Insulated Plastic Clamp
Length : 160mm
For clamping uncovered cables
VDE insulation up to 1000V
Material : PP / TPE

Insulated Plastic Flat Nose Pliers
Length : 180mm
For clamping uncovered cable
VDE insulation up to 1000V
Material : PP / TPE

Insulated Plastic Long Nose Pliers
Length : 225mm
For clamping uncovered cable
VDE insulation up to 1000V
Material : PP / TPE

6pc Injector Puller Set
for Mercedes CDI engines
For removing common rail injectors
without having to disassemble cylinder head.
Applicable to Mercedes-Benz
CDI engines 611 | 612 | 613 etc.
Injection puller with impact hammer.

High Pressure Diesel Pump Sprocket Tool
for Hyundai and Kia vehicles
For removing the sprocket on the high pressure pump
Needed when replacing the high pressure pump.
OEM Code : 09331-4A0000

22mm Open Mouth Spanner for Oxygen Probes
Oxygen Sensor Wrench
With cranked Handle - short type
Suitable for use with Spanner Extenders
Chrome-Molybdenum

14mm Crowfoot ETG Sensor Wrench - 1/2in. Drive
For difficult to access Exhaust Gas Temperature Sensors
as found on VW Group vehicles ( VAG ).
Chrome-Molybdenum

17mm Crowfoot ETG Sensor Wrench - 1/2in. Drive
For difficult to access Exhaust Gas Temperature Sensors
as found on VW Group vehicles ( VAG ).
Chrome-Molybdenum

19mm Crowfoot ETG Sensor Wrench - 1/2in. Drive
For difficult to access Exhaust Gas Temperature Sensors
as found on VW Group vehicles ( VAG ).
Chrome-Molybdenum

24mm Crowfoot Sensor Wrench - 1/2in. Drive
For difficult to access Temperature Sensors
Chrome-Molybdenum

7pc Crank / Camshaft Radial Seal Ring Extractor Set
for VAG Petrol Engines : Lupo and Polo 1.4 | VR6 | Audi V6
Short Extractors : 25 | 32 | 35 | 27| 55mm Diameter
Long Extractor : 32mm Diameter
Pilot Pin Socket :19mm Hex x 60mm-L x P1.25
For removing rotary shaft seals and radial sealing rings.
Grips the seal from the inside with its conical profile
Suitable for most commercially available sealing rings.

Crankshaft Pulley Holding Tool for Opel
For use with a 1/2in.Dr Power Bar.
Adjustable range : 81mm - 115mm Max
For counter holding the crank shaft belt drive when releasing or
tightening the crank shaft central screws on Vauxhall/Opel
and some Chevrolet models.
Prevents slipping whilst holding.
OEM Code : EN-49979.

12pc TDC Locator / Finder Set
For the accurate setting of the TDC point during timing belt
replacement or cylinder head disassembly or seal replacement.
Contents :
Hose
Hooks with Magnet
Measuring Pipe
3 x Lengthener with Connection Pipe
6 x Adaptors : 8 | 10 | 12 | 14 | 18mm diameter and Cone Adaptor
Features an aluminium extension for use in deep ignition chambers.

Vauxhall / Opel Timing Tool Set
For vehicles with 1.6 | 1.8 16V Engines.
With Camshaft & Sprocket Locking Tools
Flywheel Holding Tool
Locking Pins.
Applicable to : Astra-G | H | Corsa-D | Insignia | Mervia
Signum | Vectra-C | Zafira-B / 2003 - 2011
Also fits Chevrolet Cruze | Orlando 1.4.
Fiat Croma | Alfa Romeo 159 / 2003 - 2012.

15L Super Duty Plastic Drain Container
Stores upright or flat without leaking.
Integrated handle and grip for easy carrying and handling.
Extended design captures the full stream of fluid.
High capacity for multiple changes and large equipment.
Leak proof design for secure disposal.

24L Super Duty Plastic Drain Container
Stores upright or flat without leaking.
Integrated handle and grip for easy carrying and handling.
Extended design captures the full stream of fluid.
High capacity for multiple changes and large equipment.
Leak proof design for secure disposal.

Tie Rod Coupler
Provides a temporary secure solution to a broken tie rod.
Eye bolts secure the tie rod coupler to the broken tie rod
tightening by hand or with a small leverage bar.
Allows mechanic to easily steer vehicle into repair bay.
Don't use at speed over 5 mph or distances over 100 yards.
Useful for tow drivers, allowing wheel alignment to be briefly
fixed allowing easier loading and unloading of the vehicle.

Control Arm Supporting Tool
For transmission jacks featuring a maximum piston diameter of 30mm
and offering a universal fit for wheel hubs with bolt circle diameters of
5 x 130mm | 5 x 120mm | 5 x 112mm | 5 x 100mm
and other configurations.
It provides secure support via the wheel studs or wheel nuts,
ensuring controlled and stable lowering and raising of control arms
or axles to the required positions.

Inner Axle Side Seal Installation Tool
for DANA 30 / 40 / 60 Front Differentials
found on Chevrolet, Dodge, Ford, GMC,
International Scout, Jaguar, Isuzu Rodeo,
Jeep, Mercury Mariner, Volvo and more.
Helps install inner front axle seal to the proper depth.
Provides safe and even pressure to the inner axle seal
to press it into the axle housing without damaging the seal.
The puck features different inner and outer dimensions,
making it suitable for pressing a wide range of seals.

3pc Ball Joint Removal Set
Low profile set suitable for most vehicles.
Features forged steel body and hardened screw with thrust ball.
23mm | 28mm | 34mm for various vehicles.

58mm Ball Joint Remover for Commercial Vehicles
Drive profile size : 3/4in.Dr
Jaw Opening : 58 mm
Ideal for Trucks / heavy goods vehicles.
Applicable to DAF / Scania and
other European commercial vehicles
Chrome-Molybdenum

25pc Ball Joint Service Master Adaptor Set
For use on all cars and light trucks that have press-fit type ball joints
C-Frame | Forcing Screw | Installation Adaptor | Removal Adaptor
Installation and Removal Cups
Receiving Tubes

11pc Ball Joint Separator / Pneumatic Impact Set
Ball Joint Thread Sizes :
M10 x 1.25mm | M10 x 1.5mm | M12 x 1.25mm | M12 x 1.5mm
M12 x 1.75mm | M14 x 1.5mm | M14 x 2.0mm | M16 x 1.5mm.
Air Hammer Punches.
17mm Hex Punch to align the impact gun where required.

6pc VAG Sub-Frame Locating Pin Set
Used to keep alignment of the sub-frame during reassembly.
Size : M12 x 1.5mm x H5 | M10 x 1.5mm x H5.
OEM Codes : T10486A | T10227.
Compatible with VW / Audi vehicles.

Strut Retaining Top Nut Wrench
for Front Wheel Drive Mercedes Sprinter
including e-Sprinter / 2018 on.
Allows access to the top strut fixing for removal of the strut.
Size : 106mm / 15 flats.
Use with 1/2in.Dr socket

11pc Brake Bleeding Thru? Socket Set - VAG vehicles
For bleeding the brakes without dismantling the wheels.
With Tool Handle - 9 x 12mm push fit connector.
17mm Ratchet Ring Spanner Swivel Head
Through Sockets : 7 | 10 | 11mm / Lengths : 29mm - 85mm
Silicone bleeder hose with return valve : 1200mm
which prevents used brake fluid from running back
as well as air that has been pumped out

3pc Universal Brake Disc Run Out Kit
Allows the DTi gauge to be mounted in almost any position
against the brake disc to measure disc warp.
DTi Gauge accurate to 0.01mm / total deflection 10mm.
The Locking pliers allow fixing to suspension bracket or component part
Segmented Steel Mounting Post can be bent and locked into position.
Measures brake disc drive flange or any rotating component run-out.
Can be used on motorcycles.

E20 Brake Caliper Socket for MAN / TGL
For the dismantling and assembly of brake line fittings.
30mm Hex drive with spring ball.
Chrome-Vanadium

E24 Brake Caliper Socket for MAN / TGL
For the dismantling and assembly of brake line fittings.
30mm Hex drive with spring ball.
Chrome-Vanadium

13mm SAF Brake Disc Socket - 12 point
Designed for the dismantling and assembly of brake discs.
External hexagon drive : 19mm
For machinery usage
Chrome-Molybdenum

15mm SAF Brake Disc Socket - 12 point
Designed for the dismantling and assembly of brake discs.
External hexagon drive : 19mm
For machinery usage
Chrome-Molybdenum

44pc Master BMW Locking Wheel Nut Key Set
Keys : 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49
50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 | 60
Unique Bits : 11/15PT | 12/14PT | 13/16PT | 14/12PT
15/11PT | 16/10PT | 17/7PT | 18/13PT | 19/8PT | 20/9PT
30/13PT | 31/15PT | 32/16PT | 33/17PT | 34/18PT
35/19PT | 36/20PT | 37/21PT | 38/22PT | 40/23PT.
With Socket / Adaptor / Puller and Punch.
Chrome-Molybdenum

66pc Master VAG Locking Wheel Nut Key Set
Keys : A | B | C | E | F | G | H | I | J | L
M | N | O | Q | R | S | T | V | W | X
Keys : 521 | 522 | 523 | 524 | 525 | 526 | 527 | 528 | 529
530 | 531 | 532 | 533 | 534 | 535 | 536 | 537 | 538 | 539 | 540
Unique Bits : 51/6PT | 52/7PT | 53/8PT | 54/9PT | 55/10PT
56/11PT | 57/12PT | 58/13PT | 59/14PT | 60/15PT | 61/16PT | 62/17PT
ABC0/10PT | ABC1/11PT | ABC2/13PT | ABC3/14PT | ABC4/15PT
ABC5/16PT | ABC6/17PT | ABC7/19PT | ABC8/20PT | ABC9/21PT.
With Socket / Adaptor / Puller and Punch.

21pc Locking Wheel Nut Key Set for Volvo B
Covers a wide range of Volvo wheel nuts
for use where the original key is missing or lost.
Applicable to : S60 | XC60 | V70 | XC70 | S80 | XC90.
Key Numbers : 065P | 071P | 072P | 076P | 079P
121P | 651P | 944L | 944P | 945L | 945P | 946L
947L | 948L | 949L | 950L | 951L | 951P | 952L | 953L
Impact Socket : 17mm / 1/2in.Dr
Chrome-Molybdenum

10pc Wheel Nut Impact Socket Set - 1/2in.Dr
with Thin Walls and Protective Sleeves for Alloy Wheels
Sizes : 15 | 17 | 19 | 21 | 23 | 24mm
with 17mm and 21mm Convex Flower
Colour Coded / Chrome Molybdenum

15pc Locking Wheel Nut Removal Kit
Sockets / outer diameter : 26 | 27 | 28 | 28.8 | 28.9
30.0 | 30.9 | 31.8 | 34.8 | 35.8 | 36.8mm.
Nut Connectors : H16 x H19 | H19 x H22
Replacement Drift Punches.
Use where the original key is missing or the wheel nut is damaged.
Provides a quick and efficient solution to remove locking wheel nuts.
Chrome-Molybdenum

Wheel Stud Extraction / Fitting Tool Set
for Cars and Vans - BMW, Chrysler, Ford, Hyundai, Kia, Mazda
Mercedes-Benz, Mitsubishi, PSA and VW Group models.
Threaded Sockets : M12 x 1.25 | M12 x 1.5 | M14 x 1.5.
Extraction Air Punch
Fitting Bearing.
Use Air Chisel for Extraction
Use 21mm Socket for Insertion.
Chrome Molybdenum

4pc Wheel Budd Internal Thread Restoring Kit
For Use on Vehicles that use Budd Wheel Nuts
M12 x 1.25 for PSA
M12 x 1.5 for BMW
M12 x 1.5 for Mercedes
M12 x 1.75 for Volvo
M14 x 1.5 for VAG Vehicles

4pc Dual Wheel Separator Kit
Ideally suited to release fixed twin wheels on HGV and LCV vehicles
Also ideal as on-board tool for breakdown service.
Saves time when removing corroded wheels.
Contents :
Spindle with Inner Bearing - 230mm
Pressure Piece - 44mm diameter
Removable Nut - 50mm diameter
Removable Nut - 48mm diameter

Spray Gun and Paint Tank Kit
High pressure spray gun
with 2 litre Tank and Regulator.
Max Working Pressure : 4 bar
Nozzle : 1.8mm
80in. x 1/2in. Air Hose with 1/4in. fitting
80in. x 1/2in Paint hose with 3/8in. fitting

Auto Hydraulic Car Rotisserie - 4500LB
For 360 degree vehicle rotation with 12 pre-set positions.
Equipped with dual 8 Tonne hydraulic cylinders
to raise and lower the lifting cradles effortlessly,
plus a smart design that allows for one person operation.
Heavy duty balancing system with curved arch-shaped swing foot.
Fits body size from 1200mm to 6000mm
Adjustable Length : 3251 - 6650mm
Adjustable Height : 530-1245mm
Load capacity : 4500 LB

Winch Installation Stand
Heavy duty installation stand engineered for
secure mounting of 5000lb - 6000lb winches.
Robust steel construction provides stable support
during winch installation and removal.
Designed for workshop and field use,
this stand accommodates standard winch footprints
and simplifies maintenance access.
Essential equipment for professional installers and
automotive workshops handling medium-capacity winch systems.

Winch Installation Stand
Heavy duty installation stand engineered for
secure mounting of 8000lb - 9000lb winches.
Robust steel construction provides stable support
during winch installation and removal.
Designed for workshop and field use,
this stand accommodates standard winch footprints
and simplifies maintenance access.
Essential equipment for professional installers and
automotive workshops handling medium-capacity winch systems.

Flexible Magnetic Mat
Size : 320 x 250 x 7mm holds up to 17kg.
Made from wear-resistant leather effect PVC.
Protects both tools and surfaces from scratches, marks, and damage.
Keeps tools, fixings, and components securely in place,
flexible design allows it to bend, fold, or wrap around curved surfaces,
while also laying flat for easy storage.
Ideal for use on vehicles, toolboxes, or any ferrous surface,
offers convenient and organised storage for small tools and parts.

Socket Storage Tray : 1/4in. | 3/8in. | 1/2in. Drive
Size : 520 x 118mm
Holds up to 40 sockets :
14 x 1/4in.clips | 14 x 3/8in.clips | 12 x 1/2in.clips
Each ABS clip rotates 360 degrees
and includes a ball bearing for secure retention.
Individual rails can be removed or switched for customization.

Garage Workbench Storage System
With Black and Grey powder coated finish.
1.0mm industrial cold rolled steel construction.
2 tall side cabinets and overhead cabinet
Pegboard back panel with tube lights
Heavy duty 7 drawer tool chest with wooden top.
Drawer mats and central locking system.
Overall size : L 2685mm / H 1970mm / W 500mm
Adjustable feet for levelling.

20pc Parking Sensor Hole Cutter Set
For cutting precise PDC sensor holes in bumpers up to 5mm thick
Provides clean damage free holes in painted bumpers.
Suitable for use on a wide range of vehicles.
13mm Hex Nut Driver Drill Bit | 6-point Socket | 1/4in. Hex Shank
Cutter Sizes : 17 | 18 | 18.2 | 19 | 20 | 22.5 | 24
26 | 26.7 | 27 | 28.1 | 29.3 | 32 | 34 | 38 | 38.9mm.
Punching Tool Spindle with Nut.
HSS Drill Bit / 8mm diameter.
Die.

13pc Bolt Extractor Set - 3/8in.Dr
Sizes 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19mm
Adaptor : 1/2in.F x 3/8in.M
For loosening and removing seized nuts and bolts
with damaged or up to 85 percent rounded heads.
Also suitable for use on intact fasteners.
Intended for manual operation
Chrome-Vanadium
Plus Socket Rail.

5pc Large Tap Socket Set
For : 5/8in. / 16mm | 11/16in. / 18mm / 3/4in.
7/8in. / 22mm | 1in. / 25mm Taps,
With magnet for holding the tap
This set allows users to tap threads in tight or hard-to-reach areas.
Used with a standard ratchet, T-handle, or extension,
making the set highly compatible with a range of tools.
Chrome-Molybdenum

56pc Master Thread Repair File / Tap and Die Kit
23 UNF / UNC Taps: 1/4 | 5/16 | 3/8 | 7/16 | 1/2 | 9/16in.
Metric : M6 x 1.0 - M14 x 1.5
28 UNF / UNC Dies : 1/4 | 5/16 | 3/8 | 7/16 | 1/2 | 9/16 | 5/8in.
Metric Dies : M6 x 1.0 - M14 x 1.5.
Thread Files : SAE / Metric
Thread Pitch Gauges : SAE / Metric