190pc Heavy Duty Hitch Lynch and PTO Pins
Contents :
Square Pins : 5/16in.
Double Pins : 1/4 | 3/8in.
Lynch Pins : 1/4 | 3/16 | 5/16 | 7/16in.
Hair Pins : 1.8 | 2.0 | 2.5 | 3.0 | 4.0mm
For Trailers / Tractors / Trucks / Towing / Mowing

3pc Quick Release Magnetic Bit Holder Set
Drill Bit or Screwdriver Bit Extension Bars
1/4in. Shank with Quick Release
Sizes : 70 | 150 | 300mm Long

4pc 1/4in. Shank Threaded Rod Socket Set
Sizes : 6 | 8 | 10 | 12mm.
Compatible with Power Drills and 19mm Hex Wrenches.
Designed for assembling and disassembling studs,
commonly used to support air conditioning units,
lighting, piping, and cables on ceilings or walls
Prevents damage to the threads.
Self adjustable.

Socket Holder with Heavy Duty Carabiner
for 3 1/2in.Drive Sockets
With quick-release mechanism for locking sockets securely
allowing for easy one-hand release by pulling the collar.
Perfect for organizing and accessing your sockets quickly.
Attach and transport by clipping them to your tool belt or bag.
Aluminium and steel for maximum durability and strength.
The ideal socket storage solution for those who need quick,
portable access to their tools.

3pc Weighted Impact Socket Set
Sizes : 17 | 19 | 21mm / Single Hex - 6pt profile.
1/2 Inch Square Drive
Length : 97mm.
Designed for use on fixings that have a high torque setting.
Heavy Counter-Weighted design reduces impact loss
increasing the effective torque.
Applicable to, but not limited to :
Ford / GM / Honda / Jeep / Kia / Lexus / Mazda / Toyota vehicles.
Chrome-Molybdenum

10pc Interchangeable Torque Wrench Set
Torque Wrench : 5 - 25Nm.
72 Teeth Ratchet Head : 1/4in.Dr
Spanner Heads : 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14mm.
Designed for use with plug-in inserts - allowing the torque wrench
to be used as a Fixed Head Wrench or with a Ratchet Head.
Accuracy : Plus or Minus 3 percent tolerance from the set scale value.

8pc Interchangeable Torque Wrench Set
Torque Wrench : 20 - 120Nm.
72 Teeth Ratchet Head : 1/2in.Dr
Spanner Heads : 17 | 22 | 24 | 26 | 27 | 30mm.
Designed for use with plug-in inserts - allowing the torque wrench
to be used as a Fixed Head Wrench or with a Ratchet Head.
Accuracy : Plus or Minus 3 percent tolerance from the set scale value.

11pc Interchangeable Torque Wrench Set
Torque Wrench : 40 - 220Nm.
72 Teeth Ratchet Head : 1/2in.Dr
Spanner Heads : 13 | 14 | 15 | 17 | 19 | 22 | 24 | 27 | 30mm
Designed for use with plug-in inserts - allowing the torque wrench
to be used as a Fixed Head Wrench or with a Ratchet Head.
Accuracy : Plus or Minus 3 percent tolerance from the set scale value.

34pc Torque Wrench Set
For Motorcycle and Bike Repair.
1/4in.Dr Torque Wrench | 72T: 5-25Nm
1/4in.Dr Sockets: 4 | 4.5 | 5 | 5.5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14mm
3/8in.Dr Socket : 15mm
Adaptor : 1/4in. to 3/8in.Dr
1/4in.Dr Extension Bar : 4in. / 100mm
1/4in.Dr Bits : H2 | H2.5 | H3 | H4 | H5 | H6 | H8 | H10 | T10 | T20 | T25 | T30
With Spoke Wrench / Nylon Crowbar / Chain Puller.
Accuracy : Plus or Minus 3 percent tolerance from the set scale value.

3pc Torque Wrench Set
1/4in.Dr : 2 - 24 Nm
3/8in.Dr : 19 - 110 Nm
1/2in. Dr: 28 - 210 Nm
For tightening and final check of torque settings.

8pc Combination Spanner Set
Offset Open and Ring End suitable for small spaces.
Open End : 3.2 | 4 | 5 | 6 | 7 | 8 | 9mm
Ring End : 4 | 5 | 5.5 | 6 | 7 | 8 | 9 | 10mm
Short Form

7pc Flexi-Head Ratchet Wrench Set
Extra Long Double Joint Flexible Head Ratchets
Sizes : 8 x 9mm | 10 x 11mm | 12 x 13mm
14 x 15mm | 16 x 18mm | 17 x 19mm.
Plus Magnetic Pick-up Tool
New Updated double joint ratchet wrench set
can fold into a Z shape, allowing parallel twisting in narrow
Deep hard-to-reach places like under cars or behind pipes.
80 percent longer than standard spanners
Chrome-Vanadium

Fuel Line Pliers with Multi-Angle Jaws
Max opening width : 160mm
For disconnecting push-to-fit quick connectors / such as
SAE J2044 2-button type which are widely found in fluid /
vapour transfer systems, including fuel line / EVAP systems.
Also SCR line AdBlue systems,
cooling / heating systems and brake line systems etc.
Multi-angle jaw for hard to reach / difficult access areas.
Applicable to a wide range of vehicles :
Fiat / Mercedes-Benz / Vauxhall / Opel / VW Group vehicles.

Mercedes Benz 1.6 2.0L HP Diesel Pump Removal Tool
The Mercedes-Benz W654 1.6 and 2.0L diesel engines
use a timing chain driven high pressure diesel fuel pump.
Applicable to : A / B / C / E / V Class 2016 - 2019
CLA / CLS / GLB / GLC Coupe / GLE / Vito / 2018 - 2019
Engine Code : 1.6L 654.916 | 2.0L 654.920.
OEM Code : W654 589 0014 00.

Universal Valve Spring Compressor
For the removal and installation of valve springs on
Such as : Mitsubishi | Hino | Isuzu
With Clamping Bolt Nut : M16 x 2.0
M16 x 240mm Clamping Bolts :
M8 x 1.25 | M10 x 1.5 | M10 x 1.25 | M12 x 1.75 | M14 x 1.5
Valve Clamping Bridge and Pressure Piece

Diesel Cylinder Sleeve Puller Set
for dismantling wet cylinder liners from 60mm to 160mm.
With fully adjustable puller attachment.
For pulling off worn-out cylinder sleeves on most - motorcycles,
cars, heavy goods vehicles, agricultural engines and boats.
Not for use with power tools - hand tool use only.
Wet cylinder liners can also be found in
Vintage, Classic and Modern Engines.

BMW Front Crankshaft Seal Installer
for BMW B47 | B48 | B57 | B58 Engines
Applicable to : Series 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 / 2014 - 2021
X3 | X4 | X5 | X6 | X7 | Z4 / 2014 - 2021
Petrol : 2.0L / 1.6L / 3.0L | Diesel : 2.0L / 3.0L
OEM Code : 118801 / 2 / 3 / 4

Front Main Crankshaft Oil Seal Installer - Isuzu 3.5T
For the correct fitment of the front crankshaft oil seal
on 3.5 tonne Isuzu Truck Diesel Engines
to prevent the oil seal from damage on installation.
Vehicle applications :
N-Series trucks | D-Max and Trooper.
Engine : 4JG2 | 4JH1 - 110HP / 130HP
OEM Code seal numbers : BZ 4961E

Rear Main Crankshaft Oil Seal Installer
for Isuzu 3.5 Tonne Trucks
For correctly fitting the rear crankshaft oil seals
preventing the oil seal from damage when installing.
130 to 140 HP Engines : N-Series Trucks | D-Max | Trooper.
4JK1 / 2.5 | 4JB1 / 2.8L | 41JG1 / 3.1L | 4JH1 / 3.0L
OEM Codes : EN-50351 | 5-8840-2359-0.
Seals OEM : BZ4962-E | 8-97071-561-1

Ford Timing Tool Set for 1.0L Turbo and 1.1L
naturally aspirated wet-belted petrol engines.
Applicable to Ford vehicles from 2012 - 2020
For locking and holding the engine in the correct timed position,
allowing for safe removal and replacement of the camshaft
drive belt and accurately check the engine timing.
Engines : 1.0L 3 cylinder turbo charged EcoBoost from 2012
1.1L 3 cylinder normally aspirated from 2017.
OEM Codes : 303-1602 | 303-1603 | 303-1604 | 303-1605 | 303-732 | 303-1054.

PSA Timing Tool Set
for Wet Belt 1.0 | 1.2 Petrol Engines
Flywheel Locking Tool
Inlet Camshaft Timing Tool
Exhaust Camshaft Timing Tool
with 8mm and 9mm Changeable Plate.
Camshaft Setting Tool
Cambelt Checking Tool
Exhaust Camshaft Alignment Tool
Crankshaft Holding Tool

VAG Timing Adaptor Kit
For 1.0 | 1.2 | 1.4 / 1.4 CPTA / CZDB / CZEA TSi Petrol Engines
Mounting Spacers and Screws for Adaptor Plate
Inlet Camshaft Spacer Boss
Exhaust Camshaft Spacer Boss
Inclinometer Reference Bar - see CT6751
Exhaust Camshaft Adaptor
OEM Code : VAS 611 007

VAG Timing Adaptor Kit
For 1.0 | 1.2 | 1.4 TSi Petrol Engines
Mounting Spacers and Screws for Adaptor Plate
Inlet Camshaft Spacer Boss
Exhaust Camshaft Spacer Boss
Inclinometer Reference Bar - see CT6751
TSi ACT | EA211 3 and 4 cylinder without ACT

VAG Timing Adaptor Kit
For 1.4 CPTA / CZDB / CZEA TSi Petrol
Exhaust Camshaft Adaptor
1.4 TFSI COD / TSI ACT / TFSI / BlueGT TSI ACT
Applicable to : Audi / Skoda / Volkswagen

VAG Timing Adaptor Kit
For 1.0 | 1.5 | 1.6 TSi Petrol Engines
Inlet Camshaft Adaptor
Inlet Camshaft Spacer Boss - Long
Inlet Camshaft Spacer Boss - Short

Transmission Oil Refilling Pump and Adaptor Set - VAG
Used to drain and add automatic transmission oil,
using a variety of transmission oil change tools,
effectively solving the transmission oil change problem.
Compatible : 0CK / 0B5 Dual Clutch on Audi and VW vehicles
OEM Codes :VAS6617/12 | VAS6617/3 | VAS6617/5 | VAS6617/6
VAS6617/7 | VAS6617/8 | VAS6617/9 | VAS6617/10.

72mm Oil Filter Wrench
for Ford 1.0 | 1.1 | 2.0 EcoBoost Engines
14 Flutes | 1/2in.Dr
For most Ford models.

Automotive Lower Control Arm & Ball Joint Removal Tool
Suitable for a wide range of vehicle makes and models,
making it an essential addition to any automotive toolkit.
Engineered to simplify the removal process,
reducing the time and effort required for suspension repairs.
Precisely position and pry the lower control arm to separate
the lower ball joint, minimizing the risk of damage during removal.
Heavy Duty for longevity even in demanding environments.

JLR Heavy Duty Ball Joint Separator
For Land Rover and Jaguar Vehicles.
Inner opening : 31mm | Outer opening : 52mm.
Upper jaw length : 215mm | Lower jaw length : 220mm.
Scissor type design enables the ball joint to be easily separated.
Land Rover Discovery V from 2016 | Chassis code : L462
Range Rover IV from 2012 | Chassis code : L4605
Range Rover Sport II from 2013 | Chassis code : L494
OEM Code : 204-793A.

Brake Fluid / Coolant Boiling Point Tester
For detecting the boiling point of brake fluid to judge
the quality of brake fluid is closely related to driving safety.
Applicable brake fluid : DOT3 | DOT4 | DOT5 | DOT5.1
Detection Range : 90 - 350 degrees C
Testing Time :
Brake fluid <90 seconds
Coolant <60 seconds
Power Supply : DC12V suitable for car batteries
Operating Temperature Range : 0 - 50 degrees C

Brake Pipe Bender and Clamp Set
Diameters : 4.75 - 6mm | 3/16 - 1/4in.
Steel, copper, cupro-nickel and plastic coated pipes
With 2 mini pipe benders
For use with a 6mm hex key or a 1/4in.Dr Ratchet / not included.
Designed for clamping brake pipes in-situ,
enabling the new pipe to be held next to the existing pipe,
so that the replacement can be shaped
to replicate the one that its replacing.

Tube Straightener
For straightening tubing from 3/16in. to 1in. diameter.
Equipped with double precision bearings and sturdy nylon rollers,
guaranteeing a smooth process for brake and fuel line pipes.
Suitable for a wide variety of materials, including
soft Aluminium, Copper, Plastic and brake line tubing.
Ideal for multiple applications in automotive and HVAC systems.

2pc Impact Socket Set - 1/2in.Dr
With Protective Sleeves for damaged wheel nuts
20.5mm for wheel nuts with missing chrome cap
21.5mm for wheel nuts with deformed chrome cap
Depth : 85mm

Motorcycle Chain Alignment Tool
Attaches directly to the rear sprocket using screws.
The positioning rod automatically aligns with the chain
to ensure precise alignment and help prevent premature wear
of the chain and sprockets.
Suitable for motorcycles and ATVs.

Yellow Dent Reflector Line Board
Board Size : 200 x 240mm
350mm articulated arm with 70mm suction cup

White Dent Reflector Line Board
Board Size : 200 x 240mm
350mm articulated arm with 70mm suction cup

LED Light Dent Repair Line Board
Reflection of LED lines reveal even the smallest dents.
Adjustable arm lever and strong suction cup base.
Size : 270 x 150mm
Flexible Arm : 370mm length
Power Supply : DC 5V
3m USB Cable included.
Easy-to-use lamp.
USB output : DC 5V /1 Amp

LED Light Line Board
Quickly and accurately find where a dent is located.
Three light sources can be independently turned on and off,
offering moderate brightness options.
Adjustable arm lever and strong suction cup base.
Board Size :360 x 180mm
Flexible Arm : 320mm length
Power supply : DC 5V
5m USB Cable included.
USB Output : DC 5V /1 Amp

800mm Dent Mirror
Ideal for better identification of dents and bumps,
e.g. hail damage, stone-chipping or small parking damages.
Asymmetric lines for precise detection of minor deformations.
Suitable for mobile use, folds in seconds
With plastic handle and storage pouch.

26pc Screw Extractor Set
With extractor tools for different applications.
Twist Sockets : 10 | 11 | 12 | 13 | 14 | 16 | 17 | 19mm
1/4 | 5/16 | 1/2 | 3/8 | 11/16in. with Spiral Profile
Twist Drills : 3/32 | 1/8 | 5/32 | 1/4 | 9/32in. Diameter
Left-hand Extractors : 1 | 2 | 3 | 4 | 5
Nut Splitters : 12 - 16mm | 16 - 22 mm
Drill Adaptor :1/4in.Dr to 3/8in.Dr
For removing damaged / defective bolts, nuts and Screws.

5pc Bolt Extractor Set
Sizes : 19 | 21 | 22 | 24 | 25mm
3/4 | 13/16 | 7/8 | 15/16 | 1in.
1/2in.Drive
Designed for use with manual or impact wrenches.
For extracting damaged or rusted bolts, nuts and screws.

7pc Lug Nut Flip Socket Set - 1/2in.Dr
Dual Sockets : 17mm | 19mm | 21mm | 13/16 | 7/8in.
Rod and Extension Bar : 75mm
Designed for use with manual or impact wrenches
For Standard Hex Wheel Nuts
or damaged bolts, nuts and Studs.
Chrome-Molybdenum

6pc Double Sided Lug Nut Extractor Set
1/2in.Dr Double Sided Impact Socket Set
Sizes : 17 | 19 | 21 | 22 | 24 | 25 | 26 | 27mm
11/16 | 3/4 | 13/16 | 7/8 | 15/16 | 1 | 1-1/32 | 1-1/16in.
Rod and Extension Bar : 75mm
Chrome-Molybdenum
Designed for use with manual or impact wrenches
Easily remove damaged bolts, nuts and screws
without damaging fastener edges.

14pc Bolt Extractor Set
1/2'' Drive Sockets :
6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 19mm
with Rod
Designed for use with manual or impact wrenches
For loosening damaged Bolts, Nuts, Screws and Studs.
Chrome-Molybdenum

10pc Bolt Extractor Set
Sockets : 14 | 16 | 17 | 19 | 21 | 22 | 24 | 27mm
1/2'' Drive Adaptor and Rod
Designed for use with manual or impact wrenches
For loosening damaged Bolts, Nuts, Screws and Studs.
Chrome-Molybdenum

Suction Cup - 50Kg
with Aluminium Die Cast Body
Pad Diameter : 123mm
Maximum vertical suction: 50kg
Ideal for carrying large, heavy and awkward to handle materials.
Easy to operate suction vacuum controlled by the locking handle.
Designed for easy handling of non-porous tiles,
marble, glass, plastic & sheet metals.

Suction Cup Lifter with 2 Cups
Aluminium Die Cast Body.
Cup Diameter : 118mm
Lifting Capacity : 120kg
Quick release design for easy use.
Ideal for all kinds of smooth materials,
such as ceramic tiles, glass, wood floors, etc.
Designed for effortless transportation of a various items,
including tiles, glass panels, and mirrors.

Angle Adjustable Suction Cup Lifter
Aluminium Die Cast Body
Pad Diameter : 118mm
Maximum Vertical Lifting : 100kg
Adjustable Angle : 90 - 270 degrees
Can be used at multiple angles
allowing for seaming and levelling of flat surfaces.
Quick release design for easy use.
Ideal for all kinds of smooth materials,
such as ceramic tiles, glass, wood floors, etc.

Vacuum Suction Cup with Digital Display
The clear and easy-to-read LCD display shows the
suction power and battery status in real time.
With auto air pump.
Vertical suction up to 220kg
Rubber Diameter : 220mm
Voltage : 3.7V DC
Power : 3W

Foam Seal for CT6915
Size : 205 x 135 x 8mm
Replacement Foam Seal for
Vacuum Suction Cup with Digital Display.
For use on coarse surface.

High Performance Propane Blow Torch Kit
With 4 interchangeable tips :
Pin-point Flame, Standard Cyclone Flame,
Soft Flame for shrinking, Jumbo Cyclone Flame.
Piezo ignition allows torch to be lit at any angle.
Flame Temperature : 1600 - 1800 degrees C.
Ergonomic handle with 45 degree angled head,
locked burner system & safety lock button for continuous use.
Suitable for 400g Propane Cylinders.
For brazing ,annealing, soldering, low temperature welding & heat shrinking.

Rechargeable LED Work Light and Torch
Bulb : SMD + COB
Battery : 3.7V | 1200mAh
Charging Time : 2.5hrs
Switch Functions : COB Low / High | SMD | Off
Light Output : 50LM | 200LM | 50LM
Charging Port : Type-C
Adaptor : DC 5V / 1A
Charging Indicator : 4 Power indicators
Ideal for automotive inspection and various other tasks

Super Slim Inspection Light with Flexible Neck
Battery : 3.7V / 2500mAh Lithium
5W High power COB LED | 2W High power LED torch
Luminance : Max. 600LM Front Main | Max. 170LM Top Torch
Runtime : 3 - 30H Light | 8 - 50H Torch
Charging Port : Type-C
Adaptor : DC 5V / 1A
Dimming switch : 10 - 100 percent
Charging period : approx. 3.5h
Slim profile ideal for narrow and difficult access areas.

Super Bright Slim Folding Inspection Light SMD
Battery : 3.7V | 2500mAh Lithium
LED : 10W High power COB LED | 2WHigh power LED torch
Luminance : Max. 1000LM Front Main | Max. 150LM Top Torch
Ambient Temperature : minus 10 - plus 45 degrees C
Runtime : 3- 12H Light | 9H Torch
Charging Port : Type-C
Adaptor : DC 5V / 1A
Charging period : approx. 3.5h
Slim profile ideal for narrow and difficult access areas.

35mm Magnetic Core Drilling Machine
Suitable for Annular Cutters
Rated Voltage : 230V
Rated Frequency : 50 / 60Hz
Rated Power : 1500W
Max. Attraction : 14000N
Core Drilling Diameter : 35mm
Cutting Depth : 30mm
Stroke : 160mm

80mm Magnetic Core Drilling Machine
Suitable for Twist Drills and Annular Cutters
Rated Voltage : 220 - 240V
Rated Frequency : 50 / 60Hz
Rated Power : 1950W
Max. Attraction : 16700N
Core Drilling Diameter : 80mm
Twist Drill : 28mm
Cutting Depth : 50mm
Stroke : 185mm

SDS Drill Bit Holder
with Heavy Duty Locking Carabiner

Keep your drill bits within easy reach.
Suitable for 10mm shank SDS Plus drill bits.
Allows easy one-handed access and quick replacement,
perfect for aerial work, ensuring seamless transfer of Drills,
Screwdrivers and Bits. Easily clips to your belt or tool bag.

4 x 110mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

5 x 110mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

5.5 x 110mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

6 x 110mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

6.5 x 110mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

7 x 110mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

8 x 110mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

9 x 110mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

10 x 110mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

4 x 160mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

5 x 160mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

6 x 160mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

6.5 x 160mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

7 x 160mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

8 x 160mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

9 x 160mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

10 x 160mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

11 x 160mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

12 x 160mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

13 x 160mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

14 x 160mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

15 x 160mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

16 x 160mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

5 x 210mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

5.5 x 210mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

6 x 210mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

6.5 x 210mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

7 x 210mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

8 x 210mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

9 x 210mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

10 x 210mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

11 x 210mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

12 x 210mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

13 x 210mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

14 x 210mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

15 x 210mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

16 x 210mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

18 x 210mm - SDS-Plus Hammer Drill
with Cross Cutter Tip

12pc Sanding Belt Set
Flexible-Durable Aluminium Oxide Sanding Belts
For all 13 x 457mm Belt Sanders
Grit : 80 | 120 | 180 | 240
Suitable for CT7052

Square Tooth Long Trowel - 120 x 480mm
Stainless Steel Blade with Aluminium Handle.
For easy and smooth surfaces on both walls and floors.
Plate Size : 120 x 480mm with 10 x 10mm notches.
Great for applying and spreading mortar, screed,
adhesive onto various types of surfaces.

Square Tooth Long Trowel - 120 x 600mm
Stainless Steel Blade with Aluminium Handle.
For easy and smooth surfaces on both walls and floors.
Plate Size : 120 x 600mm with 10 x 10mm notches.
Great for applying and spreading mortar, screed,
adhesive onto various types of surfaces.

Stainless Steel Trowel
Plate size : 115 x 800mm
Designed to handle large tiles with ease.
With its 10 x 10mm notches, it can plaster large areas seamlessly
and can install large tiles with precision.
The baffles on both sides of the trowel can prevent mortar, tile glue
or putty from overflowing and quickly spread evenly.

Vacuum Suction Lifter for Large Format Tiles
With 6 heavy duty battery powered vacuum suction cups.
Reinforced aluminium alloy profile with Telescopic adjustable guide rail.
Max. total suction up to 200kgs.
Suitable for Max. 3200 x 1600mm porcelain slab.
Battery : 3.7V DC 2000mAh
Power : 3W
Max. pressure value : 60Kpa
Charging mode : USB Type-C
Protects stone or glass tiles from breaking during transport and installation.