7pc Double Ended Flexible Flare Nut Wrench Set
Sizes : 8 x 10mm | 9 x 11mm | 10 x 12mm
13 x 14mm | 15 x 17mm | 16 x 18mm | 19 x 21mm.
Chrome-Molybdenum

6pc E-Star Spanner Set
Dual Sizes - E6 | E7 | E8 | E10 | E11 | E12
E14 | E16 | E18 | E20 | E22 | E24
with Offset Heads
Chrome-Vanadium

3pc Mini Pliers Set - 125mm / 5in.
Combination Pliers - with jaws for both flat and round materials
Side Cutters - cuts both soft and hard wires.
Water Pump Pliers with push-button operation
Chrome-Vanadium

Auto Car Clip Pliers
For the quick and safe removal of plastic clips,
fasteners, and trim panels without damaging your vehicle.
Improved spring-loaded lever, easier operation.
Four-point support for controlled, damage-free lifting.
Non-slip grip

Insulated Plastic Clamp
Length : 160mm
For clamping uncovered cables
VDE insulation up to 1000V
Material : PP / TPE

Insulated Plastic Flat Nose Pliers
Length : 180mm
For clamping uncovered cable
VDE insulation up to 1000V
Material : PP / TPE

Insulated Plastic Long Nose Pliers
Length : 225mm
For clamping uncovered cable
VDE insulation up to 1000V
Material : PP / TPE

7pc Magnetic Swivel Spark Plug Socket Set - 3/8in.Dr
Size : 14mm | 16mm | 18mm | 21mm | 9/16in. | 13/16in. | 3/4in.
For damage free removal and installation of spark and glow plugs.
Magnetic design to hold plugs firmly in place.
Chrome-Vanadium

5pc Injector Pull Bar Set
This set enables the efficient removal of injectors,
ensuring a smooth and reliable pulling process.
Fits most common injectors.
Male Sizes : M12 x 1.5 | M12 x 1.0 | M14 x 1.5
Female Sizes : M12 x 1.5 | M14 x 1.5
Colour Zinc Finish

6pc Injector Puller Set
for Mercedes CDI engines
For removing common rail injectors
without having to disassemble cylinder head.
Applicable to Mercedes-Benz
CDI engines 611 | 612 | 613 etc.
Injection puller with impact hammer.

High Pressure Diesel Pump Sprocket Tool
for Hyundai and Kia vehicles
For removing the sprocket on the high pressure pump
Needed when replacing the high pressure pump.
OEM Code : 09331-4A0000

22mm Open Mouth Spanner for Oxygen Probes
Oxygen Sensor Wrench
With cranked Handle - short type
Suitable for use with Spanner Extenders
Chrome-Molybdenum

14mm Crowfoot ETG Sensor Wrench - 1/2in. Drive
For difficult to access Exhaust Gas Temperature Sensors
as found on VW Group vehicles ( VAG ).
Chrome-Molybdenum

17mm Crowfoot ETG Sensor Wrench - 1/2in. Drive
For difficult to access Exhaust Gas Temperature Sensors
as found on VW Group vehicles ( VAG ).
Chrome-Molybdenum

19mm Crowfoot ETG Sensor Wrench - 1/2in. Drive
For difficult to access Exhaust Gas Temperature Sensors
as found on VW Group vehicles ( VAG ).
Chrome-Molybdenum

24mm Crowfoot Sensor Wrench - 1/2in. Drive
For difficult to access Temperature Sensors
Chrome-Molybdenum

Valve Spring Compressor
For compressing the spring and removing the keepers
No need to remove the cylinder head
Adjustable cam action
No need to readjust the tool after each spring
Compatible with compressed air supplied through the
spark plug hole to retain valves during valve spring service.

12pc TDC Locator / Finder Set
For the accurate setting of the TDC point during timing belt
replacement or cylinder head disassembly or seal replacement.
Contents :
Hose
Hooks with Magnet
Measuring Pipe
3 x Lengthener with Connection Pipe
6 x Adaptors : 8 | 10 | 12 | 14 | 18mm diameter and Cone Adaptor
Features an aluminium extension for use in deep ignition chambers.

Crankshaft Pulley Holding Tool for Opel
For use with a 1/2in.Dr Power Bar.
Adjustable range : 81mm - 115mm Max
For counter holding the crank shaft belt drive when releasing or
tightening the crank shaft central screws on Vauxhall/Opel
and some Chevrolet models.
Prevents slipping whilst holding.
OEM Code : EN-49979.

7pc Crank / Camshaft Radial Seal Ring Extractor Set
for VAG Petrol Engines : Lupo and Polo 1.4 | VR6 | Audi V6
Short Extractors : 25 | 32 | 35 | 27| 55mm Diameter
Long Extractor : 32mm Diameter
Pilot Pin Socket :19mm Hex x 60mm-L x P1.25
For removing rotary shaft seals and radial sealing rings.
Grips the seal from the inside with its conical profile
Suitable for most commercially available sealing rings.

Vauxhall / Opel Timing Tool Set
For vehicles with 1.6 | 1.8 16V Engines.
With Camshaft & Sprocket Locking Tools
Flywheel Holding Tool
Locking Pins.
Applicable to : Astra-G | H | Corsa-D | Insignia | Mervia
Signum | Vectra-C | Zafira-B / 2003 - 2011
Also fits Chevrolet Cruze | Orlando 1.4.
Fiat Croma | Alfa Romeo 159 / 2003 - 2012.

Tie Rod Coupler
Provides a temporary secure solution to a broken tie rod.
Eye bolts secure the tie rod coupler to the broken tie rod
tightening by hand or with a small leverage bar.
Allows mechanic to easily steer vehicle into repair bay.
Don't use at speed over 5 mph or distances over 100 yards.
Useful for tow drivers, allowing wheel alignment to be briefly
fixed allowing easier loading and unloading of the vehicle.

Control Arm Supporting Tool
For transmission jacks featuring a maximum piston diameter of 30mm
and offering a universal fit for wheel hubs with bolt circle diameters of
5 x 130mm | 5 x 120mm | 5 x 112mm | 5 x 100mm
and other configurations.
It provides secure support via the wheel studs or wheel nuts,
ensuring controlled and stable lowering and raising of control arms
or axles to the required positions.

Inner Axle Side Seal Installation Tool
for DANA 30 / 40 / 60 Front Differentials
found on Chevrolet, Dodge, Ford, GMC,
International Scout, Jaguar, Isuzu Rodeo,
Jeep, Mercury Mariner, Volvo and more.
Helps install inner front axle seal to the proper depth.
Provides safe and even pressure to the inner axle seal
to press it into the axle housing without damaging the seal.
The puck features different inner and outer dimensions,
making it suitable for pressing a wide range of seals.

42mm Ball Joint Remover for Commercial Vehicles
Drive profile size : 3/4in. Dr
Jaw Opening : 42 mm
Ideal for Trucks / heavy goods vehicles.
Applicable to Mercedes-Benz Actros and MAN 414
Chrome-Molybdenum

58mm Ball Joint Remover for Commercial Vehicles
Drive profile size : 3/4in.Dr
Jaw Opening : 58 mm
Ideal for Trucks / heavy goods vehicles.
Applicable to DAF / Scania and
other European commercial vehicles
Chrome-Molybdenum

67mm Ball Joint Remover for Commercial Vehicles
Drive profile size : 3/4in. Dr
Jaw Opening : 67mm
Ideal for Trucks / heavy goods vehicles.
Applicable to Man Tractor Trailer FE410A / FE414
Chrome-Molybdenum

11pc Ball Joint Separator / Pneumatic Impact Set
Ball Joint Thread Sizes :
M10 x 1.25mm | M10 x 1.5mm | M12 x 1.25mm | M12 x 1.5mm
M12 x 1.75mm | M14 x 1.5mm | M14 x 2.0mm | M16 x 1.5mm.
Air Hammer Punches.
17mm Hex Punch to align the impact gun where required.

6pc VAG Sub-Frame Locating Pin Set
Used to keep alignment of the sub-frame during reassembly.
Size : M12 x 1.5mm x H5 | M10 x 1.5mm x H5.
OEM Codes : T10486A | T10227.
Compatible with VW / Audi vehicles.

Strut Retaining Top Nut Wrench
for Front Wheel Drive Mercedes Sprinter
including e-Sprinter / 2018 on.
Allows access to the top strut fixing for removal of the strut.
Size : 106mm / 15 flats.
Use with 1/2in.Dr socket

Universal Manual Coil Spring Compressor
Specifically designed for MacPherson struts on both
front and rear axles across a wide range of vehicles.
Torque Multiplier
Transmission ratio : 1:5
Screw body length : 450mm
Maximum clamping force : 2300kg
Jaw range : 100 - 265mm
Drive : 24 mm Hex
Suitable for a wide range of makes and models.

11pc Brake Bleeding Thru? Socket Set - VAG vehicles
For bleeding the brakes without dismantling the wheels.
With Tool Handle - 9 x 12mm push fit connector.
17mm Ratchet Ring Spanner Swivel Head
Through Sockets : 7 | 10 | 11mm / Lengths : 29mm - 85mm
Silicone bleeder hose with return valve : 1200mm
which prevents used brake fluid from running back
as well as air that has been pumped out

Brake Disc Puller
Suitable for 170mm - 400mm Diameter Discs
For the fast and safe removal of brake discs
when corrosion and dirt are sticking the discs in place.
Brake disc puller with wide spread adjustable spring loaded legs.

E20 Brake Caliper Socket for MAN / TGL
For the dismantling and assembly of brake line fittings.
30mm Hex drive with spring ball.
Chrome-Vanadium

E24 Brake Caliper Socket for MAN / TGL
For the dismantling and assembly of brake line fittings.
30mm Hex drive with spring ball.
Chrome-Vanadium

13mm SAF Brake Disc Socket - 12 point
Designed for the dismantling and assembly of brake discs.
External hexagon drive : 19mm
For machinery usage
Chrome-Molybdenum

15mm SAF Brake Disc Socket - 12 point
Designed for the dismantling and assembly of brake discs.
External hexagon drive : 19mm
For machinery usage
Chrome-Molybdenum

44pc Master BMW Locking Wheel Nut Key Set
Keys : 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49
50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | 60
Unique Bits : 11/15PT | 12/14PT | 13/16PT | 14/12PT
15/11PT | 16/10PT | 17/7PT | 18/13PT | 19/8PT | 20/9PT
30/13PT | 31/15PT | 32/16PT | 33/17PT | 34/18PT
35/19PT | 36/20PT | 37/21PT | 38/22PT | 40/23PT.
With Socket / Adaptor / Puller and Punch.
Chrome-Molybdenum

66pc Master VAG Locking Wheel Nut Key Set
Keys : A | B | C | E | F | G | H | I | J | L
M | N | O | Q | R | S | T | V | W | X
Keys : 521 | 522 | 523 | 524 | 525 | 526 | 527 | 528 | 529
530 | 531 | 532 | 533 | 534 | 535 | 536 | 537 | 538 | 539 | 540
Unique Bits : 51/6PT | 52/7PT | 53/8PT | 54/9PT | 55/10PT
56/11PT | 57/12PT | 58/13PT | 59/14PT | 60/15PT | 61/16PT | 62/17PT
ABC0/10PT | ABC1/11PT | ABC2/13PT | ABC3/14PT | ABC4/15PT
ABC5/16PT | ABC6/17PT | ABC7/19PT | ABC8/20PT | ABC9/21PT.
With Socket / Adaptor / Puller and Punch.

21pc Locking Wheel Nut Key Set for Volvo A
With Impact Socket : 17mm 1/2in.Dr
Covers a wide range of Volvo wheel nuts
for use where the original key is missing or lost.
Applicable to : S60 | XC60 | V70 | XC70 | S80 and XC90.
Sizes : 7601 | 7602 | 7603 | 7604 | 7605 | 7606 | 7607 | 7608
7609 | 7610 | 7611 | 7612 | 7613 | 7614 | 7615 | 7616 | 7617
7618 | 7619 and 7620.
Chrome-Molybdenum

21pc Locking Wheel Nut Key Set for Volvo B
Covers a wide range of Volvo wheel nuts
for use where the original key is missing or lost.
Applicable to : S60 | XC60 | V70 | XC70 | S80 | XC90.
Key Numbers : 065P | 071P | 072P | 076P | 079P
121P | 651P | 944L | 944P | 945L | 945P | 946L
947L | 948L | 949L | 950L | 951L | 951P | 952L | 953L
Impact Socket : 17mm / 1/2in.Dr
Chrome-Molybdenum

10pc Wheel Nut Impact Socket Set - 1/2in.Dr
with Thin Walls and Protective Sleeves for Alloy Wheels
Sizes : 15 | 17 | 19 | 21 | 23 | 24mm
with 17mm and 21mm Convex Flower
Colour Coded / Chrome Molybdenum

15pc Locking Wheel Nut Removal Kit
Sockets / outer diameter : 26 | 27 | 28 | 28.8 | 28.9
30.0 | 30.9 | 31.8 | 34.8 | 35.8 | 36.8mm.
Nut Connectors : H16 x H19 | H19 x H22
Replacement Drift Punches.
Use where the original key is missing or the wheel nut is damaged.
Provides a quick and efficient solution to remove locking wheel nuts.
Chrome-Molybdenum

Wheel Stud Extraction / Fitting Tool Set
for Cars and Vans - BMW, Chrysler, Ford, Hyundai, Kia, Mazda
Mercedes-Benz, Mitsubishi, PSA and VW Group models.
Threaded Sockets : M12 x 1.25 | M12 x 1.5 | M14 x 1.5.
Extraction Air Punch
Fitting Bearing.
Use Air Chisel for Extraction
Use 21mm Socket for Insertion.
Chrome Molybdenum

9pc Wheel Stud Sleeve Pin Set for Trucks
Sleeves : M18 x 1.5 | M20 x 1.5 | M22 x 1.5
Protects the wheel threads when taking off the wheel.
Centre sleeve kit with inner thread for exactly mounting
the truck wheels with No damage to the thread.

4pc Wheel Budd Internal Thread Restoring Kit
For Use on Vehicles that use Budd Wheel Nuts
M12 x 1.25 for PSA
M12 x 1.5 for BMW
M12 x 1.5 for Mercedes
M12 x 1.75 for Volvo
M14 x 1.5 for VAG Vehicles

4pc Dual Wheel Separator Kit
Ideally suited to release fixed twin wheels on HGV and LCV vehicles
Also ideal as on-board tool for breakdown service.
Saves time when removing corroded wheels.
Contents :
Spindle with Inner Bearing - 230mm
Pressure Piece - 44mm diameter
Removable Nut - 50mm diameter
Removable Nut - 48mm diameter

7pc Tyre Valve Seat Cleaning Tool Set for Alloy Wheels
Ideal for cleaning the rim valve seal seat,
removes paint damage caused by oxidation
and prevents leaks at the valve seat
Suitable for rubber, screwed steel and TPMS valves
Grinding Pin Holders : 65mm | 197mm
Grinding Pins : 17mm and 20mm diameter
1/4in. Bit Extension : 150mm
Valve Seat Scraper with guide pin
Magnetic Mat.

50 Ton Air Hydraulic Bottle Jack
Ram Travel : 165mm
Minimum Height : 285mm
Maximum Height : 450mm
Weight : 34kg
Air Inlet : 1/4in. BSP
Air safety valve to prevent overloading.
2 wheels for mobility and positioning

Auto Hydraulic Car Rotisserie - 4500LB
For 360 degree vehicle rotation with 12 pre-set positions.
Equipped with dual 8 Tonne hydraulic cylinders
to raise and lower the lifting cradles effortlessly,
plus a smart design that allows for one person operation.
Heavy duty balancing system with curved arch-shaped swing foot.
Fits body size from 1200mm to 6000mm
Adjustable Length : 3251 - 6650mm
Adjustable Height : 530-1245mm
Load capacity : 4500 LB