VAG Timing Adaptor Kit
For 1.0 | 1.2 | 1.4 TSi Petrol Engines
Mounting Spacers and Screws for Adaptor Plate
Inlet Camshaft Spacer Boss
Exhaust Camshaft Spacer Boss
Inclinometer Reference Bar - see CT6751
TSi ACT | EA211 3 and 4 cylinder without ACT

VAG Timing Adaptor Kit
For 1.4 CPTA / CZDB / CZEA TSi Petrol
Exhaust Camshaft Adaptor
1.4 TFSI COD / TSI ACT / TFSI / BlueGT TSI ACT
Applicable to : Audi / Skoda / Volkswagen

VAG Timing Adaptor Kit
For 1.0 | 1.5 | 1.6 TSi Petrol Engines
Inlet Camshaft Adaptor
Inlet Camshaft Spacer Boss - Long
Inlet Camshaft Spacer Boss - Short

Transmission Oil Refilling Pump and Adaptor Set - VAG
Used to drain and add automatic transmission oil,
using a variety of transmission oil change tools,
effectively solving the transmission oil change problem.
Compatible : 0CK / 0B5 Dual Clutch on Audi and VW vehicles
OEM Codes :VAS6617/12 | VAS6617/3 | VAS6617/5 | VAS6617/6
VAS6617/7 | VAS6617/8 | VAS6617/9 | VAS6617/10.

72mm Oil Filter Wrench
for Ford 1.0 | 1.1 | 2.0 EcoBoost Engines
14 Flutes | 1/2in.Dr
For most Ford models.

Extra Long Special Puller 10 - 50mm
for deeply seated bearings, gears, taps and bushes.
Maximum size of bearing: 50mm.
Arm spread : 10 to 50mm.
Reach : 230mm.
Self-centring force.
Drop forged legs with independent leaf springs.
Prevent damage to the shaft being pulled.
Work efficiency and time-saving effort.
Fine thread for easy use.

CV Boot Clamp Pliers for Toyota / Lexus
CV Axle Boot Clamp
Used to remove the locking straps on the automobile dust boot,
and it is perfect for closing the locking straps of the bushings.
The jaw can be adjusted freely by rotating the 13mm screw,
the maximum jaw opening length can reach 18mm,
offering versatile compatibility with various clamp sizes.
OEM Code : 09521-24010.

Automotive Lower Control Arm & Ball Joint Removal Tool
Suitable for a wide range of vehicle makes and models,
making it an essential addition to any automotive toolkit.
Engineered to simplify the removal process,
reducing the time and effort required for suspension repairs.
Precisely position and pry the lower control arm to separate
the lower ball joint, minimizing the risk of damage during removal.
Heavy Duty for longevity even in demanding environments.

JLR Heavy Duty Ball Joint Separator
For Land Rover and Jaguar Vehicles.
Inner opening : 31mm | Outer opening : 52mm.
Upper jaw length : 215mm | Lower jaw length : 220mm.
Scissor type design enables the ball joint to be easily separated.
Land Rover Discovery V from 2016 | Chassis code : L462
Range Rover IV from 2012 | Chassis code : L4605
Range Rover Sport II from 2013 | Chassis code : L494
OEM Code : 204-793A.

Brake Fluid / Coolant Boiling Point Tester
For detecting the boiling point of brake fluid to judge
the quality of brake fluid is closely related to driving safety.
Applicable brake fluid : DOT3 | DOT4 | DOT5 | DOT5.1
Detection Range : 90 - 350 degrees C
Testing Time :
Brake fluid <90 seconds
Coolant <60 seconds
Power Supply : DC12V suitable for car batteries
Operating Temperature Range : 0 - 50 degrees C

Brake Pipe Bender and Clamp Set
Diameters : 4.75 - 6mm | 3/16 - 1/4in.
Steel, copper, cupro-nickel and plastic coated pipes
With 2 mini pipe benders
For use with a 6mm hex key or a 1/4in.Dr Ratchet / not included.
Designed for clamping brake pipes in-situ,
enabling the new pipe to be held next to the existing pipe,
so that the replacement can be shaped
to replicate the one that its replacing.

Tube Straightener
For straightening tubing from 3/16in. to 1in. diameter.
Equipped with double precision bearings and sturdy nylon rollers,
guaranteeing a smooth process for brake and fuel line pipes.
Suitable for a wide variety of materials, including
soft Aluminium, Copper, Plastic and brake line tubing.
Ideal for multiple applications in automotive and HVAC systems.

Bearing Separator Puller Kit
For use with CT6292 - Ball Bearing Separator
Includes : 400mm Puller Cross Bar.
455mm Lead Screw with 1-1/8in.thread / 22mm Hex Head.
290mm Push-Puller Legs with 3/4in.thread.
270mm Extension Legs with 3/4in.thread.
For removing gears, pullers, bearings, steering wheels, etc.
Suitable for large bearing removal on vehicles, ATV's and light trucks.

2pc Impact Socket Set - 1/2in.Dr
With Protective Sleeves for damaged wheel nuts
20.5mm for wheel nuts with missing chrome cap
21.5mm for wheel nuts with deformed chrome cap
Depth : 85mm

16pc Socket Set
Wheel Socket and Hub Removal Cleaning Set
Wheel Nut Socket : 17mm - see CT3935
Wheel Nut Sockets : 17 | 19 | 21 | 22mm
Twist Sockets : 17 | 19 | 21 | 22mm
12mm Drift Punch.
Extension Bar : 75mm
Adaptor : 1/2in.Dr.
Adapters : 1/2in. square to M14 x 2.0
Wire Brushes : 65mm | 75mm

3pc Weighted Impact Socket Set
Sizes : 17 | 19 | 21mm / Single Hex - 6pt profile.
1/2 Inch Square Drive
Length : 97mm.
Designed for use on fixings that have a high torque setting.
Heavy Counter-Weighted design reduces impact loss
increasing the effective torque.
Applicable to, but not limited to :
Ford / GM / Honda / Jeep / Kia / Lexus / Mazda / Toyota vehicles.
Chrome-Molybdenum

Motorcycle Chain Alignment Tool
Attaches directly to the rear sprocket using screws.
The positioning rod automatically aligns with the chain
to ensure precise alignment and help prevent premature wear
of the chain and sprockets.
Suitable for motorcycles and ATVs.

14pc Motorcycle Fork Seal Driver Set
with Non-marring interchangeable plastic adaptors
allowing for use on forks from 35 to 50mm.
Designed to ensure that the oil seal is installed
at the correct angle on the front fork and is not easily damaged
Can be used for most conventional and upside down front forks
Adaptor Sizes :
35 / 36mm | 40 / 41mm | 42 / 43mm
45 / 46mm | 47 / 48mm | 49 / 50mm

Brake Shoe Tool for Volvo Trucks
Required when repairing the drum brakes.
Designed for opening and fixing the brake shoe retaining spring.
Also for the dismantling and assembling of the jaw pins.
Features drive spindle for continuous opening.
Applicable to ERF E Series and EC Series :
N7 | N10 | N12 | F7 | F12 | F16 | FH12 | FH16 | FL7 | FL10
OEM Code : 9998550.

Heavy Duty Engine Support Beam - 500Kg
Foot Width Adjustment : 1100 - 1800mm.
Maximum Load Capacity : 500kg.
Fore / Aft Adjustment Beams : 870mm long.
Chain Length : 850mm.
Fully adjustable.
Rubber Feet.

3pc Stackable Rolling Workshop Toolbox
Tool Trays containing -
1/4in.Dr and 1/2in.Dr Tools
Hex and Star Keys
Screwdrivers and Screwdriver Bits
Spanners and Pliers
Hammer and Rule

Yellow Dent Reflector Line Board
Board Size : 200 x 240mm
350mm articulated arm with 70mm suction cup

White Dent Reflector Line Board
Board Size : 200 x 240mm
350mm articulated arm with 70mm suction cup

LED Light Dent Repair Line Board
Reflection of LED lines reveal even the smallest dents.
Adjustable arm lever and strong suction cup base.
Size : 270 x 150mm
Flexible Arm : 370mm length
Power Supply : DC 5V
3m USB Cable included.
Easy-to-use lamp.
USB output : DC 5V /1 Amp

LED Light Line Board
Quickly and accurately find where a dent is located.
Three light sources can be independently turned on and off,
offering moderate brightness options.
Adjustable arm lever and strong suction cup base.
Board Size :360 x 180mm
Flexible Arm : 320mm length
Power supply : DC 5V
5m USB Cable included.
USB Output : DC 5V /1 Amp

800mm Dent Mirror
Ideal for better identification of dents and bumps,
e.g. hail damage, stone-chipping or small parking damages.
Asymmetric lines for precise detection of minor deformations.
Suitable for mobile use, folds in seconds
With plastic handle and storage pouch.

26pc Screw Extractor Set
With extractor tools for different applications.
Twist Sockets : 10 | 11 | 12 | 13 | 14 | 16 | 17 | 19mm
1/4 | 5/16 | 1/2 | 3/8 | 11/16in. with Spiral Profile
Twist Drills : 3/32 | 1/8 | 5/32 | 1/4 | 9/32in. Diameter
Left-hand Extractors : 1 | 2 | 3 | 4 | 5
Nut Splitters : 12 - 16mm | 16 - 22 mm
Drill Adaptor :1/4in.Dr to 3/8in.Dr
For removing damaged / defective bolts, nuts and Screws.

5pc Bolt Extractor Set
Sizes : 19 | 21 | 22 | 24 | 25mm
3/4 | 13/16 | 7/8 | 15/16 | 1in.
1/2in.Drive
Designed for use with manual or impact wrenches.
For extracting damaged or rusted bolts, nuts and screws.

7pc Lug Nut Flip Socket Set - 1/2in.Dr
Dual Sockets : 17mm | 19mm | 21mm | 13/16 | 7/8in.
Rod and Extension Bar : 75mm
Designed for use with manual or impact wrenches
For Standard Hex Wheel Nuts
or damaged bolts, nuts and Studs.
Chrome-Molybdenum

6pc Double Sided Lug Nut Extractor Set
1/2in.Dr Double Sided Impact Socket Set
Sizes : 17 | 19 | 21 | 22 | 24 | 25 | 26 | 27mm
11/16 | 3/4 | 13/16 | 7/8 | 15/16 | 1 | 1-1/32 | 1-1/16in.
Rod and Extension Bar : 75mm
Chrome-Molybdenum
Designed for use with manual or impact wrenches
Easily remove damaged bolts, nuts and screws
without damaging fastener edges.

14pc Bolt Extractor Set
1/2'' Drive Sockets :
6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 19mm
with Rod
Designed for use with manual or impact wrenches
For loosening damaged Bolts, Nuts, Screws and Studs.
Chrome-Molybdenum

10pc Bolt Extractor Set
Sockets : 14 | 16 | 17 | 19 | 21 | 22 | 24 | 27mm
1/2'' Drive Adaptor and Rod
Designed for use with manual or impact wrenches
For loosening damaged Bolts, Nuts, Screws and Studs.
Chrome-Molybdenum

3pc Double Sided Twist Socket - 1/2in.Dr
Sizes : 17 | 19 | 21mm. 6 Point and 12 Point
Dual profile sockets have fine and coarse spiral grooves.
Self-fastening and rejuvenating design.
For loosening badly damaged screws and nuts
DIN 3120 / ISO 1174 with ball reception

Suction Cup - 50Kg
with Aluminium Die Cast Body
Pad Diameter : 123mm
Maximum vertical suction: 50kg
Ideal for carrying large, heavy and awkward to handle materials.
Easy to operate suction vacuum controlled by the locking handle.
Designed for easy handling of non-porous tiles,
marble, glass, plastic & sheet metals.

Suction Cup Lifter with 2 Cups
Aluminium Die Cast Body.
Cup Diameter : 118mm
Lifting Capacity : 120kg
Quick release design for easy use.
Ideal for all kinds of smooth materials,
such as ceramic tiles, glass, wood floors, etc.
Designed for effortless transportation of a various items,
including tiles, glass panels, and mirrors.

Angle Adjustable Suction Cup Lifter
Aluminium Die Cast Body
Pad Diameter : 118mm
Maximum Vertical Lifting : 100kg
Adjustable Angle : 90 - 270 degrees
Can be used at multiple angles
allowing for seaming and levelling of flat surfaces.
Quick release design for easy use.
Ideal for all kinds of smooth materials,
such as ceramic tiles, glass, wood floors, etc.

Vacuum Suction Cup with Digital Display
The clear and easy-to-read LCD display shows the
suction power and battery status in real time.
With auto air pump.
Vertical suction up to 220kg
Rubber Diameter : 220mm
Voltage : 3.7V DC
Power : 3W

Foam Seal for CT6915
Size : 205 x 135 x 8mm
Replacement Foam Seal for
Vacuum Suction Cup with Digital Display.
For use on coarse surface.

High Performance Propane Blow Torch Kit
With 4 interchangeable tips :
Pin-point Flame, Standard Cyclone Flame,
Soft Flame for shrinking, Jumbo Cyclone Flame.
Piezo ignition allows torch to be lit at any angle.
Flame Temperature : 1600 - 1800 degrees C.
Ergonomic handle with 45 degree angled head,
locked burner system & safety lock button for continuous use.
Suitable for 400g Propane Cylinders.
For brazing ,annealing, soldering, low temperature welding & heat shrinking.

Rechargeable LED Work Light and Torch
Bulb : SMD + COB
Battery : 3.7V | 1200mAh
Charging Time : 2.5hrs
Switch Functions : COB Low / High | SMD | Off
Light Output : 50LM | 200LM | 50LM
Charging Port : Type-C
Adaptor : DC 5V / 1A
Charging Indicator : 4 Power indicators
Ideal for automotive inspection and various other tasks

Super Slim Inspection Light with Flexible Neck
Battery : 3.7V / 2500mAh Lithium
5W High power COB LED | 2W High power LED torch
Luminance : Max. 600LM Front Main | Max. 170LM Top Torch
Runtime : 3 - 30H Light | 8 - 50H Torch
Charging Port : Type-C
Adaptor : DC 5V / 1A
Dimming switch : 10 - 100 percent
Charging period : approx. 3.5h
Slim profile ideal for narrow and difficult access areas.

Super Bright Slim Folding Inspection Light SMD
Battery : 3.7V | 2500mAh Lithium
LED : 10W High power COB LED | 2WHigh power LED torch
Luminance : Max. 1000LM Front Main | Max. 150LM Top Torch
Ambient Temperature : minus 10 - plus 45 degrees C
Runtime : 3- 12H Light | 9H Torch
Charging Port : Type-C
Adaptor : DC 5V / 1A
Charging period : approx. 3.5h
Slim profile ideal for narrow and difficult access areas.

35mm Magnetic Core Drilling Machine
Suitable for Annular Cutters
Rated Voltage : 230V
Rated Frequency : 50 / 60Hz
Rated Power : 1500W
Max. Attraction : 14000N
Core Drilling Diameter : 35mm
Cutting Depth : 30mm
Stroke : 160mm

80mm Magnetic Core Drilling Machine
Suitable for Twist Drills and Annular Cutters
Rated Voltage : 220 - 240V
Rated Frequency : 50 / 60Hz
Rated Power : 1950W
Max. Attraction : 16700N
Core Drilling Diameter : 80mm
Twist Drill : 28mm
Cutting Depth : 50mm
Stroke : 185mm

SDS Drill Bit Holder
with Heavy Duty Locking Carabiner

Keep your drill bits within easy reach.
Suitable for 10mm shank SDS Plus drill bits.
Allows easy one-handed access and quick replacement,
perfect for aerial work, ensuring seamless transfer of Drills,
Screwdrivers and Bits. Easily clips to your belt or tool bag.

4.5in. / 115mm Angle Grinder : 230V
Input Power : 850W
Frequency : 50Hz
No-load Speed : 11000rpm
Disc Diameter : 4.5in. / 115mm
Supplied in card box.

12pc Sanding Belt Set
Flexible-Durable Aluminium Oxide Sanding Belts
For all 13 x 457mm Belt Sanders
Grit : 80 | 120 | 180 | 240
Suitable for CT7052

Square Tooth Long Trowel - 120 x 480mm
Stainless Steel Blade with Aluminium Handle.
For easy and smooth surfaces on both walls and floors.
Plate Size : 120 x 480mm with 10 x 10mm notches.
Great for applying and spreading mortar, screed,
adhesive onto various types of surfaces.

Square Tooth Long Trowel - 120 x 600mm
Stainless Steel Blade with Aluminium Handle.
For easy and smooth surfaces on both walls and floors.
Plate Size : 120 x 600mm with 10 x 10mm notches.
Great for applying and spreading mortar, screed,
adhesive onto various types of surfaces.

Stainless Steel Trowel
Plate size : 115 x 800mm
Designed to handle large tiles with ease.
With its 10 x 10mm notches, it can plaster large areas seamlessly
and can install large tiles with precision.
The baffles on both sides of the trowel can prevent mortar, tile glue
or putty from overflowing and quickly spread evenly.