease
Supplied with Rigid and Flexible Tubes

11pc Clutch Alignment and Adjustment Tool Set
Suitable for a wide range of vehicles and some light commercial vehicles.
Screw action provides fast adjustment for required hub diameter.
8 interchangeable spigot adaptors aid close alignment.
Adaptors : 12 | 14 | 15 | 16 | 17 | 18 | 19 | 20mm diameter.
Expanding mandrels : 15 - 19mm | 20 - 26.6mm | 23 - 36mm diameter.

Fast Fit Micro Puller 19 - 45mm
Supplied with thrust shaft extension
Capacity : 1 ton
Reach : 73mm
Puller Reach : 19 - 73mm / Min-Max
Puller Spread : 19- 45mm / Min-Max
Designed for the fast and safe removal of small bearings.
Also alternators / generators / domestic appliances / power tools and pumps.
Spring loaded and drop-forged legs are secured around the bearing or gear
by a screw collar to prevent slipping and subsequent damage or injury.

Adjustable Seal Puller
with 2 Hook Shapes
With rotating head for removing various oil and grease seals

Inner Tie Rod Installer / Remover Tool Set - 1/2in.Dr
Contains 12 SAE and Metric crowfoot adaptors
Sizes : 1-13/16 | 1-? | 1/5/16 | 1-3/8 | 1-7/16 | 1-1/2in.
29mm | 32.5mm | 33.6mm | 38.4mm | 40mm | 42mm
For inner tie rods that are inaccessible to adjust with a normal spanner.
The long socket slips over the tie rod end allowing the crowfoot adaptor
to engage with the fastener for easy removal and installation.
The inner tie rod can be removed and installed without removing the rack.

11pc Special Socket Set
for Castellated Lock Nuts
1/2in.Dr Sizes : 22 - 75mm
4 Tooth Sockets for removing castellated lock nuts
found on ball joints / axles and other applications.

43pc Turnbuckle Set for Shock Absorbers
Unique and comprehensive set of tools
for servicing spring or strut shock absorbers.
Suitable for a wide variety of vehicles
in conjunction with spring compressors.
Chrome Vanadium sockets and
Strut Nuts with 22mm hex drive.
Specialist bits with 10mm hex drive
Go-Thru Ratchet : 19 | 22mm.

Brake Fluid Tester
For accurately checking the quality of brake fluid.
With 5 LED?s to indicate percentage of water in the brake fluid.
Requires LR03 AAA 1.5V Battery / not included.
Automatic Power Off.

6pc Brake Bleed Wrench Set
Sizes : 7 | 8 | 9 | 10 | 11 | 12mm - 12 point
Combined Wrench / Socket and Nipple Connector.
Ideal for bleeding brake and hydraulic clutch systems without removing the wheels.
1.2M silicon hose with check valve for safety operating.
For universal bleeder nipples.

Dial Test Indicator & Precision Point Set
0 - 10mm Dial in 0.01mm increments.
Magnetic base with fine adjustment.
Magnet has a 60kg pull.
On / Off Switch for easy positioning.
Used to check variations in machined parts.
Ideal for checking run-out on disc brakes.

2pc Pneumatic Brake Extractor / Refill Kit
Kit contains a vacuum fluid extractor, bleeding hose
and automatic refill bottle with New safety design.
Automatic shut off when the tank is full.
Working pressure : 70 -170psi
Air inlet : 1/4in.
Tank Capacity : 2.0L
Bottle Capacity : 1.0L
Air consumption : 5 cfm

Pneumatic Brake Pressure Bleed Kit
Low pressure tank 10 - 40psi which can be pre-charged
with compressed air - making the unit fully portable.
Suitable for use on ABS systems.
Supplied with a range of vehicle adaptors.

5pc Brake Caliper Piston Rewind Kit - 3/8in.Dr
With powerful internal spring
T-Bar : 150mm | Main Body : 110mm plus Reaction Plate.
Magnetic 2 pin adaptor with 5mm diameter pins - for any standard rewind adaptor.
Adjustable 2 pin adaptor with 3mm diameter pins
from 25mm to 34mm pin centres - for electronic park brakes.
Adjustable 3 pin adaptor with 3mm diameter pins
from 17mm to 30mm pin centres - for common brake Caliper applications.

Disc Brake Caliper Piston Rewind Set
Air Powered Wind Back Tool 80-100psi
Compatible with 3/8in.Dr tools
Right and Left hand Operation
Converter for 2 pin Adaptors
15 Wind Back Keys

2pc Brake Line Jig Set
Clamp both new and old lines parallel
to each other to make exact copies.
A brake line can consist of many angles /
bends that should be correct for the new line to fit.
For steel / cooper and plastic coated brake lines
with 3/16in. or 1/4in.| 4.75mm to 6.3mm diameters.

16pc Brake Calliper Thread Repair Set
with 10 replacement threads.
Step Drill | M9 x 1.25 Tap | 7mm Hex Key
Drilling Gauges : Ford 105mm | Opel 94mm | VAG 91mm
For replacing damaged brake caliper threads
with a new threaded insert.

9pc Mini Bearing Separator Set
Compact set containing
Bearing Separator and 2 Leg Puller
Suitable for removing small gears
wheels and shaft fittings.
Separator : 15 - 58mm
Puller Jaw : 50mm

28pc Master Press and Pull Sleeve Kit
Designed for installation and removal of silent bearings,
hydro bearings, bushings, ball bearings, simmer rings,
shaft seals, rubber bearings etc.
Press sleeves / Inside diameter : 34 - 72mm
Press sleeves / Outside diameter : 44 - 82mm
Pulling spindles with nuts : M10 / M12 / M14 / M16
Stop Plate Discs: 34 - 72mm sleeves

Universal Press and Pull Sleeve Kit
Press Sleeves from 34 - 80mm Diameter in 2mm steps
Outside Diameter from 44 - 90mm in 2mm steps
5 x Pulling Spindles with nuts and thrust bearings
M10 | M12 | M14 M16 | M18

16pc Bearing Extractor Set
Puller and Slide-Hammer
Screw Adaptors : M6 x 1.0 / M8 x 1.25 / M10 x 1.5
Collets : 8 - 11mm / 12 - 17mm / 18 - 23mm / 24 - 29mm
30 - 34mm / 34 - 38mm / 39 - 43mm / 44 - 48mm / 49 - 53mm / 54 - 58mm
Ideal for dismantling bearings installed in a blind hole.

19pc Front Wheel Drive Bearing Service Kit
For the removal and installation of front hub bearings
without the need to dismantle the steering assembly.
Heavy Duty Steel Drifts : 55.5. to. 91mm

21pc Wheel Locking Nut Key Set
For removing Vauxhall / Opel locking wheel nuts on -
Agila | Astra F/G/H | Calibra | Corsa B/C/D |
Meriva | Omega B | Signum | Speedster |
Tigra A/B | Vectra B/C | Zafira A/B.
Vauxhall Wheel Lock Nut Keys equivalent to
OEM Z16512-181 to Z16512-200
With 17mm Alloy Wheel Nut Socket.

10pc Land Rover Wheel Locking Nut Key Set
Master Set of Tamper-proof Sockets
for removing the locking wheel nuts on Land Rover vehicles.
Hex Drive - Identified with : A | B | C | D | E | F | G | H | I | J.
Use with a 27mm Spanner or Socket
NOT for use with Impact Tools.

5pc Tesla Wheel Locking Nut Key Set
Applicable to Tesla Models : 3 / S / X
Identified as : A / B / C / D / E
For use with a 21mm Alloy Wheel Nut Socket or Spanner
Chrome Vanadium

3pc 1/2in.Dr Impact Socket Set
with Thin Wall and Protective Sleeve for Alloy Wheels
Sizes : 17 | 19 | 21mm
Designed to protect alloy wheel rims when removing wheel nuts

4 Way Cross Wheel Brace
Sizes : 17 | 19 | 21 | 23mm
with Dipped Covered Shaft

21in. Extending Wheel Wrench
1/2in.Dr Socket : 17mm | 19mm
Extends from 340mm to 510mm
For use on vehicle Wheel Nuts

8pc Wheel Guide Pin Set
For easy and damage-free wheel mounting.
Ideal for vehicles with composite disc brakes on most cars.
With knurling for better grip when screwing in or unscrewing.
Contents 2 x :
M12 x 1.25
M12 x 1.5
M14 x 1.25
M14 x 1.5

1/4in.Dr Air Ratchet Wrench
Torque : 20ft/lb
Free Speed : 280rpm
Air consumption : 3.5cfm
Air Inlet : 1/4in. BSP

1/2in.Dr Air Ratchet
Composite Body
Torque : 75 ft-lb
Free Speed : 180rpm
Max. Air Pressure : 6.2bar / 90psi
Air Consumption : 5.4cfm
Length : 260mm
Air Inlet : 1/4in.
Hose Size : 3/8in.

17pc Air Tool Kit
with Impact Gun / Ratchet Wrench and Sockets
1/2in.Dr Impact Wrench
3/8in.Dr Ratchet Wrench
Sockets : 9 | 10 | 11 | 13 | 14 | 17 | 19 | 22 | 24 | 27mm
3/8 to 1/2in. Adaptor
1/4in. Air Connector
Mini Oilier
Oil Pot
Hex Key

Keyless Reversible Air Drill - 3/8in.
Air pressure : 6.3bar
Free speed : 1800rpm
Average air consumption : 4 cfm
Max. chuck size : 3/8in. / 10mm
Air inlet : 1/4in.
Low noise, low vibration
Lightweight composite body
Forward / Reverse

Air Body Saw
Max. Speed : 10000/min
Cutting capacity : 16 gauge steel
Length of Stroke : 3/8in.
Air Pressure : 6.3bar
Air Consumption : 6cfm
Air Inlet : 1/4in. / Air Hose : 3/8in.
2 Saw blades included : 24T and 32T