Control Arm Supporting Tool
For transmission jacks featuring a maximum piston diameter of 30mm
and offering a universal fit for wheel hubs with bolt circle diameters of
5 x 130mm | 5 x 120mm | 5 x 112mm | 5 x 100mm
and other configurations.
It provides secure support via the wheel studs or wheel nuts,
ensuring controlled and stable lowering and raising of control arms
or axles to the required positions.

Inner Axle Side Seal Installation Tool
for DANA 30 / 40 / 60 Front Differentials
found on Chevrolet, Dodge, Ford, GMC,
International Scout, Jaguar, Isuzu Rodeo,
Jeep, Mercury Mariner, Volvo and more.
Helps install inner front axle seal to the proper depth.
Provides safe and even pressure to the inner axle seal
to press it into the axle housing without damaging the seal.
The puck features different inner and outer dimensions,
making it suitable for pressing a wide range of seals.

3pc Ball Joint Removal Set
Low profile set suitable for most vehicles.
Features forged steel body and hardened screw with thrust ball.
23mm | 28mm | 34mm for various vehicles.

25pc Ball Joint Service Master Adaptor Set
For use on all cars and light trucks that have press-fit type ball joints
C-Frame | Forcing Screw | Installation Adaptor | Removal Adaptor
Installation and Removal Cups
Receiving Tubes

11pc Ball Joint Separator / Pneumatic Impact Set
Ball Joint Thread Sizes :
M10 x 1.25mm | M10 x 1.5mm | M12 x 1.25mm | M12 x 1.5mm
M12 x 1.75mm | M14 x 1.5mm | M14 x 2.0mm | M16 x 1.5mm.
Air Hammer Punches.
17mm Hex Punch to align the impact gun where required.

6pc VAG Sub-Frame Locating Pin Set
Used to keep alignment of the sub-frame during reassembly.
Size : M12 x 1.5mm x H5 | M10 x 1.5mm x H5.
OEM Codes : T10486A | T10227.
Compatible with VW / Audi vehicles.

Universal Manual Coil Spring Compressor
Specifically designed for MacPherson struts on both
front and rear axles across a wide range of vehicles.
Torque Multiplier
Transmission ratio : 1:5
Screw body length : 450mm
Maximum clamping force : 2300kg
Jaw range : 100 - 265mm
Drive : 24 mm Hex
Suitable for a wide range of makes and models.

11pc Brake Bleeding Thru? Socket Set - VAG vehicles
For bleeding the brakes without dismantling the wheels.
With Tool Handle - 9 x 12mm push fit connector.
17mm Ratchet Ring Spanner Swivel Head
Through Sockets : 7 | 10 | 11mm / Lengths : 29mm - 85mm
Silicone bleeder hose with return valve : 1200mm
which prevents used brake fluid from running back
as well as air that has been pumped out

3pc Universal Brake Disc Run Out Kit
Allows the DTi gauge to be mounted in almost any position
against the brake disc to measure disc warp.
DTi Gauge accurate to 0.01mm / total deflection 10mm.
The Locking pliers allow fixing to suspension bracket or component part
Segmented Steel Mounting Post can be bent and locked into position.
Measures brake disc drive flange or any rotating component run-out.
Can be used on motorcycles.

E20 Brake Caliper Socket for MAN / TGL
For the dismantling and assembly of brake line fittings.
30mm Hex drive with spring ball.
Chrome-Vanadium

E24 Brake Caliper Socket for MAN / TGL
For the dismantling and assembly of brake line fittings.
30mm Hex drive with spring ball.
Chrome-Vanadium

13mm SAF Brake Disc Socket - 12 point
Designed for the dismantling and assembly of brake discs.
External hexagon drive : 19mm
For machinery usage
Chrome-Molybdenum

15mm SAF Brake Disc Socket - 12 point
Designed for the dismantling and assembly of brake discs.
External hexagon drive : 19mm
For machinery usage
Chrome-Molybdenum

44pc Master BMW Locking Wheel Nut Key Set
Keys : 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49
50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | 60
Unique Bits : 11/15PT | 12/14PT | 13/16PT | 14/12PT
15/11PT | 16/10PT | 17/7PT | 18/13PT | 19/8PT | 20/9PT
30/13PT | 31/15PT | 32/16PT | 33/17PT | 34/18PT
35/19PT | 36/20PT | 37/21PT | 38/22PT | 40/23PT.
With Socket / Adaptor / Puller and Punch.
Chrome-Molybdenum

66pc Master VAG Locking Wheel Nut Key Set
Keys : A | B | C | E | F | G | H | I | J | L
M | N | O | Q | R | S | T | V | W | X
Keys : 521 | 522 | 523 | 524 | 525 | 526 | 527 | 528 | 529
530 | 531 | 532 | 533 | 534 | 535 | 536 | 537 | 538 | 539 | 540
Unique Bits : 51/6PT | 52/7PT | 53/8PT | 54/9PT | 55/10PT
56/11PT | 57/12PT | 58/13PT | 59/14PT | 60/15PT | 61/16PT | 62/17PT
ABC0/10PT | ABC1/11PT | ABC2/13PT | ABC3/14PT | ABC4/15PT
ABC5/16PT | ABC6/17PT | ABC7/19PT | ABC8/20PT | ABC9/21PT.
With Socket / Adaptor / Puller and Punch.

21pc Locking Wheel Nut Key Set for Volvo B
Covers a wide range of Volvo wheel nuts
for use where the original key is missing or lost.
Applicable to : S60 | XC60 | V70 | XC70 | S80 | XC90.
Key Numbers : 065P | 071P | 072P | 076P | 079P
121P | 651P | 944L | 944P | 945L | 945P | 946L
947L | 948L | 949L | 950L | 951L | 951P | 952L | 953L
Impact Socket : 17mm / 1/2in.Dr
Chrome-Molybdenum

10pc Wheel Nut Impact Socket Set - 1/2in.Dr
with Thin Walls and Protective Sleeves for Alloy Wheels
Sizes : 15 | 17 | 19 | 21 | 23 | 24mm
with 17mm and 21mm Convex Flower
Colour Coded / Chrome Molybdenum

15pc Locking Wheel Nut Removal Kit
Sockets / outer diameter : 26 | 27 | 28 | 28.8 | 28.9
30.0 | 30.9 | 31.8 | 34.8 | 35.8 | 36.8mm.
Nut Connectors : H16 x H19 | H19 x H22
Replacement Drift Punches.
Use where the original key is missing or the wheel nut is damaged.
Provides a quick and efficient solution to remove locking wheel nuts.
Chrome-Molybdenum

Wheel Stud Extraction / Fitting Tool Set
for Cars and Vans - BMW, Chrysler, Ford, Hyundai, Kia, Mazda
Mercedes-Benz, Mitsubishi, PSA and VW Group models.
Threaded Sockets : M12 x 1.25 | M12 x 1.5 | M14 x 1.5.
Extraction Air Punch
Fitting Bearing.
Use Air Chisel for Extraction
Use 21mm Socket for Insertion.
Chrome Molybdenum

4pc Wheel Budd Internal Thread Restoring Kit
For Use on Vehicles that use Budd Wheel Nuts
M12 x 1.25 for PSA
M12 x 1.5 for BMW
M12 x 1.5 for Mercedes
M12 x 1.75 for Volvo
M14 x 1.5 for VAG Vehicles

4pc Dual Wheel Separator Kit
Ideally suited to release fixed twin wheels on HGV and LCV vehicles
Also ideal as on-board tool for breakdown service.
Saves time when removing corroded wheels.
Contents :
Spindle with Inner Bearing - 230mm
Pressure Piece - 44mm diameter
Removable Nut - 50mm diameter
Removable Nut - 48mm diameter

Spray Gun and Paint Tank Kit
High pressure spray gun
with 2 litre Tank and Regulator.
Max Working Pressure : 4 bar
Nozzle : 1.8mm
80in. x 1/2in. Air Hose with 1/4in. fitting
80in. x 1/2in Paint hose with 3/8in. fitting

Winch Installation Stand
Heavy duty installation stand engineered for
secure mounting of 5000lb - 6000lb winches.
Robust steel construction provides stable support
during winch installation and removal.
Designed for workshop and field use,
this stand accommodates standard winch footprints
and simplifies maintenance access.
Essential equipment for professional installers and
automotive workshops handling medium-capacity winch systems.

Winch Installation Stand
Heavy duty installation stand engineered for
secure mounting of 8000lb - 9000lb winches.
Robust steel construction provides stable support
during winch installation and removal.
Designed for workshop and field use,
this stand accommodates standard winch footprints
and simplifies maintenance access.
Essential equipment for professional installers and
automotive workshops handling medium-capacity winch systems.

Flexible Magnetic Mat
Size : 320 x 250 x 7mm holds up to 17kg.
Made from wear-resistant leather effect PVC.
Protects both tools and surfaces from scratches, marks, and damage.
Keeps tools, fixings, and components securely in place,
flexible design allows it to bend, fold, or wrap around curved surfaces,
while also laying flat for easy storage.
Ideal for use on vehicles, toolboxes, or any ferrous surface,
offers convenient and organised storage for small tools and parts.

Socket Storage Tray : 1/4in. | 3/8in. | 1/2in. Drive
Size : 520 x 118mm
Holds up to 40 sockets :
14 x 1/4in.clips | 14 x 3/8in.clips | 12 x 1/2in.clips
Each ABS clip rotates 360 degrees
and includes a ball bearing for secure retention.
Individual rails can be removed or switched for customization.

20pc Parking Sensor Hole Cutter Set
For cutting precise PDC sensor holes in bumpers up to 5mm thick
Provides clean damage free holes in painted bumpers.
Suitable for use on a wide range of vehicles.
13mm Hex Nut Driver Drill Bit | 6-point Socket | 1/4in. Hex Shank
Cutter Sizes : 17 | 18 | 18.2 | 19 | 20 | 22.5 | 24
26 | 26.7 | 27 | 28.1 | 29.3 | 32 | 34 | 38 | 38.9mm.
Punching Tool Spindle with Nut.
HSS Drill Bit / 8mm diameter.
Die.

13pc Bolt Extractor Set - 3/8in.Dr
Sizes 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19mm
Adaptor : 1/2in.F x 3/8in.M
For loosening and removing seized nuts and bolts
with damaged or up to 85 percent rounded heads.
Also suitable for use on intact fasteners.
Intended for manual operation
Chrome-Vanadium
Plus Socket Rail.

5pc Large Tap Socket Set
For : 5/8in. / 16mm | 11/16in. / 18mm / 3/4in.
7/8in. / 22mm | 1in. / 25mm Taps,
With magnet for holding the tap
This set allows users to tap threads in tight or hard-to-reach areas.
Used with a standard ratchet, T-handle, or extension,
making the set highly compatible with a range of tools.
Chrome-Molybdenum

56pc Master Thread Repair File / Tap and Die Kit
23 UNF / UNC Taps: 1/4 | 5/16 | 3/8 | 7/16 | 1/2 | 9/16in.
Metric : M6 x 1.0 - M14 x 1.5
28 UNF / UNC Dies : 1/4 | 5/16 | 3/8 | 7/16 | 1/2 | 9/16 | 5/8in.
Metric Dies : M6 x 1.0 - M14 x 1.5.
Thread Files : SAE / Metric
Thread Pitch Gauges : SAE / Metric

9pc Master Hook Tool Set
Ideal for removing O Rings and Seals.
Straight Hook
Straight Hook - Large
45 degree Offset Hook
90 degree Offset Bent Hook - Large
135 degree Bent Hook
Sickle Hook - Large
S-shape T-Hook 120mm - Small
S-shape T-Hook 165mm - Large

Rotary Abrasive Hub Cleaning Disc
or Grinding Wheel
With raised centre for fast effective cleaning
of inner wheel central contact surfaces.
Optional Disc for CT6185 Rotary Abrasive Hub Cleaning Tool
Inner diameter : 90mm / Outer diameter 150mm

Dual Sealant Gun for 225 / 250ML
Cartridge gun for two-component adhesives
with quick-change plastic pressure plates.
Ergonomic design for comfortable working
with minimal trigger pressure.

5M / 16ft Push Lock / Bottom Lock Measuring Tape
Blade width : 32mm | Thickness : 0.14mm.
Nylon coated thicker blade printed on both sides.
32mm dedicated magnetic hook.
Non-slip stop, convenient in using.
High precision and high wear resistance.
With Magnetic Tip.

8M / 26ft Push Lock / Bottom Lock Measuring Tape
Blade width : 32mm | Thickness : 0.14mm.
Nylon coated thicker blade printed on both sides.
32mm dedicated magnetic hook.
Non-slip stop, convenient in using.
High precision and high wear resistance.
With Magnetic Tip.

10M / 33ft Push Lock / Bottom Lock Measuring Tape
Blade width : 32mm | Thickness : 0.12mm.
Nylon coated thicker blade printed on both sides.
32mm dedicated magnetic hook.
Non-slip stop, convenient in using.
High precision and high wear resistance.
With Magnetic Tip.

5M / 16ft Tape Measure
with 25mm Blade
and 90 degree Laser
45 / 90 degree levels

8M / 27ft Tape Measure
with 25mm Blade
and 90 degree Laser
45 / 90 degree levels