52mm Impact Socket 1/2in.Dr
for Land Rover Hub Wheel Bearing Nuts
on Land Rover Classic | Discovery | Defender / 83 -
and most other Land Rovers registered after 1970.
6pt Single Hex 1/2'' Drive
Chrome Molybdenum

5pc Socket and Bit Set
1/2in.Dr for VAG Hub Nuts
12 Point Impact Sockets : 24 | 30 | 32mm
Hex Bits : 14mm | 17mm
CRV

5pc Hub Nut Socket Set - 1/2in.Dr
Sizes : 30 | 32 | 34 | 35 | 36mm
Chrome Molybdenum for Wheel Hub Nuts

Fast Fit Micro Puller 19 - 45mm
Supplied with thrust shaft extension
Capacity : 1 ton
Reach : 73mm
Puller Reach : 19 - 73mm / Min-Max
Puller Spread : 19- 45mm / Min-Max
Designed for the fast and safe removal of small bearings.
Also alternators / generators / domestic appliances / power tools and pumps.
Spring loaded and drop-forged legs are secured around the bearing or gear
by a screw collar to prevent slipping and subsequent damage or injury.

Gear Puller - 5 Ton / 2 Leg
Reversible / tapered jaws allow for use in the confined areas
Prevents unwanted damage and injury by maintaining the
correct alignment and grip during the removal process.
Capacity : 5 Ton
Jaws : 6in.
Spindle Length : 180mm
Hex Drive : 16mm

Extra Long Special Puller 10 - 50mm
for deeply seated bearings, gears, taps and bushes.
Maximum size of bearing: 50mm.
Arm spread : 10 to 50mm.
Reach : 230mm.
Self-centring force.
Drop forged legs with independent leaf springs.
Prevent damage to the shaft being pulled.
Work efficiency and time-saving effort.
Fine thread for easy use.

Gear Puller - 5 Ton / 2 and 3 Leg
Reversible / tapered jaws allow for use in the confined areas
Prevents unwanted damage and injury by maintaining the
correct alignment and grip during the removal process.
Capacity : 5 Ton
Jaws : 7in.
Spindle Length : 180mm
Hex Drive : 16mm

Gear Puller - 3 Jaw
8in. / 200mm
Reversible Legs

5 Ton Gear Puller
with Ratchet Action Legs
for One Man Operation
Capacity : 5in.- 8in. / 125 - 200mm

5 Ton Gear Puller Set
2 and 3 Way Short and Long Legs
Legs now with Ratchet Action
Short Legs : 4in.- 5in. / 100 - 125mm
Long Legs : 5in. - 8in. / 125 - 200mm
Chrome molybdenum -
Legs and Forcing Screw.

Gear Puller Set
with 2 and 3 Leg variations
Legs 3 | 4 | 6 | 8in. Long
Legs 75 | 100 | 150 | 200mm

Universal Puller Set
2 Leg / 3 Sizes
Variable Width
Chrome Molybdenum
Legs - 100 / 200 / 250mm Long

Puller Set - Universal 3 Arm
Puller set with different Leg Lengths for confined spaces
2 Leg Sliding Bar
3 Leg Sliding Bar
Arms - 100 / 200 / 250mm x 3
Spindles - 160 / 270mm Long.

Heavy Duty Hydraulic Puller Set
for removing Gears / Bearings and Sprockets

5 Ton Hydraulic Gear Puller
6 Way 2 and 3 Leg Configuration
Up to 10 Ton Capacity

5 Ton Hydraulic Gear Puller
Maximum Capacity : 5T
Maximum Horizontal Pull Distance : 200mm
Maximum Vertical Pull Distance : 140mm
Axis Stroke : 50mm
Suitable for pulling hubs / flanges / gears and bearings.
Equipped with 3 reversible jaws suitable for different needs.

10 Ton Hydraulic Gear Puller
Maximum capacity : 10T
Maximum Horizontal Pull Distance : 250mm
Maximum Vertical Pull Distance : 160mm
Axis Stroke : 50mm
Suitable for pulling hubs / flanges / gears and bearings.
Equipped with 3 reversible jaws suitable for different needs.

30 Ton Hydraulic Gear Puller
Maximum capacity : 30T
Maximum Horizontal Pull Distance : 400mm
Maximum Vertical Pull Distance : 250mm
Axis Stroke : 75mm
Suitable for pulling hubs / flanges / gears and bearings.
Equipped with 3 reversible jaws suitable for different needs.

50 Ton Hydraulic Gear Puller
Maximum capacity : 50T
Maximum Horizontal Pull Distance : 500mm
Maximum Vertical Pull Distance : 400mm
Axis Stroke : 75mm
Suitable for pulling hubs / flanges / gears and bearings.
Equipped with 3 reversible jaws suitable for different needs.

MAN / TGA Front Axle Lock Nut Socket
3/4in.Dr / 60mm Hex Drive.
Inner diameter : 134mm
Outer diameter : 147mm
Lug diameter : 118mm / width 11mm
Applicable to Man / TGA Front Axle / V982l-01

Steering Arm Removal Tool - 28 / 35mm
Track Rod End Remover
27mm Hex or 1/2in Drive /400mm Long
Suitable for most European vehicles

Steering Arm Removal Tool - 35 / 45mm
Track Rod End Remover
27mm Hex or 1/2in Drive /400mm Long
Suitable for most European vehicles

8pc Slide Hammer Set with Thread Adaptors
with 200g Slide Hammer - 260mm
Sizes : M10 - M4 | M10 - M5 | M10 - M6
M10 - M8 | M10 - M10 | M10 - M12
Connecting Nut : M10 / M10
Primarily used for extracting press-fit components,
including gears, bushings, and bearings.

10pc Slide Hammer Set with Thread Adaptors
Facilitates the servicing of Shafts / Bearings and Gears.
0.9Kg Slide Hammer - 290mm Long with M12 Thread.
6 x M12 Adaptors / External Thread : M3 | M4 | M5 | M6 | M8 | M10.
3 x M12 Adaptors / Internal Thread : M7 | M10 | M12 / 15-16G.

12pc Slide Hammer Set with Thread Adaptors
with 700g Slide Hammer - 260mm
Sizes : M10 - M4 | M10 - M5 | M10 - M6 | M10 - M8
M10 - M10 | M10 - M12 | M14 x 1.5 - M14
M14 x 1.5 - M16 | M14 x 1.5 - M18
Connecting Nuts : M10 | M10 | M10 | M1
Primarily used for extracting press-fit components,
including gears, bushings and bearings.

Universal Wheel Axle Nut Remove and Installation Kit
Engineered to loosen and tighten the rear wheel nut.
Both sides of pin are adjustable.
3 sets of pins for different vehicles.
For vehicles over 2 tons with circular nuts.
Pins : 5.5 | 6.8 | 9.1mm / Nut : M8 x P1.25

3pc Rear Axle Bearing Puller Set
Sizes : 1in. to 1-7/8in. | 1-5/16in. to 2-3/8in. | 1-3/8in. to 2-7/8in.
Allows for the easy removal of Semi-Floating Rear Axle Bearings
Suitable for most domestic vehicles

8pc Rear Axle Bearing Puller & Slide Hammer Set
With Small / Medium and Large Bearing Puller Adaptors
cover inner diameters from 1 to 1-7/8 | 1-5/16 to 2-3/8 | 1-3/8 to 2-7/8
respectively to remove semi-floating rear axle bearings.
Safely repair rear axle problems on the majority of domestic cars and light trucks.

3pc Rear Axle Tool Set for Mercedes-Benz
with Spline Bits : M10 | M12
For making tracking adjustments to the rear axle on
Mercedes-Benz vehicles without removing the plastic covers.
Double angled shaft to access hard to reach adjustment screws.
Suitable for Mercedes-Benz C-Class / W203 and S-Class
and older models with under body panels and vehicles with level sensors.

Rear Axle Locking Nut Spanner
For loosening and tightening the wheel bearing grooved lock nut
when replacing wheel bearings on rear axle shafts or full floating axles.
Applicable to : Mercedes Sprinter / W901 - W905 rear axles.
Can be used with a 1/2in.Dr Ratchet or Power Bar.

Rear Axle Locking Nut Spanner
For removing and replacing the wheel bearing grooved lock nut
when replacing wheel bearings on rear axle shafts or full floating axles.
Applicable to : Mercedes Sprinter / W901 - W905 rear axles.
Can be used with a 1/2in.Dr Ratchet or Power Bar.

4pc Rear Wheel Bearing Service Set
For removing / installing the rear wheel bearing and rear axle flange on
Mercedes vehicles : W124 | W129 | W201 W202

16pc Slide Hammer / Puller Set
Combination Puller with 5lb Malleable Steel Slide Hammer
Drop Forged Steel Pullers and Attachments
Converts to 2 or 3 Jaw Internal / External Pullers

9pc Mini Bearing Separator Set
Compact set containing
Bearing Separator and 2 Leg Puller
Suitable for removing small gears
wheels and shaft fittings.
Separator : 15 - 58mm
Puller Jaw : 50mm

Bearing Puller Kit with Ball Ended Puller Adaptor
Suitable for removal of a variety of blind bearings
where traditional bearing and gear pullers will not reach.
Ball-end tips fit inside bearing races to provide traction for bearing extraction.
Bearing Sizes : 5 / 6 / 8 / 9 / 11 / 12.5mm

Small Insert Bearing Puller Kit
For the removal of bearings where other pullers are unable to be used
by locking into the bearing race itself.
Adjustment range : 20 - 90mm
Interchangeable heads : 5.5 / 6.0 and 8.0mm diameter
Puller yoke and Forcing screw
2 Legs and Extensions
Centre screw thread cap
6 Ball ended threaded puller adaptors

Small Universal Press Support Ring
Outer diameter : 115mm
Inner diameter : 100mm
Height : 160mm
Wall : 7.5mm
Capacity : 10T
for the removal of Wheel Bearings / Bushings and Hubs
Usually working in combination with a hydraulic press.
Great alternative to traditional V blocks and old bearing casings.
Can be used with Universal press support blocks / not included.

Large Universal Press Support Ring
Outer diameter : 180mm
Inner diameter : 160mm
Height : 160mm
Wall : 10mm
Capacity : 40T
for the removal of Wheel Bearings / Bushings and Hubs
Usually working in combination with a hydraulic press.
Great alternative to traditional V blocks and old bearing casings.
Can be used with Universal press support blocks / not included.

Medium Universal Press Support Ring
Outer diameter : 140mm
Inner diameter : 120mm
Height : 160mm
Wall : 10mm
Capacity : 40T
for the removal of Wheel Bearings / Bushings and Hubs
Usually working in combination with a hydraulic press.
Great alternative to traditional V blocks and old bearing casings.
Can be used with Universal press support blocks / not included.

3pc Universal Press Support Ring Set
Diameters : 115mm / 100mm | H : 160mm | W : 7.5mm | Cap :10T
Diameters : 140mm / 120mm | H: 160mm | W : 10mm | Cap : 40T
Diameters : 180mm / 160mm | H: 160mm | W: 10mm | Cap : 40T
for the removal of Wheel Bearings / Bushings and Hubs
Usually working in combination with a hydraulic press.
Great alternative to traditional V blocks and old bearing casings.
Can be used with Universal press support blocks / not included.

49pc Universal Hydraulic Bushing Installer & Extractor
For removal and installation of various bearings and seals.
Range : 18mm to 60mm Diameter.
18 ton hydraulic cylinder used with hand or foot pump.
With Short Sleeves - 40mm length
Long Sleeves with window prevent from over-installing - 110mm length
Plus Spindles for most common centre hole sizes :
M10 x P1.5 | M12 x P1.75 | M14 x P2.0 and M16 x P2.0

30pc Master Press and Pull Sleeve Kit
For the installation of bushes / bearings and seals
For both cars and light commercial vans.
Inside Diameters 34 - 72mm in 2mm steps
Outside Diameters 44 - 82mm in 2mm steps
Pulling Spindles M10 . M12 . M14 . M16.

26pc Universal Press and Pull Sleeve Kit
For the removal and installation of bushes / bearings and seals etc.
22 x Press Sleeves inside diameter from 34-80mm in 2mm steps
Outside diameter from 44-90mm in 2mm steps
M10. M12. M14. M16 Pulling Spindles

25pc Universal Press and Pull Sleeve Set
for HGV and Commercial Vehicles
such as LGVS, HGVS, Tractors etc.
Ideal for Hydraulic or Silent Bushings, Ball Bearings, Oil Seals.
Can be used with spindle and hydraulic workshop press.
Slotted sleeves allow easy view of the bearing or bushing.
Inner Sleeve Sizes : 74 - 112mm / 2mm steps.
Outer Sleeve Sizes : 84 - 122mm / 2mm steps.
Spindle Sizes : M10 x 3 / M12 x 3 / M14 x 3 / M16 x 3 / M18 x 3.

Universal Press and Pull Sleeve Kit
Press Sleeves from 34 - 80mm Diameter in 2mm steps
Outside Diameter from 44 - 90mm in 2mm steps
5 x Pulling Spindles with nuts and thrust bearings
M10 | M12 | M14 M16 | M18

Replacement M10 Pulling Spindle
for Universal Press and Pull Sleeve Kits CT2934 or CT3187 or CT3757

Replacement M12 Pulling Spindle
for Universal Press and Pull Sleeve Kits CT2934 or CT3187 or CT3757

Replacement M14 Pulling Spindle
for Universal Press and Pull Sleeve Kits CT2934 or CT3187 or CT3757

Replacement M16 Pulling Spindle
for Universal Press and Pull Sleeve Kits CT2934 or CT3187 or CT3757

Replacement M18 Pulling Spindle
for Universal Press and Pull Sleeve Kit CT2934

Universal Bearing Packer
111mm Cone Diameter.
Suitable for packing bearings with an even spread of Grease.
A Clean and Quick method - place bearing on to the bottom cone
screw down the cone lid and pump grease into nipple.
Works on most tapered roller bearings found on cars / boats and trailers.
Knurled grips for oily fingers.

Universal Wheel Bearing Spreader
Designed to separate the suspension strut from the wheel bearing housing.
Spreading range : 5.0 - 11.5mm
Drive : 17mm Hex

Master Bearing Race and Seal Driver
Aluminium all in one self contained precision driver with rotating handle and expanding jaws to seat races / bearings or seals with ease.
Variable Jaws cover a range of 18.5 - 89mm or 0.72 - 3.50in.

Bearing Race and Seal Driver Set - 7pc

11pc Bearing and Seal Driver Set
For the Installation of Bearings and Seals
Drive Flanges : 39.5 | 44.5 | 50 | 59 | 63 | 65 | 72 | 76 | 81mm
with Aluminium Mandrel Driver

21pc Wheel Bearing and Seal Installation Kit
Suitable for mounting bearings and sealing rings.
Particularly useful when used with a hydraulic press.
Kit includes 17 mounting pads 70 to 150mm diameter in 5mm steps.
273mm handle for use with a hammer.

Wheel Bearing and Seal Installation Kit
New lightweight design to prevent damaging the bearing or housing.
Contains 3 metal bearing drift sleeves
and 34 nylon drifts with Deadblow Hammer.
Can also be used to install oil seals.
Fits most modern vehicles

51pc Bearing and Bushing Seal Master Driver Set
Suitable for mounting bearings | bushings and sealing rings.
220mm knurled handle grip for use with a hammer.
Particularly useful when used with a hydraulic press.
Support Disc - 74 mm |

Wheel Bearing Lock Nut Wrench
Adjustable jaws with locking feature
to suit both hexagon and octagon wheel bearing lock nuts.
6 point lock nuts 49 - 135mm
8 point lock nuts 49 - 143mm
Pin diameters 6mm / 8mm / 10mm

Wheel Bearing Circlip Removal / Assembly Lever Tool
Unique lever tool with specially shaped hook that allows
the easy removal and fitting of wheel bearing internal circlips.
Applicable to Vauxhall / Opel / Ford / PSA / Fiat and VAG vehicles

68mm Bearing Inner Ring Puller
For removing the inner wheel bearing rings on wheel hubs.
The bearing rings usually remain on the wheel hub
when the wheel bearings are removed.
Integral Clamp holds the puller legs
securely behind t

16pc Bearing Extractor Set
Puller and Slide-Hammer
Screw Adaptors : M6 x 1.0 / M8 x 1.25 / M10 x 1.5
Collets : 8 - 11mm / 12 - 17mm / 18 - 23mm / 24 - 29mm
30 - 34mm / 34 - 38mm / 39 - 43mm / 44 - 48mm / 49 - 53mm / 54 - 58mm
Ideal for dismantling bearings installed in a blind hole.

3pc Bearing Puller Set
Sizes : 3 | 4 | 6in. with Reversible 3 Leg Jaw

5pc Bearing Puller Set
Bearing extractor collets with internal capacity from 11 to 32mm Collets : 10 - 14mm | 15 - 19mm | 18 - 25mm | 25 - 32mm
3/8 - 1/2in. | 9/16 - 11/16in. | 5/8 - 1in. | 1 - 1-1/4in.
Slide Hammer - 377mm / 0.85kg

5pc Wheel Bearing Puller Set
Internal and External 3-Jaw Pullers
External puller 15mm - 80mm
Small Internal puller 15mm - 30mm
Large Internal puller 30mm - 80mm
Slide Hammer to aid pulling out the bearing.

9pc Bearing Puller Set
Removes gears / pulleys and steering wheels.
3lb Slide Hammer with T-handle - 390mm
8 - 10 | 10 - 12 | 12 - 14 | 15 - 17 and
17 - 20 | 20 - 24 | 25 - 29 | 30 - 32mm

Bearing Separator Set
2 Sizes : 50 and 75mm
4 Sets of Hex Push-Puller Legs and Bar-Type Puller Head
125mm Puller Cross-Bar with 160mm Forcing Screw

31pc Wheel Hub and Bearing Service Tool Set
Allows Servicing to the wheel hub and wheel bearings.
Pressure Plates -
50 | 55 | 59 | 63.3 | 66.6 | 70.3 | 71.5 | 73.1 | 73.4 | 74.8 | 77.5 | 81.5 | 83.4mm
Sleeves with following diameters : 76 | 86 | 91 | 102mm
Extractor bolts M12 x 1.5 | M14 x 1.5
Spindle 7/8 x 300mm including thrust bearing
Pressure nut 32 x 60mm and Pressure sleeve 38 x 40mm

14pc Bearing Splitter and Gear Puller Set
With various threaded connector bolts | Bearing Separators | Pawls and Push Rod

Bearing Separator
Drop forged
Clamping Width : 46mm - 230mm max
Clamping Bolt Length : 350mm / Distance : 224mm / Thread : M25 x 2.5
Puller Bolt : 3/4in. x 10 UNC
Puller Bolt distance : 164mm / 350mm max
Splitting Knife Base : 102mm - 288mm max
Suitable for removing bearings / gears and bushings from shafts.

Bearing Separator Puller Kit
For use with CT6292 - Ball Bearing Separator
Includes : 400mm Puller Cross Bar.
455mm Lead Screw with 1-1/8in.thread / 22mm Hex Head.
290mm Push-Puller Legs with 3/4in.thread.
270mm Extension Legs with 3/4in.thread.
For removing gears, pullers, bearings, steering wheels, etc.
Suitable for large bearing removal on vehicles, ATV's and light trucks.

19pc Wheel Hub and Bearing Service Kit
For fitting modern GEN2 Wheel Hub Bearing Units
where the Hub and Bearing are a combined unit.
M18 Pulling Spindle with nuts and thrust bearings.
Heavy Duty Steel Drifts
May be used in conjunction with a Hydraulic Shop Press.

19pc Front Wheel Drive Bearing Service Kit
For the removal and installation of front hub bearings
without the need to dismantle the steering assembly.
Heavy Duty Steel Drifts : 55.5. to. 91mm

25pc Wheel Bearing Installation Set
Front wheel drive vehicles 60mm to 85mm.
Reduces chances of damage to hub and bearing.
Heavy duty steel drifts.
For use with impact tools.
Also suitable for industrial bearings.

Bearing Service Tool Kit for Front Wheel Drive Vehicles

18pc Silent Bearing Tool Set for VAG Rear Axles
For assembly and disassembly of bearings both on and off the vehicle.
For the replacement of silent bearings from the wheel bearing housing
axle guide / trailing arm / wishbone lower / internal as built in
push rod and the upper wishbone not built-in.
For use alongside mechanical spindle.
Applicable to most Audi / VW / Seat vehicles

VAG Wheel Bearing Tool Set
For mainly Audi / VW vehicles
Clamping nut | Pull spindle |
Bearing cover | Housing | Adaptor ring.
Centring Rings 34 to 80mm
Pressure Rings 65 to 85mm
Retainer adaptors for Clamping nut
Pressure spindle and Mechanical spindle

Mercedes Wheel Bearing Tool Set
A | B | C | E | M | V Class | 190 series | W124
Pulling spindle | Bearing cover | Adaptor ring
Centring Rings - 42 to 80mm Diameter
Pressure Rings - 66 to 93mm Diameter
Pressure spindle with O-ring and mechanical spindle
A Professional way to remove and replace wheel bearings.

Peugeot-Citroen-Renault Wheel Bearing Tool Set
Pulling spindle | Bearing cover | Adaptor ring.
Centring Rings - 35 | 37 | 42 | 45 | 60 | 75mm
Pressure Rings - 65 | 72 | 82 | 83mm
Pressure spindle with O-ring and mechanical spindle
A Professional way to remove and replace wheel bearings.

Wheel Hub Bearing Unit Tool Kit
for Citroen / Opel / Peugeot / Toyota Vehicles
For pressing out and fitting compact wheel bearings on
the rear axle without removing the axle knuckle and ABS sensor.
For changing the complete Wheel Beari

VAG Wheel Hub Bearing Tool Set - 62mm
For combined wheel hub and bearing units.
Suitable for direct use on vehicle while in-situ.
Mounting shells and Dismantling shells
Mounting and Dismantling plates
Pressure plate with 8 holes

VAG Wheel Hub Bearing Unit Tool - 66mm
For removing and installing the compact wheel bearing
combined wheel hub and bearing unit on VAG vehicles.
High strength ball bearing fitted spindle.
Applicable to VAG vehicles

VAG Compact Wheel Bearing Set
For removing and installing the compact wheel bearing
combined wheel hub and bearing unit on VW vehicles
with high strength spindle and components

Front Wheel Hub Bearing Unit Tool - 78mm
on Ford | Mazda | Volvo
With Pressure plate and bolts
Disassembly shells and pressure piece
Mounting shells and pressure piece
High strength ball bearing spindle.

Wheel Bearing Tool Set for Ford | Land Rover | Volvo
For GEN2 wheel bearings
Ford - Focus II.5RS | Focus 2.5RS 50
Ford - Mondeo MkIV from 2007
Galaxy from 2006 | S-Max from 2006 Front
Volvo S80 | V70 | XC60 | XC70 from 2006

Compact Wheel Bearing Set for Audi / VW
For removing and installing the compact wheel bearing / combined wheel hub and bearing unit on VW Polo Fox etc.
High strength spindle and components suitable for direct use on vehicle while in-situ.

Wheel Hub Bearing Unit Tool Kit
Consists of parts from 4 kits for
62 / 66 / 72 / 85mm VAG applications
CT3872 62mm Kit - Audi A2 | VW Lupo / Front
CT4275 66mm Kit - Skoda Fabia | VW Fox / Front | Polo
CT3582 72mm Kit - Audi A1 / A2 |
Seat Cordoba | Ibiza | Skoda Fabia | Roomster
VW Polo / Front | VW Fox with PAS / Front.
CT3763 85mm Kit - VW Multivan | Touareg | Transporter

90mm Audi Wheel Hub Bearing Unit Tool
For assembling and disassembling front wheel hubs.
For use with workshop hydraulic press.
Suitable for Audi A4 | A6 | A8 | R8.
Pressure Plate and Push Pins.
Disassembly shells.
Disassembly pressure piece.
Mounting sleeve

Wheel Hub and Bearing Repair Kit
Wheel Bearing Hub Removal and Repair for
Rear Wheel Drive Mercedes / Porsche and BMW.
Front Wheel Drive VAG and Asian vehicles.
The Best Kit around for rear wheel hub
and bearing servicing on German vehicles.

Wheel Hub and Bearing Service Kit
Designed to extract and install the drive flange and wheel bearing
on front and rear wheel drive vehicles where a one piece bearing is used.
Applicable to -
Rear wheel drive vehicles : BMW / Mercedes-Benz and Porsche.
Front wheel drive vehicles : Chrysler / Ford / Honda / Hyundai
Infiniti / Kia / Lexus / Mazda / Nissan / Toyota and VAG.
For use on drive axles only.

Wheel Hub and Drive Shaft Puller
4.3kg slide hammer for wheel hubs
and front-wheel drive shafts and brake drums
Suitable for most vehicles.
Bolt Size : M12 x 1.5 / M14 x 1.5

Hydraulic Wheel Hub Puller
Hydraulic Ram with 10 Ton capacity
used to press the axle shaft from the hub.
For 4 or 5 bolt hubs with a 96 - 125mm diameter circle.
Applicable to most vehicles

Universal Hub Puller Kit
with Hydraulic Ram
giving up to 12 Tons of pressure
with a large Slide Hammer assembly.
Suitable for almost all 3 | 4 | 5 and 6 holed hubs.
Ideal for use on a wide range of vehicles

Wheel Hub Removal Tool
Designed to allow the easy removal of seized wheel hubs.
Covers most cars and LGV vehicles with 5 / 6 / 8 hub assemblies.
Apply the spindle to a solid point on the hub.
The spindle must put pressure on at least t

Rear Hub on FWD Ford Transit Puller.
The bearings on these Transits often seize in place
requiring this special tool for removal of the hub.
2000 Front wheel drive models only

Front Wheel Bearing Puller for Ford Transit 2006 onwards
Engineered for the safe in-situ removal of the drive flange
from the bearing / hub unit when replacing brake discs.
Allows the drive flange to be split from the hub assembly and then re-used.
Puller with retaining key
Pressure plates : large / small
Spindle with hexagonal drive
Screw set - 5pc

Universal Wheel Hub Puller
200mm puller screw with striking wrench.
Fits hubs up to 250mm diameter.
For most makes and models of cars or commercial vehicles.
Revolving end of legs ensure that no damage can be done to studs
axle or inner parts of the wheel.

Hydraulic Wheel Hub Puller Set
and Ball Joint Removal Tool
Max : 10 Ton rated
Ram Length : 270mm x 38mm
Tommy bar length : 119mm
High density steel with knurled grip
Thread pitch of ram : 16 gauge x 3/8 BSW
Weight : 2kg

10 Ton Hydraulic Ram
Ball Joint Hub Bearing Puller Tool
Suitable for Cars and Vans.
Ram Length : 270mm
Width : 38mm
Tommy bar length : 119mm
Thread pitch of ram : M12 x 1.75
For use with CT0556 / CT3612 / CT3396

Universal Hub / Brake Drum Puller
Suitable for removing 4-stud vehicle wheel hubs.
Bolt centres : 100 - 115mm
Overall width : 145mm
Depth : 38mm

74mm Hub Nut Socket - 3/4in.Dr
for VW / GM and Mercedes Vans
Suitable for Volkswagen Crafter rear hub nuts
also fits Mercedes 511 twin rear wheel models
and GM Movano and Renault Vans.
S45C Steel

Rear Hub Nut Socket - Ford Transit
1/2in.Dr Heavy duty 4 point specialised impact socket
for removing the rear hub nut on RWD Ford Transit vehicles 2014 -.
Alignment shaft allows accurate location onto castellated nut.

Front Wheel Bearing Socket
1/2in.Dr with 4 pins / 6mm diameter.
For the front wheel bearing lock ring on Suzuki Jimny Grand Vitara.
For use with both manual and impact wrenches.
OEM Code : 09951-16050
Kent-Moore J-37763

Socket Set - 7pc For Wheel Bearing Lock Nuts
Contains one of each 2-3/8in . 2-1/2in and 55mm Sockets
2-1/2in . 2-3/4in . 2-9/16in and 2-3/8in rounded lock nuts
1/2in Drive

9pc Groove Nut Socket Set - Outside Teeth
with 1/2in.Dr and 3/4in.Dr Sockets
For removing and installing DIN 981 Locknuts
Suitable for following grooved nut sizes :
1/2in.Dr : KM4 | KM5 | KM6 | KM7 | KM8
3/4in.Dr : KM9 | KM10 | KM11 | KM12

9pc Groove Nut Socket Set - Inside Teeth
with 1/2in.Dr and 3/4in.Dr Sockets
For removing and installing DIN 981 Locknuts
Suitable for following grooved nut sizes :
1/2in.Dr : KM4 | KM5 | KM6 | KM7 | KM8
3/4in.Dr : KM9 | KM10 | KM11 | KM12

13pc Special Socket Set
with Internal Teeth for Grooved Nuts
Sizes :18 | 22 | 25 | 28 | 32 | 38 | 45 | 52 | 58 | 65 | 70 | 75 | 80mm
For gently loosening and tightening groove nuts
60mm Long with 1/2in.Dr

105mm Hub Nut Socket
1in.Dr
for DAF Trucks
Drop Forged CRM

80mm Front Hub Nut Socket
1in.Dr | 8 Point
for Scania Trucks
Drop Forged CRM

10 Ton Hydraulic Shop Press
Heavy Duty H-frame 10 tonne hydraulic shop press with sliding ram.
Adjustable crosspiece - 3 positions : 95 / 180 / 265mm
Capacity : 10 tonne
Work Range : 0- 340mm
Ram Stroke : 135mm
Ideal for Straightening / Bending and Stamping
With safety valve to protect the press from overloading.
Complete with two flat V-shaped blocks.

20 Ton Hydraulic Shop Press
Floor Standing Heavy Duty H-Frame
Stroke : 160mm
Work Range : 0 - 998mm
G.W. : 104kgs
N.W. : 102kgs
Package Size : 1630 x 190 x 320mm
Ideal for Straightening / Bending and Stamping

30 Ton Hydraulic Shop Press
Floor Standing Heavy Duty H-Frame
Ideal for Straightening / Bending and Stamping

50 Ton Hydraulic Shop Press
Floor Standing Heavy Duty H-Frame Construction
Capacity : 50 Tons
Working Range : 0 - 1000mm
Ram Stroke : 185mm
Air Pressure : 110 - 120psi
Air Inlet : 1/4in. NPT
Ideal for straightening / Bending and Stamping.

Universal Hydraulic Press Support Block
For use with a workshop press
Guarantees a perfect and safe support
Length: 2750mm
Width: 210mm

6pc Hydraulic Press Accessory Kit
For use with up to 50 Ton press
Constructed from high quality material to ensure long lasting durable performance.
Kit Includes :
3 x Punches : 1/2 | 1 | 1-7/8in.
2 x Steel press plates : 14 x 3 x1in.
1 x Bearing shield
Can be used in a variety of press applications.

14pc Wheel Hub Grinder Set
10 Grinding Discs 40mm diameter / 14mm deep.
Drive Connector : 1/4in. / 6mm shank
1/2in.Dr - 8mm Hex Adaptor
Made from Nylon and carborundum.
For removing rust and road debris from wheel hubs and brake discs.

7pc Wheel Hub Grinder Set
6 Grinding Discs 40mm diameter / 14mm deep.
Drive Connector : 6mm shank
Made from Nylon and carborundum.
For removing rust and road debris from wheel hubs and brake discs.

Impact Drive Stud & Hub Cleaning Tool Set for HGVs
For Air or Power Impact Wrenches with 1/2in.Dr
Suitable for HGV wheel studs up to 28mm diameter
with a maximum length of 80mm.
With Impact Drive Locking Sleeve and Disc Adaptor.
6 Abrasive Discs :
50 x 12 | 50 x 13 | 50 x 14mm.
60 x 16 | 60 x 22 | 60 x 28mm.

Rotary Abrasive Hub Cleaning Tool - 1/2in.Dr
Suitable for vehicle wheel hubs up to 150mm diameter
Optimized for wheel hubs with enlarged inner 90mm diameter.
For quick and easy removal of dirt and rust from wheel hubs
and brake discs with wheel support bolt.
Quick cleaning of the contact surfaces.
For use with air impact or power / cordless tools - 1/2in.Drive
Interchangeable abrasive velcro disc replacement - CT6186

Rotary Abrasive Hub Cleaning Disc
or Grinding Wheel
Replacement Disc for CT6185
Inner diameter : 90mm / Outer diameter 150mm