Timing Belt Tension Setting Tool Kit
for engine compartments with restricted access.
Ideal for releasing tension on serpentine belts.
Suitable for most vehicles.
3/8in.Dr x 580mm Long with 1/2in.Dr extension
3/8in.Dr Crowfoot Wrenches : 13 | 14 | 15mm
3/8in.Dr Sockets : 15 | 16 | 18mm

5pc Cambelt Tension Pulley Wrench Set
E-Star Sizes : E10 | E12 | E14 | E16 | E18
For biasing the auxiliary belt tension off and on
during installation of the belt in the vehicle.
Slim curved handle for use in confined spaces.

15pc Cambelt Tension Wrench Set
With Interchangeable Heads
for tensioners on auxiliary and timing pulleys.
Includes bar with locking system.
Star : E10 | E12 | E14 | E16 | E18
Sizes : 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19mm

9pc Cambelt Tension Wrench Set
with Interchangeable Heads
For tensioners on auxiliary and timing pulleys
Sizes : 12 to 19mm
Includes bar with locking system.

Universal Camshaft and Crankshaft Pulley Holder
Holds camshaft or diesel pump sprockets and gears
for removal and tightening of retaining bolts.
Interchangeable pins : 3.5 | 4 | 4.5 | 5 | 6 | 7 and 10mm.
Wrench swivels to adjust from 32 - 127mm
1/2in.Dr for use with ratchets or power bars.

Citroen / Peugeot Petrol Engine Camshaft and Crankshaft Seal Installer Kit
Citroen / Peugeot Petrol 1900-2000

Universal Pulley Puller
18mm pulling legs.
8 Slots for holding pulling legs in different positions.
16mm Diameter spindle with cantering ball.
Use with 24mm Socket or Spanner.
Draws pulley by the holes without causing damage.
Movable legs adapt to different pulley diameters.
Suitable for different bolt patterns and distances.

Adjustable Timing Pulley Puller
This tool is designed for removing drive pulleys with face grooves.
Removes pulleys without risk of damage.
Adjustable Legs for different pulley diameters.
For removing pulleys with 3 | 6 | 9 slots.

Sonic Belt Tension Tester
Portable Flexible Probe Tester
Frequency Range : 10 - 600Hz
Includes 20 Memory / Data Storage Settings.
Automatic Power-off when no operation for 5 minutes.
Power off by pressing ON / OFF switch for 2 seconds.
Power Source : 2 AAA battery / not included.

Subaru Crankshaft Socket
1/2in. Drive
For aligning the crankshaft to T.D.C
when working on timing chain servicing or replacement
on 3 or 6 cylinder DOHC engines.
For Subaru models 2006 - 2012 - 2015.

Elastic Ribbed Belt Tool Kit
For the quick and easy removal and installation of Elastic Ribbed Belts
fitted to modern auxiliary drive systems
such as the alternator or power steering.
Suitable for most vehicle makes and models

Puller for Ribbed Drive Pulleys
Length - 200mm | Height - 80mm
Low Profile suitable for most vehicles
Knurled Screws - included
Hex Keys

Stretch Belt Mate Kit
For universal installation and removal of stretch belts.
Allows removal and reuse of stretch belts.
Designed to meet your specific needs.

2pc Stretch Belt Tool Set
Universal tool set for fitting stretch belts to modern vehicles.

Stretch Belt Installation Tool
For PSA / Vauxhall / Opel and Toyota
1.0L and 1.2L 3 cylinder engines from 2012.
Simple and effective method of installing the stretchy type water pump belt.
Ensures correct installation of the elastic belt
whilst reducing the risk of damage to the drive belt.
OEM Codes : 0109-1B | EN-52112-2

Air Condition Belt Installation Tool
for BMW N62 / MINI W17
For installation of stretch belts or drive belts without tensioner
Suitable for stretching belts on -
BMW N62 / V8 2004 - 2006
MINI W17 / Diesel
OEM Code : 641040

Auxiliary Stretch Belt Removal Tool
BMW | Chrysler | Citroen | Fiat | Ford |
Iveco | Mazda | Mercedes | Peugeot | Volvo

Alternator Stretch Belt Tool Kit
For Mounting and Dismounting Alternator Stretch Belts
without Damaging Pulleys and Belts.
With Belt Installers - 32 | 45 | 50mm Diameter
Belt Remover
Self Locking Nut / M8 Fixing Nut and Screws -
M8 x 25 - 5.9mm D
M8 x 40 - 5.7mm D
M8 x 53 - 5.7mm D
M8 x 65 - 5.6mm D Short and Long

Universal Stretch Belt Tool Kit
For use mainly on 1.4 and 1.6 petrol engines
when the double width crankshaft puller restricts access
preventing the belt from being removed or installed.
Use with a 17mm socket.

5pc Auxiliary Belt Tensioner Set
for Ford and PSA Diesel Engines.
Provides a safe and controlled method of adjusting the
tensioner position during removal and installation of the auxiliary belt.
Includes various adaptors along with an extension bar
to allow an extended reach on the raised peg which
can then be used with and appropriate tensioner wrench
and low profile thin walled socket.
Applicable to : 1.4 | 1.5 | 1.6 | 2.0 | 2.2 Diesel Engines.

Mercedes V-Belt Tensioning Tool
For setting the tension wheel and fitting the ribbed belt.
Suitable for Mercedes models : 168 | 169 A-Class | 245 B-Class
Length : 620 mm
Size : 15mm

Auxiliary Belt Tension Spanner
VAG 1.4 Tsi / TFSi Belt Drive Petrol Engine
Designed to provide access to the auxiliary belt tensioner.
1.4 direct injection 4cyl TSi and TFSi Blue Motion engines.
VAG OEM Tool : T10447

Flat Belt Tension Spanner Set
For BMW / Mini engines EP3 / EP6 / N12 / N14 / N16 and N18 >2007
For releasing the tension when removing and installing the serpentine belt.
Wrench Sizes : 21mm / 30mm with 12-point drive
OEM Code : 116210

VW Installation and Tension Lever for ribbed belts
Adjustable automatic belt tension tool with
removable head for maximum flexibility.
Applicable to : VW ASN and BBJ
T4 / Golf / Passat and Polo.

Ford Duratorq Belt Tension Wrench
for Ford Duratorq Engines
2.0 and 2.2L TDDi and TDCi fitted to Mondeo.
8.4mm studs / 51mm centre to centre / 42.6mm between the studs.
Applicable to : Focus 2.4D / 04 - 05
Mondeo 2.0D and 2.2D TDDi / TDCi / 00 - 07
Transit 2.4D / 00 - 06
OEM Code : 303-676.

Auxilliary Belt Tensioner Wrench
For tensioning and loosening the damper spring without damage.
on Mercedes-Benz W169 | W245 Engines
with air conditioning and / or stop-start function :
Suitable for following vehicles :
A-Class W169 / 2004 - 2012
A150 | A160 | A170 | A180 | A200 | A200T
B-Class W245 / 2005 - 2011
B150 | B160 | B170 | B180 | B200 | B200T
OEM Code : 266589003100

Ford Crankshaft Damper Holding Tool
for 2.0 / 2.3 / 2.5 litre engines
Applicable to : Fusion / Transit Milan / MKZ Escape / Ranger Mariner
plus Hybrid Vehicles.

BMW N47 Diesel Crankshaft Locking Tool
For locking the crankshaft in timing position.
Required when replacing one of both timing chains.
Used to measure the amount of chain stretch without dismantling the whole engine.
Applicable to BMW N47 1.6 and 2.0L diesel engines from 2013.

5pc Damper Pulley Wrench Set
18in. / 460mm Long
for holding and retaining the auxilliary belt pulley in place.
Sizes : 13 | 15 | 16 | 17 | 19mm
Ideal for use in confined spaces were access is restricted.
Suitable for all European Vehicles

Ford Crankshaft Holding Tool
Prevents the crankshaft moving when releasing
or tightening the crankshaft pulley fasteners.
The unique head profile permits access via a deep socket to each of the pulley bolts.
Applicable to : Mondeo and Transit 2.0 / 2.2 / 2.4 / 3.2 litre -
Duratorq Di / TDDi / TDCi Diesel and 2.3 Duratec HE petrol engines.
NOTE : Deep socket is not supplied.
OEM Code : 303-1310

Crankshaft Alignment Tool
1/2in.Drive with 2 gears
Used in conjunction with 1/2in.Dr Ratchet
Allows the engine crankshaft position to be manually rotated.
Applicable to :
MAN 12 cylinder engines and
Mercedes 6 / 8 and 10 cylinder engines.

BMW Crankshaft Pulley Holder
For holding the crankshaft pulley while loosening or tightening
the middle pulley bolt then removing and replacing vibration dampers.
Applicable to : BMW N47 and N57 engines.
Vibration Damper Brace
Holding Sleeve and Screw : M8 for N47 / N57
Holding Sleeve and Screw : M10 for N47TU / N57TU

Porsche Vibration Damper Counter Holder
Vibration damper counter holder for Porsche 970 / 92A
Used to counter hold the crankshaft pulley during removal and installation.
Applicable to : Porsche 4.8L V8 / 2010-2018
OEM Code : 00072196791

BMW Crankshaft Pulley Holding Tool
Ideal for holding the front pulley while releasing or tightening
the centre bolt on BMW and Range Rover V8 4.4 petrol engines.
Special profiles allows for counter holding when releasing or
securing the crankshaft central screw.
Applications: M60 / M62 - E31 | E32 | E34 | E38 | E39a
OEM Code : 112450 | LRT12-229

Crankshaft Pulley Tool
Ford / Volvo 1.8 | 2.0 | 2.3 - 16V Duratec Chain Drive Engines.
For counter holding the crankshaft pulley while
the pulley retaining bolt is loosened or tightened.
Ford : C-MAX | Fiesta | Focus | Galaxy | Mondeo | S-MAX |Transit
Volvo : C30 | S40 | S80 | V50 | V70
OEM Code : 9997218

Honda Crankshaft Pulley Holding Tool
Opening : 50mm Hex
Ideal for holding the crankshaft belt pulleys in place,
prevents engine movement when removing and
installing the crankshaft pulley bolt.
OEM Code : 07JAB-0010200.

Audi / VW Crankshaft Pulley Holding Tool
For holding the crankshaft pulley when removing or installing the crankshaft central bolt.
AUDI : A3 | A6 | Q5 2004 onwards
VW : TSI / TFSI engines with chain 1.8T | 2.0L 4V
OEM Code : T10355

VAG Crankshaft Belt Pulley Holding Wrench
Length : 790mm
Applicable to :
VW - Lupo / Polo / New Beetle / Golf / Bora Caddy
Seat Ibiza / Cordoba.
Engine Codes : ARC | AVY
OEM Code :T10028

Crankshaft Pulley Retaining Tool
for PSA / Toyota 1.0L | 1.2L Petrol Engines
For holding the front crankshaft pulley mount
while loosening or tightening the central camshaft bolt.
Fits both 3 and 6 bolt fixing pulley hub types.
Applicable to : Citroen / Peugeot / DS / Opel / Vauxhall and Toyota models.
Engine Ref : EB0 1.0L | EB2 1.2L - 3 cylinder wet belted engines.
Use with 1/2in.Dr Power Bar or Ratchet.

Crankshaft Pulley Holding Tool for Opel
For use with a 1/2in.Dr Power Bar.
Adjustable range : 81mm - 115mm Max
For counter holding the crank shaft belt drive when releasing or
tightening the crank shaft central screws on Vauxhall/Opel
and some Chevrolet models.
Prevents slipping whilst holding.
OEM Code : EN-49979.

Crankshaft Pulley Puller
For removing the vibration damper / pulley
installed on Ford 2.0 EcoBlue TDCi engines
when accessing the timing belt.
Applicable to a range of Ford Vehicles.
OEM Codes : 204-158-01 | 205-295
Crankshaft nose protector spigot / puller.

Ford Crankshaft Pulley Removal Tool
for EcoBlue 2.0L Engines.
This tool ensures the vibration damper can be removed without
causing damage to the bonded rubber section of the pulley.
Applicable to : Kuga / Ranger and Transit.
Thrust bolt / external hex drive - 11mm
Thrust spindle / external hex drive - 19mm
OEM Code : 303-1657

JLR Crankshaft Pulley Tool Set
Crankshaft Pulley removal and holding tool
For Jaguar / Land Rover vehicles.
The Crankshaft Pulley needs to be removed for engine servicing.
Applicable to
Jaguar 3.2 | 3.5 | 4.2 V8 engines
Land Rover 4.2 | 4.4 V8 engines
Engine codes: AJ26 | AJ27 | AJ28 | AJ34

JLR Crankshaft Pulley Service Set
For the removal of the front crankshaft pulley / crankshaft vibration damper
fitted to Jaguar / Land Rover 3.0L V6 and 5.0L V8 Petrol Engines.
The crankshaft pulleys are tightened to 200Nm + 270 degrees
so are very tight to undo and must be held by the holding tool in this kit.
Also included in this kit are the components required to remove the pulley safely.
Applicable to : Jaguar / Land Rover and Range Rover Vehicles - 2009 to 2018.

2 Jaw Pulley Remover
Jaw Length : 72 - 95mm
Jaw Depth : 18mm
Ideal for most vehicles and for use in confined spaces.

Pulley Puller and Installer Set
Removes pressed-on alternator and power steering pulleys
For late model GM / Ford and Chrysler engines
Adapters for Quad 4 engines
Adapters for Ford modular engines

10pc Belt Pulley Puller Set
For removing and installing belt pulleys
power steering pumps / generators and fan wheels etc.
2 cross beams : 140mm and 230mm long
2 pairs of straight pullers : length 60mm and 110mm
1 pair of specifically formed pullers : length 60mm
All pullers and cross beams can be combined
Suitable for pulley diameter up to 200 mm

Heavy Duty Pulley Puller
Adjustable Jaw Tension
Pulls pressed-on 1 and 2 groove pulleys
For Alternators and Power Steering Pumps / also Alternator Bearings

Power Steering Pump Pulley Kit
For Ford | Chrysler and GM vehicles
With Saginaw / Thompson/ Ford C111
and C2 power steering pumps.
Fits many pulley hub diameters including
engines with a metric shaft.

Universal Harmonic Balance Puller
Installation and Removal Tool Kit
with Puller Plate and 4 sets of 3 screws
Centre bolt 10mm and 9 adaptors
For use on the crank pulley damper /
crankshaft damper / torsion damper
or vibration damper for drive belts

Balance Shaft Puller with Slide Hammer
For VAG 1.8L | 2.0L 4 cylinder petrol chain driven injection engines.
Audi - 2007 to 2017
Seat - 2006 to 2017
Skoda - 2007 to 2017
Volkswagen - 2007 to 2017
OEM Code : T10394

46pc Harmonic Balance Puller Set
Removes Harmonic Balancers / Gear Pulleys
Steering Wheels and Crank Shaft Pulleys
Zinc Plated Yoke and Bolts
5in. Pressure Screw
Small Cantering Adaptor
Large Cantering Adaptor
Flat Shaft Adaptor

Oil Pump / Balance Shaft Alignment Kit
for BMW 1 | 2 | 3 | 4 Series - 6L / 2.0L Petrol Engines.
For fixing the balance shaft and holding the chain sprocket
when used for repairing the chain and sprocket wheel drive.
Applicable to Engine Codes : N20 | N26 2012 - 2017
OEM Codes : 2 212 825 | 2 318 117 | 11 4 120

Balance Shaft Alignment Tool Set
for BMW - B47 / B48 / N47 Engines
Designed to lock the balance shafts
in the correct timed position during engine rebuild.
Applicable to :
Series - 1 | 2 | 3 | 4 | 5
X1 | X3 | X4 | X5
Mini Clubman and Hatch

OEM Codes : 2288054
118750 | 118790 | 118791 | 118792 | 118793

Balancer Shaft Removal / Alignment Kit
for BMW B37 Diesel Engines | B38 Petrol Engines
Applicable to :
BMW 1 / 3 Series 2015 to 2017
BMW 2 Series 2014 to 2017
BMW X1 2015 to 2017
BMW i8 2015 to 2017
Mini Clubman 2015 to 2017
Mini Convertible 2016 to 2017
OEM Codes : 2288943 | 2288942 | 2358646

Balance Shaft Tool Set
For adjusting the balance shaft on the following vehicles :
JLR : ED4 | TD4 | TD4E / 2009 - 2015.
Citroen : C5 | C5 II | C5 III | C6 | C8 | C-Crosse Hdi / 2000 - 2015.
Mitsubishi Outlander : DI-D | DI-OC / 2007 - 2013.
Peugeot : 4007 | 407 | 607 | 807 | 406 | 508 | 607 | Hdi | GT Hdi / 2000 - 2015.
Ford : Galaxy | Mondeo | S-Max | TDCI | TCI / 2018 - 2015.

BMW Crankshaft Harmonic Balance Tool
for BMW 3 & 5 Series.
Engines : E39 | E46 | E60 | E61 | E81 | E83 | E90 | E91
Holds vibration damper when loosening and tightening centre crankshaft bolt.

Harmonic Damper Holding Tool - Honda
1/2in.Dr 50mm offset socket
For maintaining the harmonic damper pulley position
while removing / installing the pulley bolt.
Use with a 1/2in.Dr Ratchet or Power Bar.

Crankshaft Harmonic Balancer Holding Tool
for Mercedes 1.6 | 1.8 from 2002 to 2018
Designed to securely hold the Harmonic Balancer / crankshaft pulley
while undoing or tightening the crankshaft pulley fixing bolts
in Mercedes 1.6 and 1.8L petrol engines on -
C / CLC / E / CLS / SLK / CLK Class / Sprinter.
OEM Code : 271589004000.

Harmonic Damper Pulley Puller
for Chrysler / GM / Hyundai and Mazda
3-Jaw Puller with 3 Lengths of Forcing Rods.
Puller separates the harmonic balancer from the crankshaft.
With harmonic balancer holding tool for tightening or loosening
the crankshaft bolt or removing the balancer.

Crankshaft and Camshaft Seal Remover and Installation Kit
Includes 2 Seal removers for multiple applications
Angled blades for removing seals in limited access

Crankshaft Seal Remover / Installer Kit
Seal sizes - 27mm and 58mm in diameter.
Universal covering a wide range of vehicles.
Use the existing bolt in the vehicle for installation.
Screw-type adapter to aid cantering the seal.
With Aluminium Blue Seal Adapters to prevent crank damage.

7pc Crank / Camshaft Radial Seal Ring Extractor Set
for VAG Petrol Engines : Lupo and Polo 1.4 | VR6 | Audi V6
Short Extractors : 25 | 32 | 35 | 27| 55mm Diameter
Long Extractor : 32mm Diameter
Pilot Pin Socket :19mm Hex x 60mm-L x P1.25
For removing rotary shaft seals and radial sealing rings.
Grips the seal from the inside with its conical profile
Suitable for most commercially available sealing rings.

Front Main Crankshaft Oil Seal Installer - Isuzu 3.5T
For the correct fitment of the front crankshaft oil seal
on 3.5 tonne Isuzu Truck Diesel Engines
to prevent the oil seal from damage on installation.
Vehicle applications :
N-Series trucks | D-Max and Trooper.
Engine : 4JG2 | 4JH1 - 110HP / 130HP
OEM Code seal numbers : BZ 4961E

Rear Main Crankshaft Oil Seal Installer
for Isuzu 3.5 Tonne Trucks
For correctly fitting the rear crankshaft oil seals
preventing the oil seal from damage when installing.
130 to 140 HP Engines : N-Series Trucks | D-Max | Trooper.
4JK1 / 2.5 | 4JB1 / 2.8L | 41JG1 / 3.1L | 4JH1 / 3.0L
OEM Codes : EN-50351 | 5-8840-2359-0.
Seals OEM : BZ4962-E | 8-97071-561-1

BMW Front Crankshaft Seal Installer
for BMW B47 | B48 | B57 | B58 Engines
Applicable to : Series 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 / 2014 - 2021
X3 | X4 | X5 | X6 | X7 | Z4 / 2014 - 2021
Petrol : 2.0L / 1.6L / 3.0L | Diesel : 2.0L / 3.0L
OEM Code : 118801 / 2 / 3 / 4

BMW Front Crankshaft Seal Installer
For removing or installing the front crankshaft oil seal on BMW model engines :
N40 | N42 | N45 | N45T | N46 | N46T | N52 | N53 | N54
BMW model engines.
OEM Codes : 119230 | 119231 | 119233 | 119235 | 2212822

BMW Crankshaft Oil Seal Kit
For removal and installation of the rear crankshaft oil seal.
Applicable to :
N40 | N42 | N45 | N45T | N46 | N46T | N52 | N53 | N54.
OEM Code : 2212827

BMW Crankshaft Seal Tool Set
For removing and installing the front and rear crankshaft seal.
Applicable to :
N20 / N26 / N40 / N42 / N45 / N45T
N46 / N46T / N52 / N53 / N54 / N55
OEM Codes :
110370 | 119181 | 119182 | 119183

BMW Front Crankshaft Timing Case Cover Remover / Installer
For correcting alignment of the front crankshaft timing case cover / at bottom
also helps prevent damage to the new seal during fitting.
Applicable to : BMW 1 | 2 | 3 | 4 Series - X1 | X2
Mini Clubman / Hatch / Countryman.

Mercedes Crankshaft Oil Seal Installation Kit
Used to install the front and rear crankshaft oil seal.
Applicable to:
M102 | 111 | 112 | 113 | 137 | 156 | 159 | 272 | 275 |
285 | 601 | 602 | 603 | 604 | 605 | 606 | 628 | 629.
OEM Codes :119589011400 | 11589084300

Mercedes Crankshaft Oil Seal Installation Kit
Specifically designed to install crankshaft front and rear seals
on Mercedes M651 diesel engines .
OEM Codes : 651589006100 | 651589016100

Ford Crankshaft Front Oil Seal Installer
for 1.0 / 1.1 Ti-VCT Ecoboost Engines
Quick and easy locating of crankshaft seal to the housing.
Enables accurate installing of the seal to the correct depth.
No damage to the seal and engine housing.
OEM Codes : 303-1603 | 303-1636.

3 Jaw Pilot Bearing Puller
Suitable for sleeve-type bearings : 16 - 50.8mm diameter.
Ideal for flywheel bearings / pump bearings and generator / starter bearings without tilting the bearings or damaging the bearing race.
For servicing motor vehicles / motorcycles and lawn mowers etc.

VAG Vibration Damper Assembly Tool
Specially designed to fix the timing chain drive sprockets
while installing and removing the vibration damper on
VAG 1.8L / 2.0L TFSi / TSi EA888 engine.
Applicable to Audi / Seat / Skoda / Volkswagen
Vibration damper holding tool.
Crankshaft sprocket holding tool / adapter and nut.

Vibration Damper Puller Removal Tool
For separating the vibration damper from
the gear wheel of the crankshaft.
Suitable for 2.0TDi Bi-Turbo engines on
Volkswagen Transporters T6 from 2017.
4 Cylinder Common Rail 2.0L Engines : CXEB | CXEC
OEM Code : T50071.
Allows damage-free removal of the vibration damper
with internal Thread : M22 x 1.5mm.

Universal Flywheel Turning Tool
For turning and holding Flywheels and Flexplates.
Easily turn engine from underneath the vehicle.
Great for working on clutches / transmissions or installing rings
and other jobs that require the crankshaft to be in a certain position.

BMW / Mini Crankshaft Turning / Holding Kit
Specially designed to rotate the crankshaft and fix the flywheel.
Crankshaft Pulley Turning Tool
Flywheel Drive Plate Holding Tool
Securing Bolt and Spacer
Flywheel Bolt Socket

BMW Flywheel Locking Tool
for BMW / MINI engines -
N40 to N73 | M47TU | M54 | M57T2/TU | S85 | W17.
With Counter Holder / Spacer Sleeves /
Reduction Sleeve and Mounting Screws.
For locking the flywheel when loosening or
tightening the pulley and the flywheel itself.

Ford Flywheel Locking Tool
For loosening and tightening the flywheel and crankshaft pulley
With Base Plate and 3 pawls : 11mm | 29.5mm | 41.2mm.
Suitable for a wide range of Ford Engines up to 2017.
OEM Codes : 21-168
303-1272 | 303-393 | 303-393-01 | 303-393-02

Timing Tool Set
For Camshaft / Crankshaft and Flywheel Locking.
Allows inspection and adjustment of engine timing
on Ford / Peugeot / Rover / Volvo - 2.0 | 2.2LD vehicles.

BMW Flywheel Tool Set
For Diesel and Petrol chain drive engines.
Found on most BMW K | M | N models
The tool can also be used to hold the flywheel when
removing the timing chain for cylinder head work.

JLR Balance Shaft Service Kit
for Jaguar / Land Rover 2.0L Diesel Engines
Designed for the removal / refitting and setting of the balance shafts
on the Jaguar Land Rover AJ200 2.0L Diesel Engines.
Applicable to:
Jaguar E-Pace / F-Pace / XE / XF
Land Rover Discovery / Sport
Range Rover Evoque / Sport / Velar

Mercedes Flywheel Locking Tool
for Mercedes-Benz - A / B Class and CLA / GLA
Designed to fit in place of the starter motor to lock the crankshaft
via the flywheel ring gear on the Mercedes-Benz engines.
Applicable to :
A class / 2013 - 2019 | B class / 2012 - 2019
CLA / 2013 - 2019 | GLA / 2014 - 2020

Mercedes Flywheel Retaining Tool
for Mercedes-Benz 1.8 | 2.1 M651 Diesel Engines.
Bolts in place of the starter motor to lock the flywheel
to prevent it turning when removing the crankshaft front pulley fixings
Applicable to : A / B / C / CLA / E / GLA / GLK / V Class - 2008
Also light commercials vehicles - Sprinter / Viano and Vito
OEM Code : 651589024000

Flywheel Locking Tool
for Mercedes / Renault / Dacia - 0.9L | 1.3L | 1.6L Petrol Engines
For locking the flywheel to allow easy removal
of the crankshaft pulley and flywheel bolts.
Applicable to : Mercedes-Benz A / B class / CLA / GLA / GLB.
Renault Arkan / Clio V / Captur / Kadar / Megane and Talisman.
Dacia Dokker / Duster and Lodgy

41mm Water Pump Wrench - 1/2in.Dr
For use on older GM - Vauxhall / Opel engines
where the water pump is used to adjust the camshaft belt tension.
Also used on Chevrolet / Daewoo vehicles.
Engines : 1.2 / 1.3 / 1.4 / 1.6V / 1.6D / 1.8
OEM Codes : KM421A | J-42492 | J-42492-A

46mm Water Pump Wrench - 1/2in.Dr
For use on older Vauxhall / Opel engines
where the water pump is used to adjust the camshaft belt tension.
Engines : 1.6 ( 87 ) 1.7D / 1.8 ( 87 ) / 2.0 litre
OEM Code : KM409A

Flywheel & Front Pulley Locking Tool Set
for 1.4 | 1.6 | 2.0 | 2.5 | 3.5 CD Petrol Engines
on Renault / Nissan vehicles.
Also for flywheel locking on M9R / 2.0 Diesel
and M9T / 2.3 Diesel Engines.
Engine Codes :
H4JT | M5M | MR4 | 2TR | V4Y

VAG Crankshaft Locking Pin - M14 x 1.5
for locking the crankshaft in TDC position
while Replacing the timing belt on
Audi A6 2005 models with 6 cylinder 2.4 / 3.2 FSI engines
OEM Code : T40069

VAG Crankshaft Turning Adaptor
22mm Square with 12mm Rotating Pivot Pin
Dual Drive : 1/2in.Dr plus 24mm Hex
Used for turning the crankshaft pulley.
Applicable to : 2.4 | 3.2 | 4.2 FSI Engines.
OEM Code : T40058

VAG Crankshaft Locking Tool Set
Suitable for VW Touareg 2003 >
Phaeton 2003 > with 10 cylinder Diesel Engines.
For locking crankshaft when adjusting engine timing.
Adjusting bolts for mounting the engine control module

OEM Codes : T10195 | T10200

VAG Crankshaft Seal Flange Remover and Installer
for 1.4 and 1.6 - 16 Valve VAG engines
fitted to Audi / Skoda / Fiat and VW vehicles
Specific tool vital to ensure the correct alignment
of the main seal house crankshaft sensor.
The Seal housing carries the crankshaft sensor mounting.
OEM Code : T10017

VAG Crankshaft Seal Flange Installation Tool
Designed to renew the crankshaft oil seal on Audi / VW vehicles
Applicable to 16V / 20V - 1.9 / 2.0 Diesel Engines since 2006.
For 4 Valve Diesel engines with integrated sender wheel.
Audi A3 4-cyl. VW Golf / Touran
OEM Code : T10134

VAG Crankshaft Oil Seal Tool
Designed for VW 2.5 TDI | 2.5 Blue TDI Engines.
The flywheel end oil seal is integral with the oil seal housing
and speed sender and is supplied with a new timing ring.
If the oil seal is faulty then the whole assembly must be renewed.
Suitable for VW Crafter 2.5L / 2006 - 2013
Engine Codes : BJJ | BJK | BJL | BJM | CEBA | CEBB | CECA | CECB
OEM Code : T50010

VAG Camshaft Pulley Holding Tool Set
For holding the pulleys and sprockets on the
camshaft / crankshaft / oil pump and water pump
while loosening and tightening the fixing bolts.
also suitable for the Common-Rail Diesel Pump-Nozzles
Suitable for Audi | Seat | Skoda | Volkswagen models.

Ford A/C Compressor Clutch Pulley Retaining Tool
3/8in.Dr - Required when changing the A/C pump or pulley.
Applications : Ford vehicles 2010 - 2015
C-Max / B-Max / Ecosport / Edge / Fiesta / Focus
Galaxy / Kuga / S-Max / Transit Courier
OEM Code : 412-134

Ford A/C Compressor Clutch Pulley Retaining Tool
3/8in.Dr - Required when changing the A/C pump or pulley
Holds the compressor pulley still allowing the fixing bolt to be removed.
Ford vehicles from 2012 -
Transit and Transit Custom Hybrid PHEV.
OEM Code : 412-157

Ford A/C Compressor Clutch Pulley Retaining Tool
3/8in.Dr - Required when changing the A/C pump or pulley.
Holds the compressor pulley still allowing the fixing bolt to be removed.
Ford vehicles 2010 - 2017
C-Max / Focus / Kuga / Transit Connect / Courier / Ka / Fiesta.
OEM Code : 412-154

Ford A/C Compressor Clutch Pulley Retaining Tool
3/8in.Dr - Required when changing the A/C pump or pulley
Holds the compressor pulley still allowing the fixing bolt to be removed.
Ford vehicles from 2008 - 2015
Fiesta / from 2008
B-Max / from 2012
C-Max / from 2010 & 2015
OEM Code : 412-103

Flywheel Locking Tool
For locking the flywheel via the starter motor aperture.
on Hyundai and Kia vehicles with petrol engines from 2007 to 2018.

DAF Commercial Vehicle Crankshaft Alignment Tool
This heavy duty tool allows crankshaft rotation via the flywheel.
6 point drive x 24mm x 11 teeth
Applicable to 35T DAF trucks :
65CF | 75CF | 85CF | 95XF | CF75 | CF85
F65 | F75 | F85 | F95 | XF95

DAF Engine Crankshaft Alignment Tool
1/2in. Drive
For manually rotating the engine crankshaft into position.
Applicable to : DAF XF105 / Euro5