Hex Key 19. 22 and 24mm
for Motorcycle Front Wheel Spindles

Motorcycle Spindle Tool - 3/8in.Dr
Size Range : 17 | 19 | 22 | 24mm
Use with any 3/8in.Dr tool or with a standard socket
This professional tool is ideal for constant workshop use

6 in 1 Motorcycle Spindle Tool
Prevents spindle from spinning when tightening or loosening wheel nut.
Use appropriate socket on free end of tool to hold spindle.
6 different internal hexagon sizes :
12mm for Front Axle for KTM
14m

9pc Motorcycle Spoke Wrench Set
Specially designed spoke wrench with eight interchangeable heads.
Suitable for adjusting spoke tension and correcting buckled wheels.
Head Sizes :
5.4mm | 5.6mm | 5.8mm | 6.0mm | 6.2mm | 6.4mm | 6.6mm | 6.8mm

11pc Motorcycle Spoke Wrench Set with Torque Wrench
Torque Wrench : 1 - 7Nm.
Interchangeable spoke wrench heads :
5.1 | 5.6 | 5.8 | 6.1 | 6.3 | 6.5 | 6.7 | 6.8 | 6.9mm & Spline type.
Designed to allow spokes to be replaced in accordance with the
wheel manufacturers specifications and set to the correct torque.
Incorrect spoke adjustment can lead to excessive radial or lateral run-out.
Applications include :
BMW | KTM | Ducati | Excel Rims and others

8pc Adjustable Hook & Pin Spanner Wrench Set
Jaw Range : 35 - 60 | 60 - 90 | 90 - 120mm
With interchangeable Hooks and Pin Lugs
Suitable for DIN 1804 and DIN 981 bearing nuts
For use on motorcycle suspension slotted retaining rings and
ideal for automotive / industrial / plumbing and hardware applications.
With 2 spare pins.

Automotive Battery Tester
Suitable for 6 | 12 | 24V DC circuits
For detecting faults in low tension circuits in automotive vehicles.
such as Cars | motorcycles | bulldozers | road rollers | excavators

Motorcycle Compression & Fuel Pressure Gauge Set
3 Gauges with Connectors and Adaptors for
testing motorcycle compression and fuel pressure.
Compression : 0 - 300psi | 0 - 2000kPa.
Fuel Pressure : 0 - 7bar | 0 - 1000psi.
Fuel Low

7pc Compression Test Kit
For checking the compression of single cylinders on Diesel and Petrol engines.
Suitable for most Vehicles and Motorcycles with Adaptors for :
M10 x 1.00 | M12 x 1.25 for motorbikes
M24 x 2 for Diesel Engines
M12 x 1.25 with 7 mm hole for VW Diesel engines
Multi-Valve Engines
M14 x 1.25 and M18 x 1.5
Maximum pressure : 6.8bar or 100psi.

Small Engine Valve Tappet Adjusting Tool Kit
Sizes : 8 | 9 | 10mm 12 point offset wrenches
with 3 and 4 mm Square and Slotted Adjusters.
For servicing most Motorcycles / ATVs and ATCs.
with 4 stroke engines with screw type adjusters.
Honda | Suzuki | Yamaha
Chrome-Vanadium

Small Engine Valve Spring Compressor
Range : 3/4in. to 1-1/16in.
With 2 Jaw Sizes.
Heavy-duty frame and screw for rigidity.
Simple and Robust for -
Briggs and Stratton / Clinton / Harley-Davidson etc.

Valve Spring Compressor Kit
5 Adaptors for various spring diameters
16 | 19 | 23 | 25 | 30mm or 5/8 to 13/16in.
Forcing Screws : 70 | 110 | 120mm
Also include Telescopic Pick-up Tool and Tweezers.
Ideal for Motorcycles and Small Bore Engines

Motorcycle TDC Dial Indicator Kit
Precision Gauge for locating TDC position
for Ignition Timing Adjustment on most Motorcycles.
Suitable for most bike cylinder heads
with 10mm and 14mm Spark Plug Adapters.

9 Litre Manual / Pneumatic Fluid Extractor
This Fluid Extractor may be used in conjunction with a compressor
or manually when an air line is not available.
Suitable for extracting oil from vehicles and industrial machinery.
Also suitable for low viscosity fluids such as water.
With 6 and 10mm diameter suction probes and brake bleeding hose.
Working pressure : 70 -170psi
Air inlet: 1/4in.
Air consumption: 5cfm

Oil Drain Pan - 2 litre for Motorcycles

Flywheel Puller - M26 x 1.5 RH Thread Male
Required to service the flywheel on a large number of Motorbikes
including: Honda / Yamaha / Kawasaki and Suzuki 2 / 4 Stroke Engines

10pc Motorcycle Flywheel Puller Set
used to separate flywheel from the crankshaft taper.
Suitable for most makes of motorcycle.
Left and Right hand thread

Suzuki Suspension Castle Nut Socket
4 Pin / 1/2in.Dr Socket
External 43mm / Internal 30.5mm
Pins : 5mm x 6.3mm
Applicable to : V650 / 1000 | DI650 / 1000 | V-Storm
Also Hayabusa / Bking and GSX-R750 / 1000 / 1100

3pc Brake Disc Run Out Kit
Allows the DTi gauge to be mounted in almost any position
against the brake disc to measure disc warp.
DTi Gauge accurate to 0.01mm / total deflection 10mm.
The Locking pliers allow fixing to suspension bracket or component part
Segmented Steel Mounting Post can be bent and locked into position.
Universal - measures brake disc drive flange or any rotating component run-out.
Can be used on motorcycles.

Ducati Motorcycle Alternator Cover Puller
Ducati Alternator Cover Puller
Essential when removing the left side engine casing on
Multistrada / Monster / Supersport and Super bike / 1990 - 2009
Made from Aluminium to remove cover without damage
where the bolt on alternator cover is tightened.

Ducati Clutch Hub and Drum Tool
For locking the clutch hub and drum together during engine servicing.
With bolt for location after removing the clutch cover.
Made from Reinforced nylon with fibreglass.
Motorcycle must be locked in gear with back wheel locked.
Applicable to a wide range of bikes from 2001 onwards.
OEM Code : 88713.2133.

Ducati Primary Drive Gear Holding Tool
3 Pin Tool for locking the primary drive gears during servicing,
avoids the potential for damage to the primary gear teeth.
Applicable to - Monster / Streetfighter and Superbike.
OEM Code : 88713.2102.

Rear Wheel Axle Nut Socket
Dual size : 41mm / 46mm for Ducati motocycles
46mm socket for the rear wheel nut and
41mm socket for the sprocket retainer nut.
Can be used with standard ratchets or impact guns.
Applicable to : Ducati 7

Wheel Nut Socket for Ducati Motorcycles
Dual Size : 55mm 12 Point & 30mm Hex.
This low profile socket is designed to remove both front and
rear wheel nuts that have been over tightened or are partially seized.
Applicable to Ducati Supe

60mm Wheel Nut Socket for KTM Rear
1/2in.Dr / 60mm Single Hex Shallow Socket
with central boss which keeps the socket engaged
and aligned when removing high torque fixings.
Can be used with standard ratchets or impact guns.
Appli

Flywheel Puller or KTM / Suzuki / Yamaha Motorcycles
M33 x 1.5mm
Suitable for the following models :
KTM : 625 SMC | 640 LC4 Adventure | 640 LC4E | 690 RFR
SUZUKI : GSXR 600 | GSXR 750 | GSXR 1000
YAMAHA : WR 450F | YFZ 450

Flywheel Puller for Suzuki Motorcycles
M50 x 1.5mm
Suitable for the following Suzuki models :
GV | LS | LTA | LTF | VL | VS | VX | VZR

Motorcycle Chain Alignment Tool
Attaches directly to the rear sprocket using screws.
The positioning rod automatically aligns with the chain
to ensure precise alignment and help prevent premature wear
of the chain and sprockets.
Suitable for motorcycles and ATVs.

21pc Universal Motorcycle Chain Tool Kit
For Timing Chains and Drive Chains.
Includes a pair of chain link clip removal pliers
for removal and installation of chain lock clips.
A chain stretch tool that holds both ends of the chain tog

Chain Breaker and Riveting Tool
For Breaking and Joining most Drive Chains from 35 to 630
Pins | Pin Guides | Spring Press Plate | Lever Handle | Chain Press

Heavy Duty Chain Breaker and Riveting Tool
For Breaking / Pressing and Riveting Motorcycle Drive Chains
Tool can be secured using a vice or spanner
3. 4. 5mm Pins

35mm - 45mm Adjustable Fork Seal Driver
Install new seals & bushings into motorcycle forks easily without risk of damage.
Split design for easy use.
Suitable for a wide range of motorcycles.

Motorcycle Brake Caliper Piston Remover
Range : 18mm - 30mm
Universal

9pc Motorcycle Fork Seal Driver Set
For use on conventional and upside-down forks.
Sizes : 35/36 | 39 | 41 | 43 | 45 | 46/47 | 48 | 49/50 | 54 mm.
Allows quick and convenient replacement of fork seals.
without disassembling the fork legs.
Zinc plated with knurled ring for better grip

14pc Motorcycle Fork Seal Driver Set
with Non-marring interchangeable plastic adaptors
allowing for use on forks from 35 to 50mm.
Designed to ensure that the oil seal is installed
at the correct angle on the front fork and is not easily damaged
Can be used for most conventional and upside down front forks
Adaptor Sizes :
35 / 36mm | 40 / 41mm | 42 / 43mm
45 / 46mm | 47 / 48mm | 49 / 50mm

Motorcycle Brake Piston Removal Tool Set
For dismantling motorcycle brakes with sliding Calipers.
Removes frozen Pistons with ease.
Includes 12 universal adaptors - 19 to 30mm.
Will not mark or damage the working part of the Piston.
Suitable for nearly all makes and models

Steering Head Bearing Assembly Tool Kit
for upper and lower steering head bearings
on Harley Davidson / Honda and Kawasaki Motorcycles.
Includes : Press Nut with Crank / Mounting Screw
Nylon Washer / Step Rings / Washer Plate and Pressure Washer.

370mm / 15in. Tyre Lever
Suitable for Motor Cycles and other small vehicles

Motorcycle Lift Table - Heavy Duty
Lifting Range 185 to 850mm
Max. :1000lbs / 450Kg
Hydraulic Operation using 1 Foot to Lift
Safety Valve to Prevent Overload
Set Spindle to prevent unintentional slow lowering
Table Size : 2200 x 660mm
Ramp Size : 690 x 660mm

Hydraulic Motorcycle Jack
For lifting Motorcycles / ATVs / Watercraft and Snowmobiles.
Swivel Castors for easy manoeuvrability.
Foot Pump with release valve.
Lifting capacity : 680kg / 1500lb
Lifting Range : 140mm to 410mm
Bottom size: 84 x 42cm
Salver size: 33.5 x 36cm

Chain Cleaning Brush
for Motorcycles and Bicycles
Helps extend the working life of the drive chain
U-shape end provides all-round cleaning.