Control Arm Supporting Tool
For transmission jacks featuring a maximum piston diameter of 30mm
and offering a universal fit for wheel hubs with bolt circle diameters of
5 x 130mm | 5 x 120mm | 5 x 112mm | 5 x 100mm
and other configurations.
It provides secure support via the wheel studs or wheel nuts,
ensuring controlled and stable lowering and raising of control arms
or axles to the required positions.

11pc Ball Joint Separator / Pneumatic Impact Set
Ball Joint Thread Sizes :
M10 x 1.25mm | M10 x 1.5mm | M12 x 1.25mm | M12 x 1.5mm
M12 x 1.75mm | M14 x 1.5mm | M14 x 2.0mm | M16 x 1.5mm.
Air Hammer Punches.
17mm Hex Punch to align the impact gun where required.

3pc Universal Brake Disc Run Out Kit
Allows the DTi gauge to be mounted in almost any position
against the brake disc to measure disc warp.
DTi Gauge accurate to 0.01mm / total deflection 10mm.
The Locking pliers allow fixing to suspension bracket or component part
Segmented Steel Mounting Post can be bent and locked into position.
Measures brake disc drive flange or any rotating component run-out.
Can be used on motorcycles.

10T Hydraulic Wheel Hub Removal Kit
For separating the transmission shaft from the hub.
Hydraulic cylinder head - up to 10-tonne capacity.
High-pressure Hose and Five-hole Hub Axle Plate.
Extension screws : 5 x M14 x 1.5 | 5 x M12 x 1.5.
Screws : 5 x M14 x 1.25 | 5 x M14 x 1.5.
Nuts : 5 x M14 x 1.25 | 5 x M14 x 1.5.
Magnetic spacer plates.
Extension adaptor.
Quick-connect coupler.

11pc Locking Wheel Nut Key Set - Toyota
For dismantling Toyota Rim Locks.
10 Different Sockets compatible with some Toyota models :
A | B | C | D | E | F | G | H | I | J.
17mm Impact Socket 1/2in.Dr with protective sleeve
Chrome-Molybdenum

Wheel Stud Extraction / Fitting Tool Set
for Cars and Vans - BMW, Chrysler, Ford, Hyundai, Kia, Mazda
Mercedes-Benz, Mitsubishi, PSA and VW Group models.
Threaded Sockets : M12 x 1.25 | M12 x 1.5 | M14 x 1.5.
Extraction Air Punch
Fitting Bearing.
Use Air Chisel for Extraction
Use 21mm Socket for Insertion.
Chrome Molybdenum

4pc Wheel Budd Internal Thread Restoring Kit
For Use on Vehicles that use Budd Wheel Nuts
M12 x 1.25 for PSA
M12 x 1.5 for BMW
M12 x 1.5 for Mercedes
M12 x 1.75 for Volvo
M14 x 1.5 for VAG Vehicles

3/8in.Dr Air Impact Wrench
Torque :102Nm
Free Speed : 10000rpm
Air Pressure : 6.3bar
Air consumption : 3.5cfm
Air Inlet : 1/4in. BSP / Hose : 3/8in.

1/4in. / 6mm Air Die Grinder
Free Speed : 22000 rpm
Max Air pressure : 6.3 bar
Air consumption : 4.5 cfm
Air Inlet : 1/4in. BSP
Hose Size : 3/8in

Spray Gun and Paint Tank Kit
High pressure spray gun
with 2 litre Tank and Regulator.
Max Working Pressure : 4 bar
Nozzle : 1.8mm
80in. x 1/2in. Air Hose with 1/4in. fitting
80in. x 1/2in Paint hose with 3/8in. fitting

5 in 1 Safety Exhaust Air Line Coupler
Quick connect coupling for safe and easy air hose connection.
Safely bleeds off air pressure before releasing connector.
1/4in.BSP Female / Max working pressure : 300psi
Accepts all major interchanges :
Industrial / M-Style
High Flow / V-Style
Automotive / T-Style
ARO / A-Style
Lincoln / L-Style

5 in 1 Safety Exhaust Air Line Coupler
Quick connect coupling for safe and easy air hose connection.
Safely bleeds off air pressure before releasing connector.
1/4in.BSP Male / Max working pressure : 300psi
Accepts all major interchanges :
Industrial / M-Style
High Flow / V-Style
Automotive / T-Style
ARO / A-Style
Lincoln / L-Style

Air Blow Gun Set with Quick Change Nozzles
Universal Blow Gun for drying and cleaning surfaces or components
Extensively equipped with 5 separate nozzle attachments
for different applications and work areas.
Air Blow Gun with quick change function.
Nozzles : 100mm | 300mm | 500mm.
Nozzle Covers / Rubber.
Plastic Nozzle : 100mm.
Turbo Venturi Nozzle - wide beam function.
Air Inlet : 1/4in. / 6.3mm

2pc Tyre Bead Breaker and Lever Tool Set - 16in.
Multi-use Heavy Duty workshop Tyre Tool Set
for breaking the bead on most street / off road motorcycle tyres
Integrated tyre spoons for tyre removal and installation
16 inch long handles make removing and installing tyres a breeze
Ergonomic design with cross guard to keep hand from riding forward.
Chrome-Molybdenum

2 Ton Hand Puller
Dual-Gear operation for smooth controlled pulling.
2 x Steel Hooks with safety latches for firm grip.
Pulling Capacity : 2 Ton Max.
Cable Length : 2m
Cable Diameter : 4.5mm
Ideal for fencing, tree stump removal and
miscellaneous installation or alignment tasks.

Flexible Magnetic Mat
Size : 320 x 250 x 7mm holds up to 17kg.
Made from wear-resistant leather effect PVC.
Protects both tools and surfaces from scratches, marks, and damage.
Keeps tools, fixings, and components securely in place,
flexible design allows it to bend, fold, or wrap around curved surfaces,
while also laying flat for easy storage.
Ideal for use on vehicles, toolboxes, or any ferrous surface,
offers convenient and organised storage for small tools and parts.

Socket Storage Tray : 1/4in. | 3/8in. | 1/2in. Drive
Size : 520 x 118mm
Holds up to 40 sockets :
14 x 1/4in.clips | 14 x 3/8in.clips | 12 x 1/2in.clips
Each ABS clip rotates 360 degrees
and includes a ball bearing for secure retention.
Individual rails can be removed or switched for customization.

9pc Master Hook Tool Set
Ideal for removing O Rings and Seals.
Straight Hook
Straight Hook - Large
45? Offset Hook
90? Offset Bent Hook - Large
135? Bent Hook
Sickle Hook - Large
S-shape T-Hook 120mm - Small
S-shape T-Hook 165mm - Large

Windscreen Wiper Lever Tool
For allowing the quick and easy removal of wiper arms.
With hook and lever or hook and pull action.
Place hook under the base of the wiper arm then
place the pivot point on the spindle and squeeze while lifting the arm.

6pc Socket Adaptor Set - Colour Coded
1/4in. Hex Shank with 1/4 | 3/8 | 1/2in. Drive
Length : 75mm and 150mm

Electric Belt Sander
Rated Voltage : 230 | 50Hz | 260W
Belt Speed : 330 - 550m/min
Sanding Belt Size : 13 x 457mm
Sanding Paper : 80 / 120 / 180 / 240 Grit
Protection Class : II
Angle of sanding adjustable up to 45 degrees
Ideal for use in body shops - sanding in accessible areas

12pc Sanding Belt Set
Flexible-Durable Aluminium Oxide Sanding Belts
For all 13 x 457mm Belt Sanders
Grit : 80 | 120 | 180 | 240
Suitable for CT7052 - 230V Belt Sander

Rotary Abrasive Hub Cleaning Disc
or Grinding Wheel
With raised centre for fast effective cleaning
of inner wheel central contact surfaces.
Optional Disc for CT6185 Rotary Abrasive Hub Cleaning Tool
Inner diameter : 90mm / Outer diameter 150mm

16oz Ball-pein Hammer
High Grade Steel Head
High Quality Fibreglass Shaft
and Thermoplastic Rubber Grip

Door Stand - 600mm wide
Adjustable clamp for doors - 32mm to 55mm thick.
Non-scratch wide base supports doors securely in an upright position.
Features a simple screw clamp with large clamping pad
to protect the door face from damage.
Holds doors up to 58kg in weight, ideal for heavy duty fire doors.
Non-marring pads protect both the floor surface and door.
Safely holds the door on its edges while planing or
cutting to size and fitting hinges, locks and furniture.

1.5M Drain Cleaner
Flexi-wire with Handle and 'Cork Screw' end
Waste Pipe Un-Blocker

5M Flexible Drain / Waste Pipe Un-Blocker
Head Size : 17mm
Coil Diameter : 10mm
5M reach for improved access.
Robust coiled steel construction for effective unblocking.
Cranked handle for improved blockage clearance.

Water Pressure Test Gauge
For accurately measuring mains water pressure,
helps diagnose plumbing issues, compatible with most taps.
Corrosion Resistant Pressure Gauge with
Braided Stainless Steel Hose : 300mm
Pressure range : 0 - 160psi / 0 - 11bar
Tap Fitting : 3/4in. BSP
1/2in. Adaptor

Dual Sealant Gun for 225 / 250ML
Cartridge gun for two-component adhesives
with quick-change plastic pressure plates.
Ergonomic design for comfortable working
with minimal trigger pressure.

Hub Fan Blade Blower Wheel Puller
Specialized HVAC maintenance tool used to easily
remove stubborn or rusted-on fan blades
and blower wheels from motor shafts
With Puller / Forcing Screw
Hex Wrench / Hooks and Fixing Screws

5M / 16ft Push Lock / Bottom Lock Measuring Tape
Blade width : 32mm | Thickness : 0.14mm.
Nylon coated thicker blade printed on both sides.
32mm dedicated magnetic hook.
Non-slip stop, convenient in using.
High precision and high wear resistance.
With Magnetic Tip.

8M / 26ft Push Lock / Bottom Lock Measuring Tape
Blade width : 32mm | Thickness : 0.14mm.
Nylon coated thicker blade printed on both sides.
32mm dedicated magnetic hook.
Non-slip stop, convenient in using.
High precision and high wear resistance.
With Magnetic Tip.

10M / 33ft Push Lock / Bottom Lock Measuring Tape
Blade width : 32mm | Thickness : 0.12mm.
Nylon coated thicker blade printed on both sides.
32mm dedicated magnetic hook.
Non-slip stop, convenient in using.
High precision and high wear resistance.
With Magnetic Tip.

5M / 16ft Tape Measure
with 25mm Blade
and 90 degree Laser
45 / 90 degree levels

8M / 27ft Tape Measure
with 25mm Blade
and 90 degree Laser
45 / 90 degree levels

230 x 160mm Adjustable Square / Angle Tool
Ideal for setting out accurate corners
and reveals around windows and frames.
Stainless Steel - Rust-free.

6in. / 150mm Steel Spring Clip
with approx. 45mm Jaw Opening

Hi-Vis Vest - Medium
100% Polyester with Reflective Tape
EN471 : 2003

Yellow Vest - one size
100% Polyester with Reflective Tape
EN471:2003
ANSI 107-2004