11pc Ball Joint Separator / Pneumatic Impact Set
Ball Joint Thread Sizes :
M10 x 1.25mm | M10 x 1.5mm | M12 x 1.25mm | M12 x 1.5mm
M12 x 1.75mm | M14 x 1.5mm | M14 x 2.0mm | M16 x 1.5mm.
Air Hammer Punches.
17mm Hex Punch to align the impact gun where required.
This tool simplifies ball joint separation.
Its adaptors screw into the joint thread in place of the nut,
seating firmly against the thread end.
An air impact hammer may be used with the included punches
rapidly vibrating the taper joint loose.